Skip to the content
2 layers214.5 × 55 mmPopn2, the printed circuit board in 3D

pop'n controller v2

Size
214.5 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
78
Pads
221
Tracks, vias
410, 100
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Apr 2026
Updated
7 Apr 2026

Overview

Popn2 is an open-source printed circuit board by lutetjeff, from the lutetjeff/popn2 repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 214.5 × 55 mm with 67 parts on 78 nets, routed with 410 tracks and 100 vias.

It is built around the ULN2003A. Its parts include 28 connectors, 19 resistors, 5 capacitors, 5 diodes and 3 ICs. It belongs with the STM32 boards of this library.

Main components

1

README

README.md

popn2 (lutet)

version 2 of my personal pop'n music controller! we don't talk about version 1.

Render of the Controller Final Product Internal Shot

here is me clearing my first 44 on this controller: video link

Repository Hierarchy

  • daughterboard/: KiCAD PCB files for the USB and power daughterboard.
  • firmware/: Source code for the mainboard's firmware.
  • mainboard/: KiCAD PCB files for the STM32F072 mainboard.
  • media/: Images, renders, and video showcases of the controller.
  • production/: Vector files for laser-cutting the physical enclosure layers.
  • popn2.f3z: Fusion 360 source file for the mechanical design.

Mechanical Design

The physical enclosure of the controller is built using a stacked layer design. The stackup consists of:

  • 13 layers of birch plywood (Layers 1 through 13). The nominal thickness is 1/4", but the actual real-world thickness is about 5.2mm per layer.
  • 1 layer of acetal/POM measuring 3/8" (9.5mm) thick for the top layer.

Buttons & Hardware

  • Gameplay Buttons: We use 100mm Samducksa buttons from ISTMALL for the 9 main gameplay buttons. We highly recommend getting the aftermarket 100g Samducksa springs from ISTMALL rather than using the stock springs.
  • Side Buttons (Pop-kuns): The side buttons are these 60mm OEM round buttons: Amazon Link

Mainboard

The mainboard is powered by an STM32F072 microcontroller, and also functions as a generic 12-input 12-output arcade game controller. It uses individual pins for each button and darlington arrays to drive 12V LEDs.

Daughterboard

The daughterboard handles the external inputs for the controller. The KiCAD PCB files define a board that takes 12V and USB in and passes them along to the mainboard via a 10-pin (2x5) ribbon cable.

Firmware

The firmware for the STM32F072 on the mainboard is included in this repository. For more details, please see the firmware README.

Production

The production/ folder contains the production files for laser cutting each individual layer. The naming convention for these files is sl[layer][part], where [part] is at most one digit. There are also combined production files in production/combined/ - beware that one of the pieces is missing and I don't remember which one.

Special Thanks

  • Illini Rhythm Syndicate (link)
  • ECE OpenLab at UIUC (link)

As Seen At

Parts

67
QtyValueFootprintReferences
24Conn_01x02TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mmJ10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24, J25 +8
120Resistor_SMD:R_0805_2012MetricR5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16
5LEDLED_SMD:LED_0805_2012MetricD1, D2, D3, D4, D5
5MountingHole_PadMountingHole:MountingHole_3.2mm_M3_ISO14580_PadH1, H2, H3, H4, H5
40.1uFCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4
310kResistor_SMD:R_0805_2012MetricR1, R2, R19
32.2kResistor_SMD:R_0805_2012MetricR3, R4, R17
2SW_PushButton_Switch_SMD:SW_SPST_PTS810SW1, SW2
2ULN2003APackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU2, U3
11uFCapacitor_SMD:C_0805_2012MetricC5
14.7kResistor_SMD:R_0805_2012MetricR18
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ28
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ27
1Conn_01x05Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_VerticalJ2
1STM32F072C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1ribbonConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ1

More from lutetjeff/popn2

1
  • 2 layers40.8 × 55 mmDaughterboard, the printed circuit board in 3D

    Daughterboard

    lutetjeff/popn2

    pop'n controller v2

    18 parts3BSD-3-Clause

Similar boards

  • 2 layers107 × 54 mmInterface board 1, the printed circuit board in 3D

    Interface board 1

    Green-bms/SmartBMS

    Open source Smart Battery Management System

    63 parts756
  • 4 layers93.3 × 60.3 mmArduino 386EX V5, the printed circuit board in 3D

    Arduino 386EX V5

    dbalsom/arduinoX86

    An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs

    56 parts114
  • 2 layers52 × 61 mmArduino motorfocus, the printed circuit board in 3D

    Arduino motorfocus

    fehlfarbe/arduino-motorfocus

    Arduino motorfocus with moonlite protocol for telescopes

    23 parts58MIT
  • 4 layers199.9 × 69.3 mmZaphod controller, the printed circuit board in 3D

    Zaphod controller

    Scottapotamas/zaphod-bot

    A DIY high performance delta-bot for fun, and lightpainting...

    251 parts53
  • 4 layers285.1 × 48.1 mmAyab esp32, the printed circuit board in 3D

    Ayab esp32

    AllYarnsAreBeautiful/ayab-hardware

    Contains the schematics and layouts for the AYAB Arduino shield

    246 parts50CC-BY-SA-4.0
  • 2 layersDrehorgel20, the printed circuit board in 3D

    Drehorgel20

    bixb922/crank-organ

    MIDI based crank organ software and hardware

    14 parts47MIT
  • 2 layers40 × 80 mmSplitflappcb, the printed circuit board in 3D

    Splitflappcb

    codingcatgirl/split-flap-fae-pcb

    Alternative drop-in replacement PCB for David Kingsman's split-flap display

    46 parts31Apache-2.0
  • 2 layers177.9 × 187.4 mmAudio board 0033 rev.a, the printed circuit board in 3D

    Audio board 0033 rev.a

    palazzol/CyberamicControlCenter

    Repo for docs and info about the Cyberamic Control Center

    105 parts16

Questions

How big is the Popn2 PCB?

It measures 214.5 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Popn2 use?

67 parts, built around the ULN2003A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Popn2 KiCad files?

From the lutetjeff/popn2 repository on GitHub, at the commit this page was made from: the board is mainboard/mainboard.kicad_pcb and its schematic daughterboard/daughterboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Popn2 design in my own project?

Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).