4 layers
BigBoi
NedreAkerselvSkapervOgAkadmikerforening/Nebula
Nebula er foreningen NASAs neste generasjons flydatamaskin til bruk i foreningens modellrakketter.
100 parts
6 layers8 × 10 mm
PicoM10 bld bak
makerprobe/PicoM101A pretty small ublox MIA-M10Q based GNSS module
- Size
- 8 × 10 mm
- Copper layers
- 6
- Thickness
- 0.8 mm
- Parts
- 25
- Nets
- 31
- Pads
- 109
- Tracks, vias
- 61, 40
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Nov 2024
- Updated
- 21 May 2025
Overview
PicoM10 bld bak is an open-source printed circuit board by makerprobe, from the makerprobe/PicoM10 repository on GitHub, published under the MIT licence. It is a 6-layer board of 8 × 10 mm with 25 parts on 31 nets, routed with 61 tracks and 40 vias.
It is built around the MIA-M10Q, PESD3V3Z1BSF and CONMHF1-SMD-G-T. Its parts include 9 capacitors, 6 diodes, 2 resistors, 2 ICs and 1 connector.
Main components
3
MIA-M10Q
LGA-53LGA-53 New Arrivals ROHSu-bloxUncategorised
PESD3V3Z1BSF
DSF0603-2-40℃~+125℃ 0.28pF 1 1nA 3.3V 5.3V 6.9V 9.5A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DSF0603-2 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
CONMHF1-SMD-G-T
SMD-40℃~+90℃ 1 50Ω 60V 6GHz Board Side Male Pin SMD Coaxial Connectors (RF) ROHSTE ConnectivityCoaxial Connectors (RF)
README
README.mdPicoM10
A pretty small ublox MIA-M10Q based GNSS module
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 4 | PESD3V3Z1BSF | Diode_SMD:Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm | D3, D4, D5, D6 |
| 3 | TBD | PicoM10:C_0201_0603Metric_mod | C7, L1, L2 |
| 2 | 1k | PicoM10:R_0201_0603Metric_mod | R1, R2 |
| 1 | 100uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C6 |
| 1 | Conn_Coaxial | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_SOD-923 | D1 |
| 1 | Gnd | PicoM10:solderpad_castellated_2x2mm | TP2 |
| 1 | LED | PicoM10:LED_0201_0603Metric_mod | D2 |
| 1 | MIA-M10Q | PicoM10:SLGA-53_MIA-M10Q | U1 |
| 1 | NCP160AMX330TBG | Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm | U2 |
| 1 | Rx_in | PicoM10:solderpad_castellated_2x2mm | TP4 |
| 1 | Safeboot | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | Tx_out | PicoM10:solderpad_castellated_2x2mm | TP3 |
| 1 | Vin | PicoM10:solderpad_castellated_2x2mm | TP1 |
Questions
How big is the PicoM10 bld bak PCB?
It measures 8 × 10 mm and has 6 copper layers, 0.8 mm thick.
What parts does the PicoM10 bld bak use?
25 parts, built around the MIA-M10Q, PESD3V3Z1BSF and CONMHF1-SMD-G-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PicoM10 bld bak KiCad files?
From the makerprobe/PicoM10 repository on GitHub, at the commit this page was made from: the board is kicad/PicoM10_bld_bak.kicad_pcb and its schematic kicad/PicoM10_bld.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PicoM10 bld bak design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 6 layers48 × 40 mm
- 4 layers23 × 18 mm
- 6 layers84 × 50 mm
Solar ribbit
Ribbit-Network/ribbit-network-frog-hardware
The sensor for the world's largest crowdsourced network of open-source, low-cost, GHG Gas Detection Sensors.
171 parts107MIT - 4 layers175.8 × 65.1 mm
Bachelor Main PCB
fiskebolle30/Bachelor_Electronics_hardware
All PCB design files for the bachelor project. Project is made in KiCad
231 parts1 - 2 layers23 × 15 mm
- 4 layers95.3 × 62 mm
Processing board
N-Pulse/EMG-HW-MainBoard
This repository contains the PCB design of the EMG bracelet's main board used for EMG signal processing and decoding. Detailed description of the project can be found in the Documentation folder
135 partsCC-BY-4.0 - 6 layers137.4 × 81.3 mm
