Skip to the content
2 layers44.7 × 71 mmManiacalRoller, the printed circuit board in 3D
Size
44.7 × 71 mm
Copper layers
2
Thickness
1.6 mm
Parts
39
Nets
47
Pads
152
Tracks, vias
380, 9
Routed
Yes
KiCad
KiCad 4
Created
8 Feb 2017
Updated
20 Mar 2017

Overview

ManiacalRoller is an open-source printed circuit board by ManiacalLabs, from the ManiacalLabs/ManiacalRoller repository on GitHub. It is a 2-layer board of 44.7 × 71 mm with 39 parts on 47 nets, routed with 380 tracks and 9 vias.

It is built around the ATMEGA328P-PU, 74LS148P-E and HDSP-523E. Its parts include 19 resistors, 8 switches, 2 capacitors, 2 ICs and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

3

README

README.md

ManiacalRoller

Parts

39
QtyValueFootprintReferences
9100Resistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9
8100kResistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR10, R11, R12, R13, R14, R15, R16, R17
20.1uFCapacitors_ThroughHole:C_Disc_D3.0mm_W1.6mm_P2.50mmC1, C2
21.2kResistors_ThroughHole:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR18, R19
2Q_NPN_EBCTO_SOT_Packages_THT:TO-92_Inline_Narrow_OvalQ1, Q2
174LS148Housings_DIP:DIP-16_W7.62mm_Socket_LongPadsU1
1ATMEGA328P-Pmod:DIP28IC1
1AVR-ISP-6mod:ICSP_SimpleCON1
1BTN_coinButtons_Switches_ThroughHole:SW_PUSH_6mmSW1
1BTN_d10Buttons_Switches_ThroughHole:SW_PUSH_6mmSW5
1BTN_d100Buttons_Switches_ThroughHole:SW_PUSH_6mmSW8
1BTN_d12Buttons_Switches_ThroughHole:SW_PUSH_6mmSW6
1BTN_d20Buttons_Switches_ThroughHole:SW_PUSH_6mmSW7
1BTN_d4Buttons_Switches_ThroughHole:SW_PUSH_6mmSW2
1BTN_d6Buttons_Switches_ThroughHole:SW_PUSH_6mmSW3
1BTN_d8Buttons_Switches_ThroughHole:SW_PUSH_6mmSW4
1BatteryBattHolder:2xAABatteryHolder_24mm5x53mmBT1
1HDSP-523EHDSP-523E:HDSP-523ESEG1
1LOGOmod:logo_MLlabs_smallG***

The 37 most common of 39 parts.

Similar boards

  • 2 layers77.2 × 54.6 mmPCD with routing, the printed circuit board in 3D

    PCD with routing

    mariam-essam2/Timer-555-PCB-project

    A hardware-based 60-minute Pomodoro timer with dual 7-segment displays, manual/auto-reset, and buzzer alert. Fully simulated, tested, and ready for PCB fabrication with complete schematics, footprints, and Gerber files

    23 parts
  • 2 layers126.5 × 74.8 mmVIC Cart 1, the printed circuit board in 3D

    VIC Cart 1

    hansliss/VIC_Cart_1

    A basic programmable RAM/ROM expansion for VIC-20

    29 partsAGPL-3.0
  • 4 layers160 × 100 mmRosco m68k, the printed circuit board in 3D

    Rosco m68k

    rosco-m68k/rosco_m68k

    Design, documentation and software for the Really Old School Computer (M68K)

    140 parts200
  • 2 layers134.6 × 208.3 mmTs2, the printed circuit board in 3D

    Ts2

    jefftranter/68000

    Code related to the Motorola 68000 microprocessor.

    110 parts133
  • 6 layers243.8 × 243.8 mmRaven, the printed circuit board in 3D

    Raven

    agranlund/raven

    Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

    331 parts87
  • 4 layers214 × 170 mm.C68, the printed circuit board in 3D

    .C68

    ProbablyNotArtyom/Blitz

    Blitz is a 68030 based homebrew computer I designed over the course of nearly 3 years, starting in late 2017.

    185 parts51GPL-2.0
  • 2 layers159.5 × 99.8 mmM68kcomp1, the printed circuit board in 3D

    M68kcomp1

    jtsiomb/m68kcomputer

    Homebrew Motorola 68010 computer

    55 parts32CC-BY-SA-4.0
  • 4 layers340 × 210 mmYddraig, the printed circuit board in 3D

    Yddraig

    ddraig68k/hardware

    Schematic and CAD files for my 68K based computer

    224 parts29MIT

Questions

How big is the ManiacalRoller PCB?

It measures 44.7 × 71 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ManiacalRoller use?

39 parts, built around the ATMEGA328P-PU, 74LS148P-E and HDSP-523E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ManiacalRoller KiCad files?

From the ManiacalLabs/ManiacalRoller repository on GitHub, at the commit this page was made from: the board is kicad/ManiacalRoller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ManiacalRoller design in my own project?

Its repository states no licence, so its author keeps all rights: ask ManiacalLabs before reusing the design.