4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers
Yen ps
mahmut26/BB_PCB_TrialI just found this on my disk
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 56
- Pads
- 193
- Tracks, vias
- 320, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Nov 2024
- Updated
- 30 Nov 2024
Overview
Yen ps is an open-source printed circuit board by mahmut26, from the mahmut26/BB_PCB_Trial repository on GitHub. It is a 2-layer board with 55 parts on 56 nets, routed with 320 tracks and 0 vias.
It is built around the LM324 and AMS1117-3.3. Its parts include 20 resistors, 9 connectors, 4 capacitors, 4 ICs and 4 diodes.
Main components
2
LM324
SOP-14-1.5V~10V 0℃~+70℃ 24V 250nA 3V~20V 4 40mA 50nA 700uA 7mV 80dB SOP-14 Operational Amplifier ROHSHXY MOSFETOperational Amplifier
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdThis was my PSU design...
The .zip contains more of it with current control etc.
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 7 | Conn_01x03_Pin | Connector:FanPinHeader_1x03_P2.54mm_Vertical | 3.3V_Giris_1, 3.3V_Giris_2, 5V_Giris_Role1, POT1, POT2, POT3, POT4 |
| 5 | Conn_01x04_Pin | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J1-Giris1, J2-3.3V_Cıkıs1, J3-3.3V_CIKIS1, J4-5V_Cıkıs1, J5-5V_Cıkıs1 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | C_Polarized_US | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2, C3, C4 |
| 4 | R | Resistor_THT:R_Axial_Power_L20.0mm_W6.4mm_P22.40mm | R1_1, R1_2, R1_3, R1_4 |
| 4 | Screw_Terminal_01x03 | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal | J1, J2, J3, J4 |
| 3 | Conn_01x10_Pin | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | JFeedBack1, JFeedBack2, JRole1 |
| 2 | C_Polarized_US | Capacitor_THT:CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | SW1, SW2 |
| 2 | LM324 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3, U4 |
| 2 | Relay_SPDT | Relay_THT:Relay_SPDT_Finder_36.11 | K1, K2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
Similar boards
- 4 layers99.1 × 68.6 mm
- 4 layers110 × 50 mm
OpenHand v1
AleksaHeler/OpenHand
Our attempt at a prosthetic hand using STM32 microcontroller with custom PCB and mechanics
214 parts13MIT - 4 layers50 × 50 mm
ESP32-Sentinel Kinetic Wireless Dongle
alextrical/ESP32-Sentinel-Kinetic-Wireless-Dongle
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller without a Display
81 parts6CERN-OHL-S-2.0 - 2 layers101.6 × 98.4 mm
- 4 layers96 × 96 mm
- 2 layers92 × 54.6 mm
Currentsensormodule
ZeniteSolar/MSC22
Atalização do Módulo Sensor Can 19 https://github.com/ZeniteSolar/MSC19 Agora com alimentação bipolar +/- 15V para os sensores. Estágio analógico devidamente ajustado.
111 parts2 - 2 layers100 × 100 mm
Combo laser driver
adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections
169 partsGPL-3.0
Questions
What parts does the Yen ps use?
55 parts, built around the LM324 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Yen ps KiCad files?
From the mahmut26/BB_PCB_Trial repository on GitHub, at the commit this page was made from: the board is yen_ps.kicad_pcb and its schematic yen_ps.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Yen ps design in my own project?
Its repository states no licence, so its author keeps all rights: ask mahmut26 before reusing the design.