2 layers50.8 × 28.6 mm
Beaglebone obd
KoffeinFlummi/rustbucket
Access your car's diagnostics with a BeagleBone Blue and Rust.
20 parts60GPL-3.0
2 layers28 × 51.5 mm
BLLED
Luro02/pcb-blledPrinted Circuit Board Design for controlling an led strip with a bambulab printer
- Size
- 28 × 51.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 5
- Pads
- 18
- Tracks, vias
- 16, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Aug 2024
- Updated
- 10 Aug 2024
Overview
BLLED is an open-source printed circuit board by Luro02, from the Luro02/pcb-blled repository on GitHub. It is a 2-layer board of 28 × 51.5 mm with 11 parts on 5 nets, routed with 16 tracks and 1 via.
It is built around the IRLB8721PBF. Its parts include 3 connectors, 2 resistors and 1 transistor.
Main components
1Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_M3_3.2mm_Pad | PCM_SL_Mechanical:MountingHole_3.2mm_Pad | H1, H2, H3, H4 |
| 1 | IRLB8721 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | Input | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | LEDs | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | P1S | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Pull-down Resistor | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | Resistor | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Questions
How big is the BLLED PCB?
It measures 28 × 51.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BLLED use?
11 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BLLED KiCad files?
From the Luro02/pcb-blled repository on GitHub, at the commit this page was made from: the board is BLLED.kicad_pcb and its schematic BLLED.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BLLED design in my own project?
Its repository states no licence, so its author keeps all rights: ask Luro02 before reusing the design.
Similar boards
- 2 layers99.1 × 99.1 mm
- 2 layers36 × 31 mm
ESPDimmer
stelioskat/esp8266-led-dimmer
Wifi enabled LED strip dimmer that is controlled using MQTT messages.
11 parts20MIT - 2 layers70.3 × 30.2 mm
- 4 layers104.2 × 77.7 mm
- 4 layers69.9 × 44.5 mm
DoughLee2
chl33/Dough133
A temperature-controlled container for proofing and fermenting soughdough
62 parts3MIT - 2 layers61 × 78.7 mm
- 2 layers33.8 × 49.5 mm
EspAtomizerpcbv3rev1
Adamibus/ESPAtomizer-iOS
This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.
21 parts1