
Sensor implant
lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

WIP hardware design files for a sensor implant for my bachelors thesis.
Upper Sensor is an open-source printed circuit board by lucysrausch, from the lucysrausch/sensor-implant repository on GitHub, published under the MIT licence. It is a 2-layer board of 15 × 18.1 mm with 3 parts on 15 nets, routed with 143 tracks and 69 vias.
It belongs with the sensors and measurement boards of this library.
WIP hardware design files for a sensor implant for my bachelors thesis.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_02x05_Odd_Even_MountingPin | DF37NC-10DS-0.4V(51):DF37NC10DS04V51 | J11, J12 |
The 2 most common of 3 parts.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.

lucysrausch/sensor-implant
WIP hardware design files for a sensor implant for my bachelors thesis.


hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO


atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️




hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
It measures 15 × 18.1 mm and has 2 copper layers, 0.6 mm thick.
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lucysrausch/sensor-implant repository on GitHub, at the commit this page was made from: the board is hardware/pcbs/upper_sensor_bond/upper_Sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).