2 layers200 × 100 mm
Polykit x monosynth
polykit/polykit-x-monosynth
The Polykit X1 is a DIY semi-modular, analog, patchable synthesizer
167 parts94
2 layers19.3 × 106.5 mm
Kick-808
marangisto/Kick-8088TR-808 Kick Clone
- Size
- 19.3 × 106.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 45
- Pads
- 186
- Tracks, vias
- 457, 43
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Sep 2019
- Updated
- 12 Jul 2020
Overview
Kick-808 is an open-source printed circuit board by marangisto, from the marangisto/Kick-808 repository on GitHub, published under the MIT licence. It is a 2-layer board of 19.3 × 106.5 mm with 70 parts on 45 nets, routed with 457 tracks and 43 vias.
It is built around the TL072, BC847 and BC857. Its parts include 32 resistors, 15 capacitors, 7 transistors, 3 diodes and 2 ICs.
Main components
3
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
BC847
SOT-231 NPN 100MHz 100mA 100nA 110 200mW 45V 500mV 6V NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)BC857
SOT-231 PNP 100MHz 100mA 15nA 200mW 45V 5V 650mV 800 PNP SOT-23 Bipolar (BJT) ROHSSTMicroelectronicsBipolar (BJT)
README
README.mdKick-808
TR-808 Kick Clone
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R6, R11, R16, R18, R23, R26 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C6, C7, C14, C15 |
| 6 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q4, Q5, Q6, Q7 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R10, R14, R25, R29 |
| 3 | 100k | Local:AlpsRK09K | Decay1, Mod2, Tone1 |
| 3 | 15n | Capacitor_SMD:C_0603_1608Metric | C5, C9, C10 |
| 3 | 1M | Resistor_SMD:R_0603_1608Metric | R12, R19, R20 |
| 3 | 1N4148 | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R21, R28, R32 |
| 3 | 4k7 | Resistor_SMD:R_0603_1608Metric | R13, R17, R27 |
| 3 | AudioJack2_SwitchT | Local:PJ398SM | Accent1, Output1, Trigger1 |
| 2 | 22k | Resistor_SMD:R_0603_1608Metric | R9, R15 |
| 2 | 22u | Capacitor_SMD:CP_Elec_5x5.4 | C3, C4 |
| 2 | 47k | Resistor_SMD:R_0603_1608Metric | R4, R31 |
| 2 | Ferrite_Bead | Inductor_SMD:L_0603_1608Metric | FB1, FB2 |
| 2 | TL072 | Package_SO:TSSOP-8_4.4x3mm_P0.65mm | U1, U2 |
| 1 | 10k | Local:AlpsRK09K | Mod1 |
| 1 | 10u | Capacitor_SMD:CP_Elec_4x5.8 | C13 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 200k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 2k7 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 33n | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 680 | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 8k2 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | BC857 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMD | J3 |
| 1 | SW_Push_LED | Local:SW_PUSH_LED_6mm | SW1 |
Similar boards
- 2 layers281.1 × 236.5 mm
MiniDrumkit2
Fihdi/MiniDrumkit
Eurorack DrumKit module with a 3 channel wave-file player and analog Hi-Hat and Kick Drum sections
239 parts15MIT - 2 layers58.4 × 50.8 mm
Haible tau phaser plug in board
JordanAceto/VCF_plug_in_boards
Various small synthesizer Voltage Controlled Filter pcbs
140 parts11CC-BY-4.0 - 4 layers190 × 135 mm
- 2 layers60 × 55 mm
- 4 layers118 × 88 mm
Vinyl adc rev e
MadsRudolph/vinyl-adc
Discrete 3rd-order delta-sigma stereo audio ADC, built from op-amps and logic gates: a four-layer Raspberry Pi HAT made by PCBWay, with KiCad files, SPICE simulations and measurements
184 parts1 - 2 layers28 × 100 mm
- 4 layers124.6 × 68.7 mm
Questions
How big is the Kick-808 PCB?
It measures 19.3 × 106.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kick-808 use?
70 parts, built around the TL072, BC847 and BC857. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kick-808 KiCad files?
From the marangisto/Kick-808 repository on GitHub, at the commit this page was made from: the board is Kick-808.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kick-808 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).