2 layers84.5 × 25.8 mm
PhasedUltrasonicArray
Tonikiller10000/UltrasonicPhasedArray
An ultrasonic Phased Array made out of 8 10mm ultrasonc transmitters.
19 parts3
4 layers304.6 × 154.2 mm
Full Backplane
lucanatorvs/Cluster-Backplane- Size
- 304.6 × 154.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 173
- Pads
- 419
- Tracks, vias
- 777, 166
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Mar 2024
- Updated
- 15 Jun 2024
Overview
Full Backplane is an open-source printed circuit board by lucanatorvs, from the lucanatorvs/Cluster-Backplane repository on GitHub. It is a 4-layer board of 304.6 × 154.2 mm with 69 parts on 173 nets, routed with 777 tracks and 166 vias.
It is built around the SN65HVD230D, TC78H621FNG,EL and LM358, with the RCLAMP0502B among its other parts. Its parts include 23 capacitors, 14 resistors, 10 ICs, 3 diodes and 3 crystals. It belongs with the ESP32 and RP2040 boards of this library.
Main components
4
SN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
TC78H621FNG,EL
TSSOP-16-30℃~+85℃ 1、2 2 2.5V~15V 2.7V~5.5V 800mA 800mΩ Bipolar Driver Yes TSSOP-16 Stepper Motor Driver ROHSToshibaStepper Motor Driver
LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier
RCLAMP0502B
SOT-523-55℃~+125℃ 0.35pF、0.5pF 2 200nA 4A@8/20us 5V 6.8V 68W@8/20us 9V、15V ESD IEC 61000-4-2、IEC 61000-4-5 Unidirectional SOT-523 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdeZ Cluster-Backplane Project
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4, C5, C7, C8, C10, C11, C13, C14 |
| 7 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R13 |
| 5 | 10uF | Capacitor_SMD:CP_Elec_5x5.4 | C3, C6, C9, C12, C15 |
| 5 | TC78H621FNG | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U3, U4, U5, U6, U7 |
| 4 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C18, C19, C20, C21 |
| 3 | 0R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R11, R12 |
| 2 | 60K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8 |
| 2 | Conn_02x13_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | X16, X17 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C23 |
| 1 | 100uF/50V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C16 |
| 1 | 1A | Fuse:Fuse_0402_1005Metric_Pad0.77x0.64mm_HandSolder | F1 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 1N5819 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 1 | 330uF/16V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C17 |
| 1 | 330uH | Inductor_THT:L_Radial_D9.5mm_P5.00mm_Fastron_07HVP | L1 |
| 1 | 3K9 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14 |
| 1 | 3v3 | Diode_SMD:D_MiniMELF_Handsoldering | D3 |
| 1 | Adafruit_Feather_HUZZAH32_ESP32 | Module:Adafruit_Feather | A1 |
| 1 | BACKLIGHT1 | Library:Biglight | LA3 |
| 1 | BACKLIGHT2 | Library:Biglight | LA4 |
| 1 | BACKLIGHT3 | Library:Biglight | LA5 |
| 1 | Conn_01x06_Socket | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x07_Socket | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J6 |
| 1 | Conn_02x06_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | X271 |
| 1 | Handbrake | Library:Smallight | LA7 |
| 1 | Indicator_L | Library:Smallight | LA1 |
| 1 | Indicator_R | Library:Smallight | LA2 |
| 1 | LM2575-5.0BU | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U9 |
| 1 | LM358 | Package_SO:SSOP-8_5.25x5.24mm_P1.27mm | U8 |
| 1 | NMOS | Library:IRFH9714 | Q1 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | RCLAMP0502B | Package_TO_SOT_SMD:SOT-416 | D2 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | SRS_Light | Library:Smallight | LA6 |
| 1 | TLC59711 dev board | Library:Adafruit TLC59711 | U2 |
| 1 | ~ | Library:Backplane | B1 |
Questions
How big is the Full Backplane PCB?
It measures 304.6 × 154.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Full Backplane use?
69 parts, built around the SN65HVD230D, TC78H621FNG,EL, LM358 and RCLAMP0502B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Full Backplane KiCad files?
From the lucanatorvs/Cluster-Backplane repository on GitHub, at the commit this page was made from: the board is Kicad-Project/Full-Backplane.kicad_pcb and its schematic Kicad-Project/DoubleHBridge.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Full Backplane design in my own project?
Its repository states no licence, so its author keeps all rights: ask lucanatorvs before reusing the design.
Similar boards
- 2 layers96.5 × 68.6 mm
EZ Green
lucanatorvs/eZ-Green
This repository contains the firmware and related files for the eZ-Green gauge cluster project, designed for a BMW E36, as part of an EV conversion detailed on vanstraatenelectric.nl.
44 parts - 4 layers28.6 × 38.2 mm
- 2 layers100 × 62 mm
Sodar
Stachu1/Sodar
Sodar is a semester project exploring directional ultrasonic object detection using a custom 19-element phased array.
74 parts - 4 layers71 × 100 mm
Oscar components
dchwebb/Oscar
Eurorack 3 Channel Oscilloscope based on ARM STM32F446 MCU
71 parts42Unlicense - 4 layers60 × 100 mm
- 2 layers80 × 65 mm
PixAppleV1.0
mrkingseasheep/PixApple
PixApple is designed as a RP2040 breakout board. It features 8 general use GPIOs, 1 SPI interface, 1 I2C interface, 4 ADC channels, 4 PWM channels and a CAN bus.
85 parts1GPL-3.0 - 2 layers100 × 100 mm
