

All PCB Projects of SawnsProjects & Salane
- Size
- 309.6 × 119.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 211
- Nets
- 134
- Pads
- 1,563
- Tracks, vias
- 1,499, 128
- Pours
- 453
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Nov 2022
- Updated
- 31 Dec 2022
Overview
75F is an open-source printed circuit board by MaiTheSan, from the MaiTheSan/PCB-Design repository on GitHub. It is a 2-layer board of 309.6 × 119.1 mm with 211 parts on 134 nets, routed with 1,499 tracks and 128 vias.
It is built around the ATMEGA32U4-MU, PRTR5V0U2X and 1N4148W, with the WS2812B and CSTCE16M0V53-R0 among its other parts. Its parts include 84 diodes, 7 capacitors, 6 resistors, 2 ICs and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA32U4-MU
VQFN-44-EP(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.5KB 2.7V~5.5V 26 32KB 8 Bit AVR Built-in FLASH VQFN-44-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)PRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorisedCSTCE16M0V53-R0
SMD3213-3P-20℃~+80℃ 15pF 16MHz 40Ω SMD3213-3P Ceramic Resonators ROHSMurataCeramic Resonators
Parts
211| Qty | Value | Footprint | References |
|---|---|---|---|
| 84 | 1n4148w | sanproject-keyboard-part:DIODE_1206_SawnsProjects | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +68 |
| 68 | Hotswap | MX_Only_v4:MXOnly-1U-Hotswap-Sawns | MX1, MX2, MX12, MX13, MX14, MX15, MX16, MX18, MX19, MX20, MX21, MX22, MX24, MX25, MX26, MX27 +52 |
| 15 | WS2812B | sanproject-keyboard-part:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | RGB1, RGB2, RGB3, RGB4, RGB5, RGB6, RGB7, RGB8, RGB9, RGB10, RGB11, RGB12, RGB13, RGB15, RGB16 |
| 8 | Hotswap | MX_Only_v4:MXOnly-1.25U-Hotswap-Sawns | MX11, MX17, MX23, MX66, MX71, MX75, MX81, MX83 |
| 6 | Hotswap | MX_Only_v4:MXOnly-1.5U-Hotswap-Sawns | MX8, MX78, MX86, MX88, MX89, MX91 |
| 5 | 0.1uF | sanproject-keyboard-part:C_0603 | C4, C5, C7, C8, C9 |
| 3 | 10k | sanproject-keyboard-part:R_0805 | R1, R2, R5 |
| 2 | 22 | sanproject-keyboard-part:R_0805 | R3, R4 |
| 2 | Hotswap | MX_Only_v4:MXOnly-2.25U-Hotswap-Sawns | MX10, MX82 |
| 2 | Hotswap | MX_Only_v4:MXOnly-1.75U-Hotswap-Sawns | MX9, MX85 |
| 1 | 10uF | sanproject-keyboard-part:C_0603 | C1 |
| 1 | 1k | sanproject-keyboard-part:R_0805 | R6 |
| 1 | 1uF | sanproject-keyboard-part:C_0603 | C6 |
| 1 | ATmega32U4-MU | Package_DFN_QFN:QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U2 |
| 1 | CSTCE16M0V53-R0 | Crystal:Resonator_SMD_muRata_CSTxExxV-3Pin_3.0x1.1mm | Y1 |
| 1 | Conn_01x04_Female | sanproject-keyboard-part:JST-SR-4 | J1 |
| 1 | Hotswap | MX_Only_v4:MXOnly-6.25U-Hotswap-ReversedStabilizers-Sawns | MX40 |
| 1 | Hotswap | MX_Only_v4:MXOnly-2.75U-Hotswap-ReversedStabilizers-Sawns | MX34 |
| 1 | Hotswap | MX_Only_v4:MXOnly-2U-Hotswap-Sawns | MX77 |
| 1 | Hotswap | MX_Only_v4:MXOnly-2.25U-Hotswap-ReversedStabilizers-Sawns | MX79 |
| 1 | Hotswap | MX_Only_v4:MXOnly-7U-Hotswap-Sawns | MX92 |
| 1 | PRTR5V0U2X | sanproject-keyboard-part:SOT143B | U1 |
| 1 | Rotary_Encoder_Switch | sanproject-keyboard-part:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_Center | SW2 |
| 1 | STF202-22T1G | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | ISP1 |
| 1 | SW_Push | sanproject-keyboard-part:SKQG-1155865 | SW1 |
| 1 | WS2812B | sanproject-keyboard-part:RGB-6028_FLIPPED | RGB14 |
More from MaiTheSan/PCB-Design
12- 2 layers391 × 129.9 mm

- 2 layers404.1 × 131.6 mm

- 2 layers116 × 90.5 mm

- 2 layers388.5 × 131.3 mm

- 2 layers389.7 × 131.6 mm
%20-%20Copy/1800%20source/1800%20layout.kicad_pcb.jpg?size=s&soon)
- 2 layers422.2 × 117.9 mm

- 2 layers389.7 × 131.6 mm

- 2 layers347.6 × 129.8 mm

- 2 layers

- 2 layers

- 2 layers382 × 160 mm

- 2 layers344 × 123.6 mm

Similar boards
- 2 layers79 × 117.5 mm

- 2 layers228.4 × 85 mm

LeChiffre
paindrivendev/le-yiffre
Le Yiffre is a modified hotswap Le Chiffre pcb as an experimental design with different thumb clusters.Thanks to tominabox1 for creating Le Chiffre Keyboard and making it open source.
108 parts8 - 2 layers285 × 95.1 mm

Voyager60
staticintlucas/Voyager60-SMK
A fork of ai03's Voyager60-Alps, adapted for SMK 2nd gen switches
198 parts2MIT - 2 layers343.8 × 98.1 mm

- 2 layers68.3 × 31.8 mm

- 2 layers114.3 × 20.6 mm

- 2 layers337.2 × 123.2 mm

- 2 layers336.6 × 121.7 mm

Questions
How big is the 75F PCB?
It measures 309.6 × 119.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 75F use?
211 parts, built around the ATMEGA32U4-MU, PRTR5V0U2X, 1N4148W and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 75F KiCad files?
From the MaiTheSan/PCB-Design repository on GitHub, at the commit this page was made from: the board is KiCad/3-2022/75F/75F/75F/75F.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 75F design in my own project?
Its repository states no licence, so its author keeps all rights: ask MaiTheSan before reusing the design.