2 layers89.5 × 97.5 mm
Wearablesystem
manushri-d/ece445
This repo is used for our Senior Design class where we put all of our updates for the semester!
65 parts
2 layers98.7 × 98.4 mm
Mounted system
manushri-d/ece445This repo is used for our Senior Design class where we put all of our updates for the semester!
- Size
- 98.7 × 98.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 57
- Pads
- 205
- Tracks, vias
- 445, 60
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 6 Nov 2024
- Updated
- 11 Dec 2024
Overview
Mounted system is an open-source printed circuit board by manushri-d, from the manushri-d/ece445 repository on GitHub. It is a 2-layer board of 98.7 × 98.4 mm with 55 parts on 57 nets, routed with 445 tracks and 60 vias.
It is built around the ESP32-C3, USBLC6-2SC6 and SPX3819M5-L-1-8, with the SPX3819M5-L-3-3 among its other parts. Its parts include 23 capacitors, 10 resistors, 6 ICs, 5 connectors and 3 transistors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4
ESP32-C3
QFN-32-EP(5x5)12bit 160MHz 22 3V~3.6V Others QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
SPX3819M5-L-1-8
SOT-23-5-40℃~+125℃@(Tj) 1 1.8V 20V 500mA 500mV@(100mA) 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdTeam 41 FA 2024 ECE 445 Digital Lab Notebook
This repo is used for our Senior Design class where we put all of our updates for the semester!
Check this link for more information on our project (as well as some other projects!)
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C7, C8, C9, C11, C12, C13, C18, C20, C21 |
| 7 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C14, C15, C17, C22, C23 |
| 6 | 5k1 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R4, R5, R12, R13 |
| 3 | NMOS | Package_TO_SOT_THT:TO-247-3_Vertical | Q1, Q2, Q3 |
| 2 | 10p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | 2n2 | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L2, L3 |
| 2 | 3p3 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C19 |
| 2 | 470R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645 | SW1, SW2 |
| 2 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3, U7 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | 22R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 2n | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | 40Mhz | Crystal:Crystal_SMD_EuroQuartz_MQ-4Pin_7.0x5.0mm_HandSoldering | Y1 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.00mm:PinSocket_1x04_P2.00mm_Vertical | J1 |
| 1 | Conn_01x05_Pin | Connector_PinSocket_2.00mm:PinSocket_1x05_P2.00mm_Vertical_SMD_Pin1Right | J4 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.00mm:PinSocket_1x06_P2.00mm_Vertical_SMD_Pin1Right | J5 |
| 1 | Conn_Coaxial | Connector_Coaxial:MMCX_Molex_73415-1471_Vertical | J2 |
| 1 | ESP32-C3 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | LOGO | LOGO | G*** |
| 1 | SPX3819M5-L-1-8 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J3 |
| 1 | W25Q16JVUXIQ TR | 2M Flash:USON-8_UX_2x3x0p6_WIN | U2 |
Questions
How big is the Mounted system PCB?
It measures 98.7 × 98.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mounted system use?
55 parts, built around the ESP32-C3, USBLC6-2SC6, SPX3819M5-L-1-8 and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mounted system KiCad files?
From the manushri-d/ece445 repository on GitHub, at the commit this page was made from: the board is mounted_system/mounted_system.kicad_pcb and its schematic mounted_system/mounted_system.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mounted system design in my own project?
Its repository states no licence, so its author keeps all rights: ask manushri-d before reusing the design.
More from manushri-d/ece445
1Similar boards
- 4 layers35.6 × 17.8 mm
- 4 layers18 × 38 mm
LoFive
Roshan-khatri78/Electronics-Projects-KiCad-
A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.
28 parts2 - 4 layers33.9 × 41 mm
- 2 layers30 × 18 mm
- 2 layers20 × 20 mm
- 2 layers61.2 × 27.4 mm
- 4 layers40.8 × 20 mm
Esp
souptik-samanta/esp32c3
A compact, custom-designed ESP32-C3 development board with USB-C connectivity, onboard antenna, and a clean PCB layout.
48 parts - 2 layers26 × 26 mm
