2 layers98 × 87.9 mm
MainBoardV2
Unimakers/Docs-Unimakers-CDR-2024
La sous répertoire dédiée a l'équipe d'unimakers de la coupe de France de robotique 2024
50 parts2
2 layers110 × 85 mm
BeatBox
madebyshaurya/BeatBoxSpotify Car thing clone
- Size
- 110 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 52
- Pads
- 113
- Tracks, vias
- 182, 20
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 6 Jun 2025
- Updated
- 5 Aug 2025
Overview
BeatBox is an open-source printed circuit board by madebyshaurya, from the madebyshaurya/BeatBox repository on GitHub. It is a 2-layer board of 110 × 85 mm with 22 parts on 52 nets, routed with 182 tracks and 20 vias.
It is built around the ESP32-S3-DEVKITC-1-N8, AMS1117-3.3 and WS2812B. Its parts include 9 capacitors, 5 resistors, 4 ICs, 1 diode and 1 switch. It belongs with the ESP32 boards of this library.
Main components
3
ESP32-S3-DEVKITC-1-N8
-- WiFi Modules ROHSEspressif SystemsWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdBeatBox
Control your spotify music with style!
Think of it as Alexa but it shows your current playing music on the screen and you can use voice commands to change it or play a new song!
Visuals
Schematic
PCB
BOM
| Designator | Footprint | Quantity | Value |
|---|---|---|---|
| BT1 | BatteryHolder_Keystone_1042_1x18650 | 1 | Battery_Cell |
| C1 | CP_Radial_D10.0mm_P5.00mm | 1 | 1000µF |
| C2, C3 | C_Disc_D5.0mm_W2.5mm_P5.00mm | 2 | 0.1µF |
| C4, C5 | C_Disc_D5.0mm_W2.5mm_P5.00mm | 2 | 4.7µF |
| C6, C7 | C_Disc_D5.0mm_W2.5mm_P5.00mm | 2 | 10µF |
| C8 | C_Disc_D5.0mm_W2.5mm_P5.00mm | 1 | 100µF |
| C9 | C_Disc_D5.0mm_W2.5mm_P5.00mm | 1 | 0.1uF |
| D1 | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | 1 | WS2812B |
| M2 | Mic_INMP441_Custom | 1 | ~ |
| R1 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 1 | 330 |
| R2, R3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 2 | 10kΩ |
| R4 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 1 | 100k |
| R5 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | 1 | 27k |
| SW1 | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | 1 | SW_SPST |
| U1 | ILI9341 | 1 | TFT_320x240 |
| U2 | SOT229P700X180-4N | 1 | AMS1117-3.3 |
| U3 | ESP32-S3-DevKitC | 1 | ESP32-S3-DevKitC |
| U4 | TP4056 | 1 | TP4056_Module |
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3 |
| 2 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 2 | 10µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C6, C7 |
| 2 | 4.7µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C5 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C9 |
| 1 | 1000µF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 100µF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C8 |
| 1 | 27k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | AMS1117-3.3 | AMS:SOT229P700X180-4N | U2 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1042_1x18650 | BT1 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U3 |
| 1 | SW_SPST | Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | TFT_320x240 | ILI9341:ILI9341 | U1 |
| 1 | TP4056_Module | TP4056:TP4056 | U4 |
| 1 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
| 1 | ~ | INMP441:Mic_INMP441_Custom | M2 |
Questions
How big is the BeatBox PCB?
It measures 110 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BeatBox use?
22 parts, built around the ESP32-S3-DEVKITC-1-N8, AMS1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BeatBox KiCad files?
From the madebyshaurya/BeatBox repository on GitHub, at the commit this page was made from: the board is src/BeatBox.kicad_pcb and its schematic src/BeatBox.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BeatBox design in my own project?
Its repository states no licence, so its author keeps all rights: ask madebyshaurya before reusing the design.
Similar boards
- 2 layers
E ink multi sensor
heckler/esphome-device-configs
Configuration definitions for local ESPHome files
11 parts4Apache-2.0 - 2 layers
- 2 layers91 × 80.5 mm
Attention Seeker
M-Mrk/Attention-Seeker
A hackpad with features to alert you to notifications (kde only for now). Zone out alot or focus intensely when doing stuff? You also miss some important notifications? Well me too, so I build this so I can hopefully…
21 parts1Apache-2.0 - 4 layers83.3 × 91.7 mm
TXV2 MAIN revB
Mmessiter/LDRC_V2
LockDown Radio Control V2 — RXV2 receiver and Rotorflight/simulator dongle, the iOS and Android apps, and the TXV2 transmitter. Free and open source.
64 parts1GPL-3.0 - 4 layers100 × 50 mm
Pcm5102a mux board
cbaurtx/RetroBox
RetroBox is an internet radio using an ESP32-S3 system on a chip
86 parts - 2 layers100 × 100 mm
- 4 layers25.9 × 63.9 mm
Easyduino ESP32S3
Hanqaqa/Easyduino
Easily dive into different PCB KiCad designs of the most popular microcontroller devboards
35 parts755CERN-OHL-P-2.0