2 layers110 × 60 mm
Arduino Spot Welder
KaeptnBalu/Arduino_Spot_Welder_V2
Arduino controlled Spot Welder for battery welding
57 parts78GPL-3.0
2 layers100.3 × 142.2 mm
Power board
makerspacelt/fun-cart1Electric drift cart
- Size
- 100.3 × 142.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 68
- Nets
- 3
- Pads
- 188
- Tracks, vias
- 544, 0
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 28 Dec 2014
- Updated
- 23 Mar 2015
Overview
Power board is an open-source printed circuit board by makerspacelt, from the makerspacelt/fun-cart repository on GitHub, published under the BSD-2-Clause licence. It is a 2-layer board of 100.3 × 142.2 mm with 68 parts on 3 nets, routed with 544 tracks and 0 vias.
It is built around the IRFB7437PBF. Its parts include 20 capacitors, 20 transistors and 8 connectors.
Main components
1README
README.mdfun-cart
Electric drift cart
Parts
68| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 470u | C2V10 | C1, C2, C3, C4, C5, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 +4 |
| 20 | GS2 | bar_connector | GS1, GS2, GS3, GS4, GS5, GS10, GS11, GS12, GS13, GS14, GS15, GS16, GS17, GS18, GS19, GS20 +4 |
| 20 | IRFB7437PBF | TO220_GDS_VERT_POWER | Q1, Q2, Q3, Q4, Q5, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 +4 |
| 5 | MOUNT_HOLE | 1pin | P4, P5, P6, P7, P8 |
| 1 | B+ | bus_bar_battery | P1 |
| 1 | B- | bus_bar_battery | P3 |
| 1 | M- | bus_bar_motor | P2 |
Questions
How big is the Power board PCB?
It measures 100.3 × 142.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power board use?
68 parts, built around the IRFB7437PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power board KiCad files?
From the makerspacelt/fun-cart repository on GitHub, at the commit this page was made from: the board is esc_powerboard_kicad_project/power_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power board design in my own project?
Its repository publishes it under the BSD-2-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers94 × 98 mm
- 2 layers94 × 85 mm
VECTAR PSU REV2
OATS-SD-26/VECTAR-PSU-REV2
Revision 2 of the power supply unit (PSU) PCB for the VECTAR project.
67 parts - 2 layers110 × 90 mm
- 2 layers100 × 57 mm
- 2 layers243.6 × 104.8 mm
- 2 layers100 × 35 mm
ArduI2CKeyboard
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
68 parts282 - 2 layers58 × 65 mm
