2 layers51.5 × 89 mm
2 layers88 × 46.6 mm
PCB for a Raspberry Pi Zero-based cluster node for a multi-media playback channel
- Size
- 88 × 46.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 58
- Pads
- 139
- Tracks, vias
- 187, 93
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 7 Nov 2022
- Updated
- 7 Nov 2022
Overview
NE2Pi is an open-source printed circuit board by Manawyrm, from the Manawyrm/NE2PI-Node-PCB repository on GitHub. It is a 2-layer board of 88 × 46.6 mm with 35 parts on 58 nets, routed with 187 tracks and 93 vias.
It is built around the MC34063AD and SS210. Its parts include 10 capacitors, 8 resistors, 5 connectors, 3 ICs and 1 diode. It belongs with the Raspberry Pi (Linux) boards of this library.
Main components
2Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10µF 25V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C6 |
| 3 | 500mA 300mΩ | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1, FB2, FB3 |
| 2 | 100nF 50V | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 1µF 50V | Capacitor_SMD:C_1206_3216Metric | C9, C10 |
| 2 | 75R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 2 | MountingHole | ToolingHole:ToolingHole_JLCSMT | H1, H2 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 150R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 180R | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 2.7k | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 2R | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 33nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 470uH 240mA | Inductor_SMD:L_7.3x7.3_H3.5 | L1 |
| 1 | 62k | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 680pF 50V | Resistor_SMD:R_0805_2012Metric | C4 |
| 1 | Backplane Bottom | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Horizontal | J4 |
| 1 | Backplane Passthru | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Horizontal | J5 |
| 1 | Boost voltage supply | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1 |
| 1 | FTDI_UART | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | MC34063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | MDLP3W104A | ALPS_MDLP3W104A:ALPS_MDLP3W104A | U1 |
| 1 | RaspberryPi_Zero_Dummy | RaspberryPiZero_Dummy:RaspberryPiZero_Dummy | U2 |
| 1 | Raspberry_Pi_Header | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | Raspberry_Pi_TV_Header | Connector_PinSocket_2.54mm:PinSocket_2x02_P2.54mm_Vertical | J2 |
| 1 | SS210 | Diode_SMD:D_SMA | D1 |
| 1 | USB OTG Pins | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | TP1 |
Questions
How big is the NE2Pi PCB?
It measures 88 × 46.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NE2Pi use?
35 parts, built around the MC34063AD and SS210. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NE2Pi KiCad files?
From the Manawyrm/NE2PI-Node-PCB repository on GitHub, at the commit this page was made from: the board is NE2Pi.kicad_pcb and its schematic NE2Pi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NE2Pi design in my own project?
Its repository states no licence, so its author keeps all rights: ask Manawyrm before reusing the design.
Similar boards
- 2 layers70 × 36 mm
Air Purifier Uppatvind
horvathgergo/esp8266-for-uppatvind
Smart controller for IKEA Uppåtvind Air Purifiers
27 parts60GPL-3.0 - 2 layers98 × 40 mm
Air Purifier Fornuftig Switch
horvathgergo/esp8266-for-fornuftig
Smart controller for IKEA Förnuftig Air Purifiers
23 parts31GPL-3.0 - 2 layers116.6 × 93.3 mm
- 2 layers73.9 × 46 mm
- 4 layers282.8 × 122.9 mm
- 2 layers50.8 × 68.6 mm
MCU Board
caipiblack/STM32-CAN-Bus-board
This is an STM32F042K6T6 based board that can be used to build sensors that communicate over a CAN bus
26 parts5GPL-3.0 - 2 layers52.2 × 79 mm
Programmable light
dilshan/programmable-light
Simple time based programmable light controller
55 parts5MIT