
Tinylab proto1
espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

my promicro version of the _33 keyboard
Lodash33 is an open-source printed circuit board by makenova, from the makenova/lodash33 repository on GitHub, published under the MIT licence. It is a 2-layer board of 187.7 × 73.8 mm with 79 parts on 58 nets, routed with 366 tracks and 28 vias.
Its parts include 36 diodes, 2 connectors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

A promicro version of the _33 keyboard. There are produciton files in the "gerbers" directory for the pcb and a skeleton case. Simply upload the zip files to your PCB manufacturer of choice.
You'll also need
There are at least two possible layouts

Starting firmware can be found on my QMK fork in the makenova branch.
Here is what a built version can look like:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | D_Small | Keebio-Parts:Diode-Hybrid-Back | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 33 | MX-NoLED | MX_Only:MXOnly-1U-NoLED | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22, MX23 +17 |
| 3 | MX-NoLED | MX_Only:MXOnly-1.25U-NoLED | MX32, MX35, MX37 |
| 2 | Conn_01x02_Female | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J1, J2 |
| 1 | Jumper_NO_Small | random-keyboard-parts:Jumper-UserFriendly-Small | JP1 |
| 1 | MX-NoLED | MX_Only:MXOnly-2.25U-ReversedStabilizers-NoLED | MX33 |
| 1 | MX-NoLED | MX_Only:MXOnly-6.25U-ReversedStabilizers-NoLED | MX38 |
| 1 | MX-NoLED | MX_Only:MXOnly-2U-ReversedStabilizers-NoLED | MX34 |
| 1 | ProMicro | Keebio-Parts:ArduinoProMicro-ZigZag | U1 |

espotek-org/Labrador
EspoTek Labrador is a USB device that transforms your PC or smartphone into a fully-featured electronics lab. This repo holds all of the source code!

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.

strayer/taira-keyboard
A wireless low-profile split mechanical keyboard with 66 keys inspired by the ErgoDash and Corne Chocolate



cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.

It measures 187.7 × 73.8 mm and has 2 copper layers, 1.6 mm thick.
79 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the makenova/lodash33 repository on GitHub, at the commit this page was made from: the board is 33.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).