2 layers49 × 48.9 mm
2 layers49 × 48.9 mm
a really easy, learn to solder Maker's Asylum Badge
- Size
- 49 × 48.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 11
- Pads
- 30
- Tracks, vias
- 43, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 May 2016
- Updated
- 20 Aug 2026
Overview
MAP4 is an open-source printed circuit board by MakersAsylumIndia, from the MakersAsylumIndia/MAP4 repository on GitHub. It is a 2-layer board of 49 × 48.9 mm with 15 parts on 11 nets, routed with 43 tracks and 0 vias.
Its parts include 7 connectors, 3 resistors and 3 diodes. It belongs with the lEDs and displays boards of this library.
README
README.mdMAP4
a really easy, "learn to solder" Maker's Asylum Badge consisting of three LED's and a battery
Maker's Asylum Project #4
FEATURES
- Three LED's with series current limit resistors
- One CR2032 Coin Battery
- Use either One, Two or Three LEDs.
- Use Red, Green and Blue LEDs, or all White LEDs or whatever you choose
- Use a Blinking LED
- Replace Resistor with LDR to have light controlled brightness
LEARN
- How to Solder
- Resistor Color Code
- Use of Multimeter to check LED, Resistor and Battery
DISCUSSION FORUM : http://discuss.makersasylum.com/t/map4-makers-asylum-learn-to-solder-badge/123
rev1 renders
rev5 renders
License
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Extra_Pad | map4_fp:MTG_0mm8 | P3, P4, P5, P6 |
| 3 | 10E | map4_fp:r_0805 | R1, R2, R3 |
| 1 | BATT_HOLDER | map4_fp:cr2032_02 | BT1 |
| 1 | Blu | map4_fp:LED-5MM_INV | D3 |
| 1 | Fixing_Pin | map4_fp:MTG_3mmx1mm2 | P2 |
| 1 | Grn | map4_fp:LED-5MM | D2 |
| 1 | Logo_MA | map4_fp:MA_LOGO4 | P1 |
| 1 | OPEN_HARDWARE_1 | map4_fp:Logo_silk_OSHW_6x6mm | LOGO1 |
| 1 | Red | map4_fp:LED-5MM | D1 |
| 1 | SW | map4_fp:PinHeader_1x03_P2.54mm_Vertical | J1 |
Questions
How big is the MAP4 PCB?
It measures 49 × 48.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MAP4 use?
15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAP4 KiCad files?
From the MakersAsylumIndia/MAP4 repository on GitHub, at the commit this page was made from: the board is kicad/map4_v9/MAP4.kicad_pcb and its schematic kicad/archive/map4_v7/MAP4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAP4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask MakersAsylumIndia before reusing the design.
More from MakersAsylumIndia/MAP4
2- 2 layers49 × 48.9 mm
Similar boards
- 2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915 - 2 layers24.3 × 57.9 mm
Flosspods pro flex
kenp-io/not-for-airpods-repairs
The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.
15 parts609WTFPL - 2 layers20.3 × 15.2 mm
L0 Load
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
15 parts546MIT - 2 layers68 × 50 mm
EleLab v2 PowerFeed
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
15 parts531GPL-3.0 - 2 layers50.8 × 35.6 mm
