2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers26 × 17 mm
Learn a lot : "Schematic+PCB design, Enclosure design, PCB Production, Learn to Solder, 3D Printing"
- Size
- 26 × 17 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 7
- Pads
- 20
- Tracks, vias
- 32, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Apr 2016
- Updated
- 18 Apr 2016
Overview
MAP3 is an open-source printed circuit board by MakersAsylumIndia, from the MakersAsylumIndia/MAP3 repository on GitHub. It is a 2-layer board of 26 × 17 mm with 7 parts on 7 nets, routed with 32 tracks and 0 vias.
Its parts include 4 diodes and 2 resistors.
README
README.mdMAP3
Maker's Asylum Project #3
Learn a lot project
FEATURES
- A handy Torch with 4 (or 3) White LED's powered by a 9V battery.
- Includes one fixed current limiting resistor.
- Includes a secondary variable trimpot (potentiometer) to allow dimming.
LEARN
- Learn PCB design using KiCad
- Learn Enclosure design using FreeCAD
- Learn PCB Production (using Laser Cutter exposing and Ferric Chloride etching) and Manual Drilling
- Learn to Solder
- Learn 3D Printing
DISCUSSION FORUM : TBD
Through Hole Version
Inspired by the PT-3000 Personal Torch as shown on Adafruit at https://learn.adafruit.com/pt3000-personal-torch/
License
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | LED | map3_fp:LED-5MM | D1, D2, D3, D4 |
| 1 | 100E | map3_fp:Resistor_Horizontal_RM10mm | R2 |
| 1 | 100E | map3_fp:Potentiometer_Bourns_3296Y_3-8Zoll_Angular_ScrewUp | R1 |
| 1 | BATT_HOLDER | map3_fp:9V_clip_968 | BT1 |
Questions
How big is the MAP3 PCB?
It measures 26 × 17 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MAP3 use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MAP3 KiCad files?
From the MakersAsylumIndia/MAP3 repository on GitHub, at the commit this page was made from: the board is kicad/MAP3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MAP3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask MakersAsylumIndia before reusing the design.
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
