2 layers40 × 30 mm
2 layers15.2 × 20.3 mm
Closed loop adapter
Ludwig-3D/stepsticks- Size
- 15.2 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 11
- Pads
- 18
- Tracks, vias
- 21, 16
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 May 2024
- Updated
- 6 Aug 2024
Overview
Closed loop adapter is an open-source printed circuit board by Ludwig-3D, from the Ludwig-3D/stepsticks repository on GitHub, published under the MIT licence. It is a 2-layer board of 15.2 × 20.3 mm with 3 parts on 11 nets, routed with 21 tracks and 16 vias.
It belongs with the interfaces and adapters boards of this library.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x08_Pin | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J3 |
Questions
How big is the Closed loop adapter PCB?
It measures 15.2 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Closed loop adapter use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Closed loop adapter KiCad files?
From the Ludwig-3D/stepsticks repository on GitHub, at the commit this page was made from: the board is closed-loop-adapter/closed-loop-adapter/closed-loop-adapter.kicad_pcb and its schematic closed-loop-adapter/closed-loop-adapter/closed-loop-adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Closed loop adapter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT