
Retro programmer
lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus
Input output.Multi is an open-source printed circuit board by lynchaj, from the lynchaj/duodyne repository on GitHub. It is a 2-layer board of 235 × 160 mm with 167 parts on 397 nets, routed with 3,623 tracks and 116 vias.
It is built around the MAX232N, 74LS245SC and CH376S, with the 74LS374PC, 74LS04PC and TL16C2552FN among its other parts. Its parts include 54 capacitors, 35 resistors, 24 connectors, 23 ICs and 11 diodes. It belongs with the retro computing and games boards and the ESP32 and FPGA and CPLD boards of this library.
duodyne is a hobbyist retrocomputer system comprised of modules on a system bus. It is specifically designed to run RomWBW, however, provides support for multiple processor architectures and has a flexible and expandable system bus.
The system bus is designed to support multiple vintage or retro computer processor architectures such as those from Intel, Zilog, Motorola, Mostek, etc. The Z80 is the primary CPU used to develop the initial round of peripherals.
Duodyne borrows heavily from previous computer systems. The form factor is similar to S-100 and VME. The bus is electrically is derived from ECB with many extensions to support other processor architectures and improved power distribution. There are multiple pins for 5V and ground. +12V and -12V are supported. 3.3V and other values can be derived on board using voltage regulators.
The plan for the system is to have balance between functionality and complexity. A single function per board has good distribution and easy expansion but leads to many boards and a large backplane which can lead to electrical and signal distribution issues. However, full integration into a single board computer reduces complexity somewhat but can make expansion difficult.
Duoodyne's bus based approach with a generous board form factor allows for a blend of integration and distribution of two or more functions per board leading to a smaller overall backplane yet retaining flexibility for easy expansion.
The duodyne core system is defined as an 4-slot or 8-slot backplane, a Z80 or other processor (currently, Z80, 65C816, and TMS9995 are supported), and a ROMRAM board. The ROMRAM memory board assumes an 8-bit data bus so CPU's with larger data busses may require dedicated memory boards. The Z80 processor includes a debugging serial port for console access. The boot ROM is included on the ROMRAM board.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 0.1u | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C10, C11, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C36 +16 |
| 16 | 1000 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R4, R6, R7, R9, R10, R11, R12, R13, R14, R15, R16, R21, R22, R35 |
| 12 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C22, C34, C35, C44, C45, C54, C55, C65, C66, C72, C73 |
| 9 | 2.2nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C12, C13, C14, C15, C16, C17, C18, C19, C20 |
| 9 | 27 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R18, R19, R20, R23, R24, R25, R26, R28 |
| 7 | LED | LED_THT:LED_D3.0mm | D3, D4, D5, D6, D7, D8, D10 |
| 6 | NetTie_2 | NetTie:NetTie-2_THT_Pad0.3mm | NT1, NT2, NT3, NT4, NT5, NT6 |
| 5 | 74LS244 | Package_DIP:DIP-20_W7.62mm | U3, U7, U21, U22, U23 |
| 4 | 4700 | Resistor_THT:R_Array_SIP9 | RN1, RN4, RN7, RN8 |
| 3 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R8, R37 |
| 3 | 74LS06 | Package_DIP:DIP-14_W7.62mm | U1, U19, U25 |
| 3 | CONN_02X25 | Connector_IDC:IDC-Header_2x25_P2.54mm_Horizontal | P1, P2, P3 |
| 3 | LED | LED_THT:LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm | D2, D9, D11 |
| 2 | 1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R31, R33 |
| 2 | 10K | Resistor_THT:R_Array_SIP9 | RN5, RN6 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R27, R29 |
| 2 | 74LS374 | Package_DIP:DIP-20_W7.62mm | U18, U20 |
| 2 | 74LS688 | Package_DIP:DIP-20_W7.62mm | U2, U12 |
| 2 | MAX232 | Package_DIP:DIP-16_W7.62mm | U8, U9 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 100K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R32 |
| 1 | 100u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C21 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 470 | Resistor_THT:R_Array_SIP9 | RN9 |
| 1 | 4700 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R36 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U16 |
| 1 | 74LS08 | Package_DIP:DIP-14_W7.62mm | U10 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm | U5 |
| 1 | BYPASS | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | P7 |
| 1 | CH376S | Package_DIP:DIP-28_W15.24mm_Socket | U27 |
| 1 | CH376S-EVT | CH376S-EVT:CH376S-EVT | J23 |
| 1 | Crystal | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | DU-A INTERRUPT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J1 |
| 1 | DU-B INTERRUPT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J13 |
| 1 | DUART CLK | Package_DIP:DIP-14_W7.62mm | U6 |
| 1 | EXT RECOVERY | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | GAL22V10 | Package_DIP:DIP-24_W7.62mm | U11 |
| 1 | IO PORT ADDR | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | SW2 |
| 1 | IO PORT ADDR | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | SW3 |
| 1 | KM INTERRUPT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | LP2950-3.3_TO92 | Package_TO_SOT_THT:TO-92_HandSolder | U32 |
| 1 | MICRO SD CARD | Adafruit MicroSD Module:Adafruit MicroSD Module | J9 |
| 1 | MSE OPT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J22 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Molex_104031-0811 | J8 |
| 1 | PAR INTERRUPT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J2 |
| 1 | PARALLEL | Connector_IDC:IDC-Header_2x13_P2.54mm_Horizontal | P6 |
| 1 | PS/2 KM | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | J14 |
| 1 | PS2 OPT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J21 |
| 1 | RECOVERY | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | RESET SEL | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J20 |
| 1 | RS-232 A | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | P4 |
| 1 | RS-232 B | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | P5 |
| 1 | TL16C2552FN | Package_LCC:PLCC-44_THT-Socket | U4 |
| 1 | TTL PWRA | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | TTL PWRB | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | TTL SERIAL | Connector_IDC:IDC-Header_2x06_P2.54mm_Horizontal | J6 |
| 1 | USB | Connector_IDC:IDC-Header_2x05_P2.54mm_Horizontal | J15 |
| 1 | USB INTERRUPT | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J12 |
| 1 | VDD TST | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | VT82C42-PLCC44 | Package_LCC:PLCC-44_THT-Socket | U26 |

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus

lynchaj/duodyne
Duodyne is a hobbyist retrocomputer system designed to run ROMWBW. It is comprised of modules on a system bus




hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics


fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

danwerner21/CortexPC
Powertran Cortex clone. PC formfactor, based on Stuart Conner's MiniCortex

It measures 235 × 160 mm and has 2 copper layers, 1.6 mm thick.
167 parts, built around the MAX232N, 74LS245SC, CH376S and 74LS374PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lynchaj/duodyne repository on GitHub, at the commit this page was made from: the board is !Development/06 input-output.Multi, V1.1/input-output.Multi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lynchaj before reusing the design.