
FW16 EPD
arthomnix/FW16_EPD
Touchscreen e-paper input module for Framework Laptop 16

Drone is an open-source printed circuit board by LYNCS-Keio, from the LYNCS-Keio/LYNCS-Drone repository on GitHub, published under the MIT licence. It is a 2-layer board of 91.4 × 57.1 mm with 33 parts on 74 nets, routed with 282 tracks and 27 vias.
It is built around the LM2596T-5.0 and SS2040FL. Its parts include 11 connectors, 7 diodes, 6 resistors, 3 capacitors and 2 ICs. It belongs with the robots and motor control boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | SS2040FL | Diode_SMD:D_SOD-123F | D1, D2, D3, D4, D5, D6 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R5, R6 |
| 2 | MountingHole_3mm | MountingHole:MountingHole_3mm | screw, screw |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 22u | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 47u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 989BS-270M | Inductor_SMD:L_12x12mm_H6mm | L1 |
| 1 | BATTRY | RC-Battery-Connectors:XT-60_female | J2 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | DPS310_LEFT | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | DPS310_RIGHT | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J9 |
| 1 | ESC | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J1 |
| 1 | ESP32_LEFT | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J3 |
| 1 | ESP32_RIGHT | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J5 |
| 1 | LM2596T-5 | Package_TO_SOT_THT:TO-220-5_Horizontal_TabDown | U1 |
| 1 | LOGO | locallib:lyncs-logo | G*** |
| 1 | MPU9250 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J8 |
| 1 | Raspberry Pi | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J4 |
| 1 | SKI03021 | Package_TO_SOT_SMD:TO-263-3_TabPin4 | U2 |
| 1 | UDZV5.1B | Diode_SMD:D_SOD-323 | D7 |
| 1 | US-015 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | to ESC Power | RC-Battery-Connectors:XT-60_female | J10 |

arthomnix/FW16_EPD
Touchscreen e-paper input module for Framework Laptop 16

freeDSP/freeDSP-OCTAVIA
8ch Output ADAU1452/1466 DSP Board with Analog/COAX/OPT/USB/Raspberry-Pi Input



lipoyang/StackChanPwd
M5Stack-embedded super cute humanoid controller unit

jobitjoseph/Desktop-Weather-Station
This project offers a practical way to build a clean and minimal weather station using an ESP32 microcontroller and an E-Ink display.


It measures 91.4 × 57.1 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the LM2596T-5.0 and SS2040FL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LYNCS-Keio/LYNCS-Drone repository on GitHub, at the commit this page was made from: the board is KiCad/Drone/Drone.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).