2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0
2 layers71 × 73 mm
Locus KiCAD
Magdamit173/Locus1- Size
- 71 × 73 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 32
- Pads
- 54
- Tracks, vias
- 63, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 17 Oct 2026
- Updated
- 26 Oct 2026
Overview
Locus KiCAD is an open-source printed circuit board by Magdamit173, from the Magdamit173/Locus repository on GitHub. It is a 2-layer board of 71 × 73 mm with 10 parts on 32 nets, routed with 63 tracks and 0 vias.
Its parts include 5 connectors, 2 resistors, 1 IC and 1 switch.
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 200K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | BMS | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J2 |
| 1 | Buzzer | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | BZ1 |
| 1 | DC JACK | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J6 |
| 1 | EMERGENCY BUTTON | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | SW1 |
| 1 | ESP 32-WROOM-32 | ESP32:ESP32-DevKit-USB-C | U1 |
| 1 | LifePo4 (Vin) | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | MT3068 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J5 |
| 1 | TP5000 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J4 |
Questions
How big is the Locus KiCAD PCB?
It measures 71 × 73 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Locus KiCAD use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Locus KiCAD KiCad files?
From the Magdamit173/Locus repository on GitHub, at the commit this page was made from: the board is Locus_KiCAD/Locus_KiCAD.kicad_pcb and its schematic Locus_KiCAD/Locus_KiCAD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Locus KiCAD design in my own project?
Its repository states no licence, so its author keeps all rights: ask Magdamit173 before reusing the design.
Similar boards
- 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0