Skip to the content
2 layers108 × 88 mmControl board, the printed circuit board in 3D

Control board

m0xpd/STRACHEY25

A Random Looping Sequencer for Eurorack

Size
108 × 88 mm
Copper layers
2
Thickness
1.6 mm
Parts
99
Nets
120
Pads
361
Tracks, vias
1,117, 82
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
29 Nov 2023
Updated
25 Mar 2024

Overview

Control board is an open-source printed circuit board by m0xpd, from the m0xpd/STRACHEY repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 108 × 88 mm with 99 parts on 120 nets, routed with 1,117 tracks and 82 vias.

It is built around the TL084-P14, 74HC595N and LM555N. Its parts include 29 resistors, 24 diodes, 6 capacitors, 5 ICs and 3 switches.

Main components

3

README

Hardware/Panel/README.md

Front Panel

This folder describes STRACHEY's front panel.

I designed the panel in KiCad. I've been using KiCad for panel design for over a year so (unlike in electronic aspects of this project) I can't claim to be a new user - but I can confirm that KiCad is great for designing front panels.

There is a .pcb file and a .pro file which together make a KiCad project for the Panel (the schematic is, of course, trivial as the panel has no electrical connections).

These add up to a panel which JLCPCB made for my prototype system in aluminium in black with white silkscreen (as per the design). JLC did their usual excellent job (usual disclaimer), but this white on "black on an aluminium substrate" recipe is very expensive. If you want to save money, you should either change the design to black on white on an aluminium panel or change to an FR4 panel.

You can see the front and rear sides of the prototype panel in the image below:

Parts

99
QtyValueFootprintReferences
24~control board:LED3MMLED1, LED2, LED10, LED11, LED12, LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20, LED21, LED22, LED23 +8
16THONKICONN_JACKcontrol board:WQP-PJ301M-12_JACKU$1, U$2, U$3, U$4, U$5, U$6, U$7, U$8, U$9, U$10, U$11, U$12, U$13, U$14, U$15, U$16
9~control board:0204_7R1, R8, R18, R19, R20, R24, R25, R26, R27
8B100kcontrol board:9MM_SNAP-IN_POTVR2, VR3, VR4, VR5, VR6, VR7, VR8, VR9
71kcontrol board:0204_7R2, R3, R7, R10, R17, R22, R29
6100kcontrol board:0204_7R5, R6, R11, R15, R21, R28
50.1control board:C050-025X075C1, C2, C4, C5, C6
447kcontrol board:0204_7R4, R9, R12, R13
322kcontrol board:0204_7R14, R16, R23
374HC595Ncontrol board:DIL16IC3, IC4, IC5
3MOMENTARY-SWITCH-SPST-PTH-6.0MMcontrol board:TACTILE_SWITCH_PTH_6.0MMS1, S2, S3
2MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottomH1, H2
2~control board:SIL9RN1, RN2
2~control board:1X18JP1, JP3
14u7control board:E2,5-5C3
1A100kcontrol board:9MM_SNAP-IN_POTVR1
1LM555Ncontrol board:DIL08IC1
1TL084Pcontrol board:DIL14IC2
1~control board:1X08JP2

More from m0xpd/STRACHEY

1
  • 2 layers108 × 88 mmSTRACHEY, the printed circuit board in 3D

    STRACHEY

    m0xpd/STRACHEY

    A Random Looping Sequencer for Eurorack

    126 parts25CC-BY-SA-4.0

Similar boards

  • 4 layers130 × 131.3 mmShuffleboard, the printed circuit board in 3D

    Shuffleboard

    anhvuknguyen/Shuffleboard

    Intro to Embedded Systems Final Project

    72 parts
  • 2 layers120 × 80 mmClock i2c l0, the printed circuit board in 3D

    Clock i2c l0

    ekibanu4/STM_32_Clock

    test project for binary clock based in stm32 f4070disk

    77 parts
  • 2 layers160 × 125 mmReflex machine, the printed circuit board in 3D

    Reflex machine

    Mhamednoui/PCB_Designer

    AI-assisted KiCad PCB design pipeline: netlist -> schematic -> routed board -> fab files, with a 3D/simulation webview

    125 parts
  • 2 layers218 × 218 mmChessBoard, the printed circuit board in 3D

    ChessBoard

    Odissus/ChessBoard

    Interactive chess board design based on Arduino and ESP32

    143 parts
  • 4 layers130 × 131.3 mmShuffleboard, the printed circuit board in 3D

    Shuffleboard

    rbala25/shuffleboard

    Multiplayer Shuffleboard — Embedded Firmware (C), PCB Design, Mixed-Signal I/O, and Display + Audio Integration

    72 parts
  • 2 layers78.4 × 64.8 mmPowerNode2, the printed circuit board in 3D

    PowerNode2

    utahrobotics/Electrical-2019-2020

    67 partsMIT
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers87 × 96 mmBraids through hole V1.1 CONTROL, the printed circuit board in 3D

    Braids through hole V1.1 CONTROL

    sebastianbeyer/KOSMO_braids

    This is a KOSMO (Look Mum No Computer) version of the Mutable instruments braids, based on the through-hole version done by sound-force.nl.

    56 parts15

Questions

How big is the Control board PCB?

It measures 108 × 88 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Control board use?

99 parts, built around the TL084-P14, 74HC595N and LM555N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Control board KiCad files?

From the m0xpd/STRACHEY repository on GitHub, at the commit this page was made from: the board is Hardware/Control/control board.kicad_pcb and its schematic Hardware/Control/control board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Control board design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).