2 layers404.1 × 131.6 mm
2 layers391 × 129.9 mm
Parallel
MaiTheSan/PCB-DesignAll PCB Projects of SawnsProjects & Salane
- Size
- 391 × 129.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 522
- Nets
- 283
- Pads
- 1,537
- Tracks, vias
- 2,121, 214
- Pours
- 908
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Nov 2022
- Updated
- 31 Dec 2022
Overview
Parallel is an open-source printed circuit board by MaiTheSan, from the MaiTheSan/PCB-Design repository on GitHub. It is a 2-layer board of 391 × 129.9 mm with 522 parts on 283 nets, routed with 2,121 tracks and 214 vias.
It is built around the STM32F303CCT6, PRTR5V0U2X and WS2812B, with the SK6805E-J and DTC123JE among its other parts. Its parts include 222 diodes, 118 resistors, 33 capacitors, 3 ICs and 2 transistors. It belongs with the STM32 boards of this library.
Main components
5
STM32F303CCT6
LQFP-48(7x7)-40℃~+85℃ 12bit 12bit 256KB 2V~3.6V 32 Bit 37 40KB 72MHz ARM Cortex-M4 Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
SK6805E-J
SMD,5.4x5mm-40℃~+85℃ 0.5mA 1.6mm 100mcd~200mcd 100ns 120° 1kHz 2000V 3.7V~5.5V 385mcd~697.5mcd 460nm~470nm 5.4mm 50ns 520nm~535nm 5mm 620nm~625nm 800Kbit/s 80mcd~160mcd 80ns Built-in power-on reset circuit Semi-transparent lens SMD,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
DTC123JE
SOT-523-55℃~+150℃ 1 NPN (Pre-Biased) 1.1V 100mA 150mW 2.2kΩ 250MHz 26 300mV 300mV 500mV@100uA,5V 50V 80 NPN SOT-523 Digital Transistors ROHSHXY MOSFETDigital Transistors
Parts
522| Qty | Value | Footprint | References |
|---|---|---|---|
| 106 | D | sanproject-keyboard-part:D_SOD-123 | D149, D150, D151, D152, D153, D154, D155, D156, D157, D158, D159, D160, D161, D162, D163, D164 +90 |
| 104 | 330R | sanproject-keyboard-part:C_0603 | R10, R11, R12, R13, R14, R15, R16, R100, R101, R102, R103, R104, R105, R106, R111, R112 +88 |
| 95 | LED | MX_Only_v3:MXOnly-LEDONLY | D1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D113, D114 +79 |
| 92 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-1U-NoLED | MX1, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX101, MX102, MX103, MX104, MX105 +76 |
| 20 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26 +4 |
| 20 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGB1, RGB2, RGB3, RGB4, RGB5, RGB10, RGB11, RGB12, RGB13, RGB14, RGB15, RGB16, RGB17, RGB18, RGB19, RGB20 +4 |
| 18 | LED | MX_Only_v3:MXOnly-LEDONLY-FLIPPED | D38, D111, D112, D116, D117, D118, D130, D132, D134, D145, D183, D194, D198, D214, D218, D224 +2 |
| 6 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-1.5U-NoLED | MX39, MX99, MX107, MX108, MX110, MX111 |
| 5 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-1.25U-NoLED | MX97, MX98, MX112, MX113, MX114 |
| 4 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7, C9 |
| 3 | 10k | sanproject-keyboard-part:R_0805 | R2, R115, R116 |
| 3 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-2U-NoLED | MX57, MX94, MX96 |
| 3 | SK6805 | LED_SMD:LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D199, D200, D201 |
| 2 | 0.01uF | Capacitor_SMD:C_0402_1005Metric | C32, C33 |
| 2 | 100k | sanproject-keyboard-part:R_0805 | R3, R4 |
| 2 | 1uF | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I | C11, C12 |
| 2 | 22 | sanproject-keyboard-part:R_0805 | R109, R110 |
| 2 | 5.1k | sanproject-keyboard-part:R_0805 | R107, R108 |
| 2 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-1.75U-NoLED | MX58, MX83 |
| 2 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-2.25U-NoLED | MX59, MX100 |
| 1 | 1.5k | sanproject-keyboard-part:R_0805 | R118 |
| 1 | 100R | sanproject-keyboard-part:R_0805 | R114 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10uF (±5%) | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 1206 @ 500mA | sanproject-keyboard-part:Fuse_SMD1206_Reflow | F1 |
| 1 | 1M (±1%) | sanproject-keyboard-part:R_0805 | R1 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 200-500R | sanproject-keyboard-part:R_0805 | R113 |
| 1 | 2N7002 | SI2308 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 330k (±1%) | sanproject-keyboard-part:R_0805 | R117 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | DTC123J | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | HRO-TYPE-C-31-M-12 | sanproject-keyboard-part:HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | LOGO | CustomLogo:parallel | G*** |
| 1 | LOGO | MX_Only_v3:sanpjxlogo | G*** |
| 1 | LOGO | CustomLogo:Nuxroslogo25x19-F.Cu | G*** |
| 1 | LOGO | CustomLogo:CreKrush | G*** |
| 1 | MCP1700-3302E / MCP1703A-3302 (SOT23) | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-6.25U-ReversedStabilizers-NoLED | MX115 |
| 1 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-ISO-ROTATED-ReversedStabilizers-NoLED | MX82 |
| 1 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-7U-ReversedStabilizers-NoLED | MX109 |
| 1 | MX-NoLED-MX_Alps_Hybrid | MX_Only_v3:MXOnly-2U-ReversedStabilizers-NoLED | MX106 |
| 1 | PRTR5V0U2X | sanproject-keyboard-part:SOT143B | U5 |
| 1 | Resonator 8Mhz | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y2 |
| 1 | Rotary_Encoder_Switch | sanproject-keyboard-part:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_Center | SW3 |
| 1 | STM32F303CCT6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | sanproject-keyboard-part:SKQG-1155865 | SW1 |
Questions
How big is the Parallel PCB?
It measures 391 × 129.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Parallel use?
522 parts, built around the STM32F303CCT6, PRTR5V0U2X, WS2812B and SK6805E-J. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Parallel KiCad files?
From the MaiTheSan/PCB-Design repository on GitHub, at the commit this page was made from: the board is KiCad/07-2021/Parallel/Parallel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Parallel design in my own project?
Its repository states no licence, so its author keeps all rights: ask MaiTheSan before reusing the design.
More from MaiTheSan/PCB-Design
12- 2 layers116 × 90.5 mm
- 2 layers388.5 × 131.3 mm
- 2 layers389.7 × 131.6 mm
- 2 layers422.2 × 117.9 mm
- 2 layers389.7 × 131.6 mm
- 2 layers347.6 × 129.8 mm
- 2 layers
- 2 layers
- 2 layers382 × 160 mm
- 2 layers344 × 123.6 mm
- 2 layers344 × 124 mm
Similar boards
- 2 layers325.5 × 240.1 mm
- 2 layers266.7 × 77 mm
KB Lightbar 1 straight
melonbred/open-source-projects
This is a repository for all open-sourced or available files for my projects. PCBs will typically have their own repository linked in the table below.
146 parts16MIT - 2 layers303.2 × 98.7 mm
- 2 layers390 × 120.2 mm
- 2 layers89 × 124 mm
Hub20
joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.
183 parts68 - 2 layers283 × 94.2 mm
Tsuki
AcheronProject/Tsuki
60% keyboard PCB featuring a wide array of layouts powered by STM32F072
387 parts35 - 2 layers429.6 × 540.7 mm
Keyboard
joshajohnson/louise
A project between Josh and RiotPunch to build a 75% alice keyboard with a southpaw numpad.
327 parts5 - 2 layers389.5 × 155.3 mm
