2 layers19 × 108 mm
2 layers19 × 108 mm
Patch Socket Board
m0xpd/PATCH6PATCH is a modular patchbay project for Eurorack
- Size
- 19 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 13
- Pads
- 42
- Tracks, vias
- 58, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Mar 2024
- Updated
- 6 Jun 2024
Overview
Patch Socket Board is an open-source printed circuit board by m0xpd, from the m0xpd/PATCH repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 19 × 108 mm with 10 parts on 13 nets, routed with 58 tracks and 0 vias.
README
Hardware/Front Panel/README.mdFront Panel
This folder contains design files for a front panel for the PATCH system, expressed as a KiCad project.
Remember that the schematic is 'empty' - the front panel has no electrical connections.
The front panel has no labels/annotation, because each instance of the system will be put to different use; you can add labels convenient to your own application if you need to.
I find it convenient at least to use different nuts (i.e. knurled or hex) on the sockets to remind me which are inputs and which are outputs, from which I can remember the configuration of the PATCH module. If you are less stingy than me, you could even use coloured nuts!
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | AudioJack2_SwitchT | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J2, J3, J4, J5, J6 |
| 2 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J7, J8 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2 |
Questions
How big is the Patch Socket Board PCB?
It measures 19 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Patch Socket Board use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Patch Socket Board KiCad files?
From the m0xpd/PATCH repository on GitHub, at the commit this page was made from: the board is Hardware/Socket Board/Patch Socket Board.kicad_pcb and its schematic Hardware/Buffered Multiple Board/Patch Buffered Multiple Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Patch Socket Board design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from m0xpd/PATCH
4- 2 layers19 × 108 mm
Patch Buffered Multiple Board
m0xpd/PATCH
PATCH is a modular patchbay project for Eurorack
16 parts6CC-BY-SA-4.0 - 2 layers19 × 108 mm
- 2 layers19 × 108 mm
Patch Passive Multiple Board
m0xpd/PATCH
PATCH is a modular patchbay project for Eurorack
4 parts6CC-BY-SA-4.0
Similar boards
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm
Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0