Skip to the content
2 layers139.3 × 107.4 mmSplitboard, the printed circuit board in 3D

A custom, completely from scratch built wireless corne split keyboard with 42 hotswappable Switches, and 2 OLED's. Everything from PCB to Case was built by me, and i handpicked all the components.

Size
139.3 × 107.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
48
Pads
344
Tracks, vias
538, 108
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Jun 2026
Updated
6 Sep 2026

Overview

Splitboard is an open-source printed circuit board by mail2adnanyazik-bit, from the mail2adnanyazik-bit/Pandakeeb repository on GitHub. It is a 2-layer board of 139.3 × 107.4 mm with 55 parts on 48 nets, routed with 538 tracks and 108 vias.

Its parts include 21 diodes, 21 switches, 4 resistors and 1 IC. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

README.md

Splitboard - a custom, built from scratch wireless corne split keyboard. Built for Stardance, to qualify for Outpost.

Splitboard is a wireless split keyboard built by ME - Panda (also known as Adnan)

You see, my dad has had a dygma raise split keyboard since like 4 years, and i thought it looked REALLY cool, and wanted to get one - till i saw the price - the thing was whopping 200 DOLLARS ! So i thought to myself - why not build one myself ?

By the time this event rolled around, i was already getting tired of my very *anti-*ergonomic apple magic keyboard, and thought that this project would be perfect, expecially cause of the experience with keyboards i got from the Hackpad mission.

That is how the Splitboard was born.

Components :

Since this keyboard was made completely from scratch, i first will tell you whats its made of :

The Split Keyboard has 2 halves, with each having :

  • 21 Keys (3x6 matrix with 3 thumb keys) - in the classic Corne layout
  • One OLED (blue, since thats myt fav color)
  • A supermini nrf52840 microcontroller - this is a cheap nice ! nano v2 clone, a wireless chip made excpecially with keyboards in mind
  • A 110 mAh Battery (should last weeks with my setup)

So this is the Schematic with all mentioned components :

Schematic :

As you can see, i dont like wires :D

PCB :

left side :

right side :

Although the initial plan was to make a reversible PCB that i would just turn 180 degrees, i decided to make my keyboard not symmetric - which means i cant just turn it around, instead i have to make two seperate PCB's

Case :

You can view it interactively on OnShape in your Browser ! : https://cad.onshape.com/documents/4401902cdc607732e38adc1c/w/b44e538c7538a5811b6e646c/e/3efcd232ff04d945eef59e16?renderMode=0&uiState=6a440a2cf26d36c1903a4b4f

For the case, i decided to use just two parts :

  • A Case Bottom :

    This just holds the PCB and components for my keyboard

  • A Top Plate :

    This will be screwed on to the base, and has holes for the components that need to look out to poke out

Assembly :

There will be a such Bottom and Top for both halves of the keyboard, and it will then be assembled like this :

Then Keycaps will be pressed on to the switches.

This will be done on both sides :

In the end it will look like this :

Firmware :

Because i had to make the firmware extremely fast for outpost, im just making a completely boring, standard corne keyboard firmware with ZMK

Costs (BOM) :

I will buy everything except PCB from Aliexpress

2x supermini nrf52840 : 15 $ 2x 110 mAh LiPo battery : 5 $ 1N4148 SMD Diodes : 2 $ Kailh MX Hotswap sockets : ~ 7 $ 42 x Cherry MX Switches : ~ 40 $ 42 x Cherry MX Keycaps : 25 $ 2 x 0.91" OLED Display : 6$ 4.7kΩ SMD resistors : 1 $ 100kΩ SMD resistors : 1$ SPST slide switches : 0.50 $ JST PH 2.0 2-pin connector (for battery) : 1 $ M2 standoffs + screws kit : 2 $ 8mm self-adhesive bumpons (less glide) : 2 $ PCB from JLCPCB : 20 $ Shipping (Aliexpress and JLCPCB) : 15 $

==IMPORTANT== : This BOM is NOT accurate ! Check the actual BOM.csv file in the main branch

Total : ~ 115$

I would add another 15 - 20 dollar buffer since something is bound to go wrong, so in the end it would be around 160 dollars.

Parts

55
QtyValueFootprintReferences
21DDiode_SMD:D_SOD-123D1, D2, D3, D4, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21 +5
21SW_Pushfootprints:Kailh_socket_MX_reversibleSW1, SW2, SW3, SW4, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21 +5
2100kResistor_SMD:R_0603_1608MetricR1, R2
24.7kResistor_SMD:R_0603_1608MetricR3, R4
1B+TestPoint:TestPoint_Pad_1.5x1.5mmB+1
1B-TestPoint:TestPoint_Pad_1.5x1.5mmB-1
1Conn_01x04_Pinfootprints:SSD1306-0.91-OLED-4pin-128x32OLED1
1SW_SPSTButton_Switch_SMD:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W8.61mm_P2.54mmSW-B1
1SuperMini nRF52840footprints:superminiU1

The 51 most common of 55 parts.

Similar boards

  • 2 layers229.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    55 parts2.1k
  • 2 layers370 × 11 mmDaylight Disco XXL, the printed circuit board in 3D

    Daylight Disco XXL

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    55 parts1.1kGPL-3.0
  • 2 layers370 × 10 mmE3NGLEDstick, the printed circuit board in 3D

    E3NGLEDstick

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    55 parts915
  • 2 layers139.3 × 94.8 mmFlake, the printed circuit board in 3D

    Flake

    lever-tech/flake

    An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]

    55 parts531CERN-OHL-W-2.0
  • 2 layers237.5 × 102.9 mmMemory, the printed circuit board in 3D

    Memory

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    55 parts301Unlicense
  • 2 layers60.6 × 24.1 mmBlep hackerboard, the printed circuit board in 3D

    Blep hackerboard

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    55 parts253GPL-3.0
  • 2 layers100 × 96.5 mmKeyboard ch552-36-lhs, the printed circuit board in 3D

    Keyboard ch552-36-lhs

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    55 parts236
  • 2 layers190.5 × 85.7 mmDissatisfaction30, the printed circuit board in 3D

    Dissatisfaction30

    dcpedit/dissatisfaction30

    To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).

    55 parts147CC-BY-4.0

Questions

How big is the Splitboard PCB?

It measures 139.3 × 107.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Splitboard use?

55 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Splitboard KiCad files?

From the mail2adnanyazik-bit/Pandakeeb repository on GitHub, at the commit this page was made from: the board is PCB/left/Splitboard.kicad_pcb and its schematic PCB/left/Splitboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Splitboard design in my own project?

Its repository states no licence, so its author keeps all rights: ask mail2adnanyazik-bit before reusing the design.