
Mainboard-2023
luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

The eletronics projects of our robots and basestation.
Majestix is an open-source printed circuit board by luhbots, from the luhbots/luhsoccer_electronics repository on GitHub. It is a 2-layer board of 81 × 82.7 mm with 23 parts on 15 nets, routed with 96 tracks and 25 vias.
It is built around the IXXX160N65C4, MCP14A0154-E/MS and BYV60W-600PT2Q. Its parts include 7 resistors, 5 connectors, 3 capacitors, 2 diodes and 2 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 2 | 499 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3, R4 |
| 2 | 8,2 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6 |
| 2 | BYV60W-600PT2Q | Package_TO_SOT_THT:TO-247-2_Vertical | D1, D2 |
| 2 | Conn_01x02_Female | Obelix_Libary:AMASS_XT60-F_1x02_P7.20mm_Vertical_modified | J5, J6 |
| 2 | IXXX160N65C4 | Package_TO_SOT_THT:TO-247-3_Vertical | Q1, Q2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H3 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | 10M | Resistor_SMD:R_2010_5025Metric_Pad1.52x2.65mm_HandSolder | R7 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | CP | Capacitor_THT:CP_Radial_D30.0mm_P10.00mm_SnapIn | C3 |
| 1 | Conn_01x02_Female | Obelix_Libary:AMASS_XT30U-F_1x02_P5.0mm_Vertical_modified | J2 |
| 1 | Conn_01x02_Male | Connector_Molex:Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical | J1 |
| 1 | Conn_01x04_Male | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J3 |
| 1 | MCP14A0154-E/MS | Package_SO:MSOP-8_3x3mm_P0.65mm | S1 |
| 1 | VOD205T-SamacSys_Parts | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | IC1 |

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.


luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.

luhbots/luhsoccer_electronics
The eletronics projects of our robots and basestation.



google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards





It measures 81 × 82.7 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the IXXX160N65C4, MCP14A0154-E/MS and BYV60W-600PT2Q. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the luhbots/luhsoccer_electronics repository on GitHub, at the commit this page was made from: the board is Majestix/Majestix.kicad_pcb and its schematic Asterix/ControlUnit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask luhbots before reusing the design.