2 layers49 × 48.9 mm
2 layers49 × 48.9 mm
a really easy, learn to solder Maker's Asylum Badge
- Size
- 49 × 48.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 5
- Pads
- 27
- Tracks, vias
- 64, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 24 May 2016
- Updated
- 20 Aug 2026
Overview
MAP4 is an open-source printed circuit board by MakersAsylumIndia, from the MakersAsylumIndia/MAP4 repository on GitHub. It is a 2-layer board of 49 × 48.9 mm with 14 parts on 5 nets, routed with 64 tracks and 0 vias.
Its parts include 6 connectors, 3 resistors and 3 diodes. It belongs with the lEDs and displays boards of this library.
README
README.mdMAP4
a really easy, "learn to solder" Maker's Asylum Badge consisting of three LED's and a battery
Maker's Asylum Project #4
FEATURES
- Three LED's with series current limit resistors
- One CR2032 Coin Battery
- Use either One, Two or Three LEDs.
- Use Red, Green and Blue LEDs, or all White LEDs or whatever you choose
- Use a Blinking LED
- Replace Resistor with LDR to have light controlled brightness
LEARN
- How to Solder
- Resistor Color Code
- Use of Multimeter to check LED, Resistor and Battery
DISCUSSION FORUM : http://discuss.makersasylum.com/t/map4-makers-asylum-learn-to-solder-badge/123
rev1 renders
rev5 renders
License
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Pin | map4_fp:MTG_0mm8 | P3, P4, P5, P6 |
| 3 | 10E | map4_fp:r_0805 | R1, R2, R3 |
| 1 | BATT_HOLDER | map4_fp:cr2032_02 | BT1 |
| 1 | Blu | map4_fp:LED-5MM | D3 |
| 1 | Grn | map4_fp:LED-5MM | D2 |
| 1 | LOGO | map4_fp:MA_LOGO4 | P1 |
| 1 | OPEN_HARDWARE_1 | map4_fp:Logo_silk_OSHW_6x6mm | LOGO1 |
| 1 | Pin | map4_fp:MTG_3mm | P2 |
| 1 | Red | map4_fp:LED-5MM | D1 |
Questions
How big is the MAP4 PCB?
It measures 49 × 48.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MAP4 use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAP4 KiCad files?
From the MakersAsylumIndia/MAP4 repository on GitHub, at the commit this page was made from: the board is kicad/archive/map4_v8/MAP4.kicad_pcb and its schematic kicad/archive/map4_v7/MAP4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAP4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask MakersAsylumIndia before reusing the design.
More from MakersAsylumIndia/MAP4
2- 2 layers49 × 48.9 mm
Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
