Skip to the content
2 layersAzaltma, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
41
Pads
93
Tracks, vias
108, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
30 Nov 2024
Updated
30 Nov 2024

Parts

19
QtyValueFootprintReferences
6RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6
3CCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC2, C3, C4
3SW_PushButton_Switch_SMD:SW_SPST_Omron_B3FS-100xPSW1, SW2, SW3
2Conn_01x04_SocketConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1, J2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1AMS1117-5.0Package_TO_SOT_SMD:SOT-223-3_TabPin2U2
1Clone_Pro_Mini_Socket_NoSPHPCM_arduino-library:Clone_Pro_Mini_Socket_NoSPHA1
1Conn_01x08_PinConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ3
1~Library:rdaU1

More from mahmut26/Radio_PCB_ARDUINO

2
  • 2 layers8x8, the printed circuit board in 3D

    8x8

    mahmut26/Radio_PCB_ARDUINO

    18 parts
  • 2 layersYeni radyo, the printed circuit board in 3D

    Yeni radyo

    mahmut26/Radio_PCB_ARDUINO

    18 parts

Similar boards

  • 2 layers36 × 43 mmAsac fc rev a, the printed circuit board in 3D

    Asac fc rev a

    victorhook/asac-fc

    asac fc is an rp2040 based flight controller made for FPV drone flying

    119 parts52GPL-3.0
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24
  • 4 layers100.9 × 71.5 mmRaccoon, the printed circuit board in 3D

    Raccoon

    barbinbrad/raccoon

    Car Hacking PCB and firmware for a USB to CAN interface, with support for 4 CAN transceivers and an optional NEO-MP8 GNSS module.

    56 parts16MIT
  • 4 layers145 × 71.3 mmALL PCBS, the printed circuit board in 3D

    ALL PCBS

    NYDEREK/LineFollower_GRUZIK3.0

    Loved the project? Please consider giving a Star ⭐️

    142 parts15
  • 4 layers99.1 × 68.6 mmSTM32XP, the printed circuit board in 3D

    STM32XP

    MechatronixLab/STM32XP

    Development board based on the STM32F411RET6

    176 parts14
  • 2 layers47.9 × 49.6 mmBMP280Tiny, the printed circuit board in 3D

    BMP280Tiny

    danheeks/vario

    paragliding vario with arduino nano, piezo sounder, bmp180 altimeter, 4x Nimh batterys

    45 parts11
  • 2 layers60 × 90 mmRaccoon, the printed circuit board in 3D

    Raccoon

    mickabrig7/raccoon

    The open-source car bus analyzer !

    62 parts10MIT

Questions

What parts does the Azaltma use?

19 parts, built around the AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Azaltma KiCad files?

From the mahmut26/Radio_PCB_ARDUINO repository on GitHub, at the commit this page was made from: the board is Smaller/azaltma.kicad_pcb and its schematic 8x8/8x8.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Azaltma design in my own project?

Its repository states no licence, so its author keeps all rights: ask mahmut26 before reusing the design.