2 layers391 × 129.9 mm
2 layers284.7 × 112.2 mm
Eclipse60
MaiTheSan/PCB-DesignAll PCB Projects of SawnsProjects & Salane
- Size
- 284.7 × 112.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 203
- Nets
- 121
- Pads
- 1,262
- Tracks, vias
- 1,057, 76
- Pours
- 809
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Nov 2022
- Updated
- 31 Dec 2022
Overview
Eclipse60 is an open-source printed circuit board by MaiTheSan, from the MaiTheSan/PCB-Design repository on GitHub. It is a 2-layer board of 284.7 × 112.2 mm with 203 parts on 121 nets, routed with 1,057 tracks and 76 vias.
It is built around the ATMEGA32U4-MU, 1N4148W and WS2812B. Its parts include 65 diodes, 5 capacitors, 5 resistors, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
Parts
203| Qty | Value | Footprint | References |
|---|---|---|---|
| 65 | 1N4148W | sanproject-keyboard-part:DIODE_1206_SawnsProjects | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +49 |
| 59 | 1U | MX_Solder_SawnsProjects:MXOnly-1U-NoLED | MX1, MX2, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX18, MX19, MX20, MX21, MX22, MX23, MX24 +43 |
| 18 | WS2812B | sanproject-keyboard-part:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB10, RGB11, RGB12, RGB13, RGB14, RGB15, RGB16, RGB17, RGB18 +2 |
| 10 | VAL** | sanproject-keyboard-part:mouse-bite-3mm-1slot | mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot, mouse-bite-3mm-slot |
| 9 | 1.25U | MX_Solder_SawnsProjects:MXOnly-1.25U-NoLED | MX49, MX64, MX65, MX66, MX67, MX68, MX69, MX71, MX74 |
| 6 | 1.5U | MX_Solder_SawnsProjects:MXOnly-1.5U-NoLED | MX17, MX30, MX61, MX78, MX80, MX81 |
| 3 | 0.1uF | sanproject-keyboard-part:C_0603 | C3, C4, C5 |
| 3 | 1.75U | MX_Solder_SawnsProjects:MXOnly-1.75U-NoLED | MX33, MX47, MX62 |
| 2 | 10k | sanproject-keyboard-part:R_0603 | R1, R4 |
| 2 | 22R | sanproject-keyboard-part:R_0603 | R2, R3 |
| 2 | Daughterboard | sanproject-keyboard-part:JST-SR-4 | J1, J2 |
| 1 | 10uF | sanproject-keyboard-part:C_0603 | C2 |
| 1 | 16MHz | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | 1U | MX_Solder_SawnsProjects:MXOnly-2U-NoLED | MX46 |
| 1 | 1uF | sanproject-keyboard-part:C_0603 | C1 |
| 1 | 2.25U | MX_Solder_SawnsProjects:MXOnly-2.25U-ReversedStabilizers-NoLED | MX45 |
| 1 | 2.25U | MX_Solder_SawnsProjects:MXOnly-2.25U-NoLED | MX31 |
| 1 | 2.75U | MX_Solder_SawnsProjects:MXOnly-2.75U-NoLED | MX76 |
| 1 | 300R | sanproject-keyboard-part:R_0603 | R5 |
| 1 | 6.25U | MX_Solder_SawnsProjects:MXOnly-6.25U-ReversedStabilizers-NoLED | MX70 |
| 1 | 7U | MX_Solder_SawnsProjects:MXOnly-7U-ReversedStabilizers-NoLED | MX79 |
| 1 | ATmega32U4-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias | U1 |
| 1 | ISO | MX_Solder_SawnsProjects:MXOnly-ISO-ROTATED-ReversedStabilizers-NoLED | MX84 |
| 1 | LOGO | logo:CatEF.Cu | b |
| 1 | LOGO | logo:CatEMask | a |
| 1 | LOGO | logo:wattermaskSawns | G*** |
| 1 | LOGO | logo:TinynekoMask | G*** |
| 1 | LOGO | logo:Tinyneko | G*** |
| 1 | LOGO | logo:CatE | c |
| 1 | LOGO | logo:SalaneReboot | G*** |
| 1 | SW_Push | sanproject-keyboard-part:SKQG-1155865-fix | SW1 |
The 199 most common of 203 parts.
Questions
How big is the Eclipse60 PCB?
It measures 284.7 × 112.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Eclipse60 use?
203 parts, built around the ATMEGA32U4-MU, 1N4148W and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eclipse60 KiCad files?
From the MaiTheSan/PCB-Design repository on GitHub, at the commit this page was made from: the board is KiCad/Myprojects/Eclipse/Atmega32U4/CatE/Eclipse60.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eclipse60 design in my own project?
Its repository states no licence, so its author keeps all rights: ask MaiTheSan before reusing the design.
More from MaiTheSan/PCB-Design
12- 2 layers404.1 × 131.6 mm
- 2 layers116 × 90.5 mm
- 2 layers388.5 × 131.3 mm
- 2 layers389.7 × 131.6 mm
- 2 layers422.2 × 117.9 mm
- 2 layers389.7 × 131.6 mm
- 2 layers347.6 × 129.8 mm
- 2 layers
- 2 layers
- 2 layers382 × 160 mm
- 2 layers344 × 123.6 mm
Similar boards
- 2 layers284.7 × 95.5 mm
- 2 layers185.7 × 119.1 mm
- 2 layers76.2 × 118.3 mm
- 2 layers78.7 × 97.3 mm
- 2 layers438.2 × 133.4 mm
NaturalKeyboard
cyberknet/NaturalKeyboard
Custom Mechanical Keyboard PCB that will eventually have a Natural/Ergonomic layout
235 partsMIT - 2 layers79 × 117.5 mm
- 2 layers437.9 × 148.2 mm
- 2 layers303.8 × 93.5 mm
Draytronics Elise PCB V2
ghostseven/Draytronics-Elise-PCB-V2
(Current V2) An open source 65% mechanical keyboard, designed to be physically compatible with XD68
197 parts9