

Lab2 starter
This project is a high-efficiency 24V to 48V boost converter designed for an electric bike motor. Built using a TI F280049C microcontroller, the system delivers precise control and optimized power conversion for…
- Size
- 139.7 × 101.6 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 110
- Pads
- 251
- Tracks, vias
- 220, 21
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 Dec 2024
- Updated
- 8 Dec 2024
Overview
Lab2 starter is an open-source printed circuit board by maanavkoladia, from the maanavkoladia/BoostConverter repository on GitHub. It is a 4-layer board of 139.7 × 101.6 mm with 77 parts on 110 nets, routed with 220 tracks and 21 vias.
It is built around the R-78E12-0.5, R-78E3.3-1.0 and CT416-HSN820DR, with the IR2010PBF and PMEG10020ELRX among its other parts. Its parts include 19 capacitors, 16 connectors, 12 resistors, 4 diodes and 3 ICs.
Main components
5R-78E12-0.5
SIP,11.5x7.6mm-12V、12V -150mA、500mA -40℃~+85℃ 2 20mVp-p 330uF、680uF 85%、94% 8V~24V、15V~36V Buck-Boost Short Circuit Protection ±3% SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesR-78E3.3-1.0
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 3.3V 300uA 50mVp-p 6V~36V 7.5mm 850kHz 90% Short Circuit Protection、Automatic fault recovery Step-down type ±3% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesCT416-HSN820DR
SOIC-8-40℃~+125℃ 0A~20A 100mV/A 1MHz 1mΩ 2500Vrms 3.3V 300ns 6mA SOIC-8 Current Sensors ROHSAllegro MicroSystems, LLCCurrent SensorsIR2010PBF
DIP-14-40℃~+150℃ 10V~20V 10ns 15ns 2 3A 3A 65ns 95ns Half-Bridge IGBT、MOSFET Under Voltage Protection DIP-14 Gate Drivers ROHSInfineon TechnologiesGate DriversPMEG10020ELRX
SOD-123W-65℃~+150℃ 100V 150nA@100V 2A 830mV@2A Independent SOD-123W Schottky Diodes ROHSNexperiaSchottky Diodes
README
README.mdHigh-Efficiency Boost Converter for Electric Bike Motor
This project is a high-efficiency 24V to 48V boost converter designed for an electric bike motor. Built using a TI F280049C microcontroller, the system delivers precise control and optimized power conversion for high-performance motor operation.
Project Overview
-
Precise Control:
- Utilizes the TI F280049C microcontroller to implement high-resolution PWM and ADC-based control loops.
- Enables accurate current sensing and precise MOSFET switching for efficient power conversion.
-
Custom PCB Design:
- Developed a custom PCB layout to minimize parasitic effects and optimize high-frequency power conversion.
- Integrated essential components, including gate drivers, protection circuits, current sensors, and DC power supplies, for a compact and efficient design.
-
Advanced Hardware Design:
- Fabricated a custom bobbin-wound inductor to handle high power requirements.
- Strategically arranged components to minimize electromagnetic interference (EMI) and improve system reliability.
Implementation Highlights
- The boost converter effectively steps up voltage from 24V to 48V, powering an electric bike motor with high efficiency.
- High-resolution PWM ensures precise switching, while ADC-based feedback enables accurate current and voltage control.
- The design emphasizes efficiency and reliability, with advanced EMI mitigation strategies and robust circuit protection.
The High-Efficiency Boost Converter demonstrates a practical and scalable approach to power electronics for electric mobility applications.
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | Conn_01x02 | ECE462L:TP | J7, J8, J9, J10, J11, J12, J13, J14, J15, J16 |
| 7 | TestPoint | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP1, TP2, TP3, TP5, TP7, TP11, TP13 |
| 5 | 0.1μF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C9, C12, C15 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7, C10, C13, C17 |
| 4 | C | Capacitor_SMD:C_0805_2012Metric | C3, C19, C20, C21 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9 |
| 3 | 1n | Capacitor_SMD:C_0805_2012Metric | C8, C11, C14 |
| 3 | R_Small | Resistor_SMD:R_0805_2012Metric | R3, R4, R12 |
| 2 | 100uF | ECE462L:16PX2200MEFC10X20 | C6, C16 |
| 2 | 3.3k | Resistor_SMD:R_0805_2012Metric | R2, R6 |
| 2 | 973582100 | ECE462L:973582100 | J2, J4 |
| 2 | 973582101 | ECE462L:973582101 | J1, J3 |
| 2 | Conn_01x01 | ECE462L:Inductor_wire_conn | J5, J6 |
| 2 | Heatsink | ECE462L:513102B02500G | HS1, HS2 |
| 2 | LED | ECE462L:WL-SMRW_1206_REC | D3, D4 |
| 2 | NMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2 |
| 2 | R | Resistor_SMD:R_0805_2012Metric | R10, R11 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | ? pF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | CT416-HSN820DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | D_Zener | ECE462L:1.5KE75A | D1 |
| 1 | Fuse | ECE462L:03540101ZXGY | F1 |
| 1 | IR2010 | ECE462L:1-2199298-3 | U1 |
| 1 | L | ECE462L:Inductor | L1 |
| 1 | LAUNCHXL-F280039C_BottomHalf | ECE462L:LAUNCHXL-F280049C_BottomHalf | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | PMEG10020ELR | Diode_SMD:Nexperia_CFP3_SOD-123W | D2 |
| 1 | R-78E12-0.5 | ECE462L:R-78E-0.5_RCP | PS2 |
| 1 | R-78E3.3-1.0 | ECE462L:R-78E3.3-1.0 | PS1 |
| 1 | SW_Push_DPDT | ECE462L:SLW1116297AD | SW1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Varistor | ECE462L:V100ZA15P | RV1 |
Similar boards
- 4 layers139.7 × 101.6 mm

- 4 layers92.3 × 48.6 mm

- 2 layers

- 4 layers120 × 100 mm

Hotel test illustrative
rbrtwtrs/A2D-Test
Rev A ESP32-P4 Nano bench simulator/operator1.2. Companion: https://github.com/rovshop/herc-hotel-p4-firmware
162 parts - 2 layers99.1 × 53.3 mm

- 2 layers

Suntastic
snorkman88/suntastic
An ultra low-power management board for IoT devices
120 parts13Apache-2.0 - 4 layers92.5 × 101.6 mm

- 4 layers90.2 × 95.9 mm

PowerDistribution
UChicago-Space-Program/pulse-hardware
This is the central repository for documents related to PULSE-A hardware development.
188 parts1
Questions
How big is the Lab2 starter PCB?
It measures 139.7 × 101.6 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Lab2 starter use?
77 parts, built around the R-78E12-0.5, R-78E3.3-1.0, CT416-HSN820DR and IR2010PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lab2 starter KiCad files?
From the maanavkoladia/BoostConverter repository on GitHub, at the commit this page was made from: the board is hw/Lab2_starter.kicad_pcb and its schematic hw/Lab2_starter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lab2 starter design in my own project?
Its repository states no licence, so its author keeps all rights: ask maanavkoladia before reusing the design.