
Voltage sense
mahip13/BMS-for-auto-drones
This repo includes schematic and stm32 based firmware for the same

This repo includes schematic and stm32 based firmware for the same
Overcharge is an open-source printed circuit board by mahip13, from the mahip13/BMS-for-auto-drones repository on GitHub. It is a 2-layer board of 57.8 × 37.3 mm with 45 parts on 31 nets, routed with 149 tracks and 6 vias.
It is built around the BZX84C24 and MMBT2222A. Its parts include 18 diodes, 12 resistors, 6 capacitors, 3 transistors and 2 connectors.
This directory contains schematics and simulationsfor the BMS for autonomous drones
The .asc or SPICE file simulates all the respective parts of the circuit such as voltage sensing current sensing overcharge and overcurrent protection
Moreover the firmware (multichannel_adc file) is based on STM32F103 which includes multichannel ADC calculation for differnet sensors (3 temperature sensors, 4 current sensors, 1 voltage sensing circuit)
The real-time communication is still in process
This directory does not include the final PCB design
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 |
| 4 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | CELL1, CELL2, CELL3, GND2 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R22, R23, R28 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C13, C17 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R26 |
| 3 | 12k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R21, R27 |
| 3 | 16k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R20, R25 |
| 3 | BZX84C24 | Package_TO_SOT_SMD:SOT-23 | D1, D3, D8 |
| 3 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D4, D9 |
| 3 | MMBT2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 100n | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14, C18 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C8 |
| 1 | Balance Plug | Connector_JST:JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal | J25 |
| 1 | Charger | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |

mahip13/BMS-for-auto-drones
This repo includes schematic and stm32 based firmware for the same

Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.

LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

atomic14/ch32v003-audio
A collection of audio projects for the CH32V003J4M6 RISC-V microcontroller, demonstrating various audio synthesis and playback techniques on an 8-pin, $0.10 microcontroller.

HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .

onionharvester/boardwalk
A little gathering place for my PCBs. This is their favourite hangout spot! 🪼⋆.ೃ࿔*:・

It measures 57.8 × 37.3 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the BZX84C24 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mahip13/BMS-for-auto-drones repository on GitHub, at the commit this page was made from: the board is overcharge/overcharge.kicad_pcb and its schematic current_ocp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask mahip13 before reusing the design.