
MP Power
ghent360/PrntrBoardV2
32-bit 3D Printer controller board using STM32F407 and replaceable TMC2660/2209 stepper drivers.

Seedcontrol stm32 board is an open-source printed circuit board by MaDengler, from the MaDengler/seedcontrol_stm32 repository on GitHub. It is a 2-layer board of 90 × 72 mm with 50 parts on 84 nets, routed with 651 tracks and 28 vias.
It is built around the MP1584EN and SS34. Its parts include 5 capacitors, 5 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nF | Capacitor_SMD:C_0402_1005Metric | CU1, CU2, CU3, CU4, CU5, CU6 |
| 5 | 150 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | RS11, RS22, RS33, RS44, RS55 |
| 5 | 1µF | Capacitor_THT:C_Rect_L10.0mm_W3.0mm_P7.50mm_MKS4 | CS1, CS2, CS3, CS4, CS5 |
| 5 | 4,7-10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | RS1, RS2, RS3, RS4, RS5 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | R | Resistor_SMD:R_0603_1608Metric | RD1, RD2, RD3, RU1 |
| 3 | C | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4 |
| 2 | C | Capacitor_SMD:C_1206_3216Metric | C5, C6 |
| 1 | 2.2µF | Capacitor_SMD:C_0402_1005Metric | CU7 |
| 1 | 8.2k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_02x20_Counter_Clockwise | custom:STM32_Blackpill_header | JSTM1 |
| 1 | Display | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | JD1 |
| 1 | Info/Switches | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | JI1 |
| 1 | Input | TerminalBlock:TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
| 1 | L | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | MP1584EN | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm | U2 |
| 1 | Programming | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | JP1 |
| 1 | R_Pot | Potentiometer_SMD:Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | SS34 | Diode_SMD:D_SMA | D2 |
| 1 | STM32F401RCTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | Sensors | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | JS1 |
| 1 | ~ | custom:Voltage_converter | P1 |
| 1 | ~ | Diode_THT:D_DO-41_SOD81_P12.70mm_Horizontal | D1 |

ghent360/PrntrBoardV2
32-bit 3D Printer controller board using STM32F407 and replaceable TMC2660/2209 stepper drivers.

4rynv/Eklavya_Gantry
an attempt to automate screwing out and in of screw holes arranged in a matrix formation


enwi/PiSupply
Uninterruptable power supply for Raspberry Pi's, which can also power external HDDs

shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.

12romis/esp32-elrs-rover
Ровер 4WD із танковим приводом на ESP32-S3: керування через ExpressLRS 2.4 ГГц, антизіткнення на ToF-далекомірах, замкнутий контур по енкодерах та аналоговий FPV-відеоканал 5.8 ГГц.


Iam-Madman/stm32-falling-sticks
A DIY reaction-based "falling sticks" game controller built around an STM32 Bluepill.
It measures 90 × 72 mm and has 2 copper layers, 1.6 mm thick.
50 parts, built around the MP1584EN and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MaDengler/seedcontrol_stm32 repository on GitHub, at the commit this page was made from: the board is BoardDesign/seedcontrol_stm32_board/seedcontrol_stm32_board.kicad_pcb and its schematic BoardDesign/seedcontrol_stm32_board/seedcontrol_stm32_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MaDengler before reusing the design.