2 layers178 × 145 mm
Ultra DB X51 v1
ExploreEmbedded/8051_DevelopmentBoard
Design files and sample code for 8051 development Ultra Boards
145 parts70
2 layers38.1 × 47 mm
L293-breakout
mancusoa74/L293D-BreakoutSimple breakout board for L293D to implement a basic DC Motor driver for Ardino/Raspberry Pi
- Size
- 38.1 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 12
- Pads
- 36
- Tracks, vias
- 63, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Aug 2017
- Updated
- 7 Aug 2017
Overview
L293-breakout is an open-source printed circuit board by mancusoa74, from the mancusoa74/L293D-Breakout repository on GitHub. It is a 2-layer board of 38.1 × 47 mm with 9 parts on 12 nets, routed with 63 tracks and 0 vias.
It is built around the L293D. Its parts include 4 connectors, 2 capacitors, 1 resistor, 1 IC and 1 diode. It belongs with the robots and motor control and interfaces and adapters boards of this library.
Main components
1README
README.mdL293D-Breakout
Simple breakout board for L293D to implement a basic DC Motor driver for Ardino/Raspberry Pi.
More information can be found here
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Screw_Terminal_1x02 | Connectors_Terminal_Blocks:TerminalBlock_Pheonix_MPT-2.54mm_2pol | J1, J2, J3 |
| 1 | 220 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | C | Capacitors_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2 |
| 1 | CONN_01X06 | Connectors:PINHEAD1-6 | J4 |
| 1 | CP1 | Capacitors_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | L293D | Housings_DIP:DIP-16_W7.62mm_LongPads | U1 |
| 1 | LED | LEDs:LED_D3.0mm | D1 |
Questions
How big is the L293-breakout PCB?
It measures 38.1 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the L293-breakout use?
9 parts, built around the L293D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the L293-breakout KiCad files?
From the mancusoa74/L293D-Breakout repository on GitHub, at the commit this page was made from: the board is kicad-project/L293-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the L293-breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask mancusoa74 before reusing the design.
Similar boards
- 2 layers84.3 × 58.4 mm
EnocderDriver
NikodemBartnik/Small-Projects
All of smaller projects (Arduino, PCBs, electronics, code)
35 parts55 - 2 layers56.4 × 72.6 mm
Ras pi hat
geno543/Redropi_highway
the project aims to detect asteroids and meteor movement using high-quality cameras and radar detection methods using an AI model for accurate analysis, and it classifies bodies be in three categories: non-meteor…
8 parts13 - 2 layers87.5 × 70 mm
- 2 layers92.5 × 62.5 mm
DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers47.5 × 49.5 mm
- 2 layers120.7 × 184.1 mm
- 2 layers90 × 53.4 mm
