Skip to the content
2 layers155 × 70 mmGd keypad, the printed circuit board in 3D

Custom magnetic switch keypad for geometry dash

Size
155 × 70 mm
Copper layers
2
Thickness
1.2 mm
Parts
61
Nets
75
Pads
276
Tracks, vias
532, 76
Pours
10
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Jun 2026
Updated
11 Aug 2026

Overview

Gd keypad is an open-source printed circuit board by louismessonnier, from the louismessonnier/3H6MGD repository on GitHub, published under the MIT licence. It is a 2-layer board of 155 × 70 mm with 61 parts on 75 nets, routed with 532 tracks and 76 vias.

It is built around the AT32F405RCT7, TLV75733PDBV and USBLC6-2SC6, with the XC6206P332MR-G, TS-1187A-B-A-B and BSMD0805-050-24V among its other parts. Its parts include 22 capacitors, 7 ICs, 6 diodes, 4 resistors and 3 switches. It belongs with the keyboards and input boards of this library.

Main components

7

README

README.md

3H6MGD

A custom analog macropad for Geometry Dash, built around magnetic Hall-effect switches for continuous key-travel sensing. The macroapd has three analog jump keys alongside six mechanical keys and a rotary encoder for volume control.

GD Keypad, left view


Why analog switches

Most keyboards report a key as simply pressed or not pressed. Hall-effect switches instead measure how far the key has travelled, by reading the field of a magnet in the switch stem with a linear sensor on the PCB. That continuous position enables features that matter in a timing-based game like Geometry Dash — primarily adjustable actuation (choose exactly how far down counts as a press). This board brings that to a compact macropad.

Features

  • 3 analog Hall-effect jump keys programmable with hmkconf
  • 6 mechanical keys in a diode matrix for non-jump inputs
  • Rotary encoder mapped to per-application volume and mute for Geometry Dash
  • 8 kHz USB polling via the AT32F405's high-speed USB
  • Runs libhmk: analog behaviour is configured live in the browser through hmkconf
  • USB-C, flashed over WebUSB DFU

Hardware

  • MCU: Artery AT32F405RCT7
  • Analog switches: Wooting Lekker Tikken Medium, with MT9102ET linear Hall sensors (SOT-23-3) on the PCB
  • Mechanical switches: MX switches on GATERON Upgrade Hot-swap PCB 2.0 Socket-KS-2P02B01-01-a
  • Rotary encoder: Alps EC11E15244G1 30 detent with push switch
  • PCB: 2-layer, 1.2 mm, designed in KiCad, manufactured by JLCPCB
  • Case: two-piece sandwich, printed in PETG or PLA, with a printed knob

PCB, front PCB, back

Firmware

The board runs libhmk. Everything about the firmware (how the board is defined, the custom module that adds the mechanical matrix and encoder, how to build and flash it, and the calibration and volume-control setup) is in firmware/README.md.

Repository layout

text
firmware/   libhmk keyboard definition, custom matrix + encoder module, build docs
kicad/      KiCad project (schematic and PCB)_
cad/        Case and knob models
images/     Renders and photos
docs/       Design notes and references

Acknowledgements

This project builds on the open-source Hall-effect keyboard community:

License

The firmware (firmware/) is licensed under GNU General Public License v3.0, inherited from libhmk, on which it is based. The hardware (kicad/) and case (cad/) files are licensed under MIT License. The encoder knob is a third-party design under CC BY-NC 4.0 — see Acknowledgements.

Parts

61
QtyValueFootprintReferences
9100nCapacitor_SMD:C_0402_1005MetricC1, C3, C5, C9, C154, C155, C156, C158, C160
6DiodeDiode_SMD:D_SOD-123D1, D2, D3, D4, D5, D6
6MX_SW_HSPCM_marbastlib-mx:SW_MX_HS_KS-2P02B01-01_1uMX1, MX2, MX3, MX4, MX5, MX6
6MountingHole_PadMountingHole:MountingHole_2.7mm_M2.5_DIN965_PadH1, H2, H3, H4, H5, H6
42.2uCapacitor_SMD:C_0603_1608MetricC148, C149, C150, C151
34.7nCapacitor_SMD:C_0402_1005MetricC2, C4, C6
3SW_MX_HEPCM_marbastlib-he:SW_MX_HE_0deg_1uU5, U6, U7
210nCapacitor_SMD:C_0402_1005MetricC7, C8
212kResistor_SMD:R_0402_1005MetricR3, R4
230pCapacitor_SMD:C_0603_1608MetricC152, C153
25.1kResistor_SMD:R_0402_1005MetricR1, R2
2TS-1187A-B-A-BButton_Switch_SMD:SW_Push_1P1T_XKB_TS-1187ASW1, SW2
110uCapacitor_SMD:C_0603_1608MetricC157
11uCapacitor_SMD:C_0603_1608MetricC159
1AT32F405RCT7Package_QFP:LQFP-64_10x10mm_P0.5mmU1
1BSMD0805-050-24VFuse:Fuse_0805_2012MetricF1
1LOGOlogos:gd_cubeG***
1LOGOlogos:gd_cube_cut+editedG***
1LOGOlogos:gd_ufoG***
1RotaryEncoder_Switch_MPPCM_marbastlib-various:ROT_Alps_EC11E-SwitchSW3
1TC2030Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_VerticalJ3
1TLV75733PDBVPackage_TO_SOT_SMD:SOT-23-5U3
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J2
1X322512MSB4SICrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1XC6206P332MR-GPackage_TO_SOT_SMD:SOT-23-3U4

Similar boards

  • 2 layers284.7 × 94.2 mmHE60, the printed circuit board in 3D

    HE60

    peppapighs/HE60

    60% Hall-effect keyboard

    332 parts118GPL-3.0
  • 2 layers301.8 × 97 mmM256-WHE, the printed circuit board in 3D

    M256-WHE

    peppapighs/M256-WHE

    M256-WHE is a Hall-effect keyboard PCB, specifically designed for Mode Encore, Mode SixtyFive v2, and Mode Envoy [1].

    318 parts4GPL-3.0
  • 2 layers238.1 × 76.2 mmChai45HE, the printed circuit board in 3D

    Chai45HE

    gohanda11/Chai45HE

    Chai45HE is a 40% Hall-effect keyboard based on the HE60 project. This is a modified version that adapts the original 60% design to a compact 40% layout.

    228 parts1GPL-3.0
  • 2 layers242.3 × 104.1 mmRowLow52HE, the printed circuit board in 3D

    RowLow52HE

    sam1dare-kbd/RowLow52HE

    RowLowHE52 is a 50% Hall-effect keyboard

    261 parts1GPL-3.0
  • 2 layers287.1 × 94.2 mmSplit60HE, the printed circuit board in 3D

    Split60HE

    gohanda11/Split60HE

    Split60HE is a split (left/right) version of the 60% Hall-effect keyboard HE60, designed in KiCad.

    375 partsGPL-3.0
  • 2 layers75.2 × 75.2 mmHE16, the printed circuit board in 3D

    HE16

    peppapighs/HE16

    Hall-Effect Macropad with 8kHz Polling Rate

    103 partsGPL-3.0
  • 2 layers49.5 × 29.2 mmSymm60HE Daughterboard, the printed circuit board in 3D

    Symm60HE Daughterboard

    Mokeded/Symm60HE

    Symmetrical Hall effect Alice keyboard based off of the Doe

    40 parts2GPL-3.0
  • 4 layers64.6 × 55.2 mmWhisker, the printed circuit board in 3D

    Whisker

    HeyPCB/whisker

    Drop-in controller for Petoi's Nybble robot cat running the stock OpenCat firmware: ATmega328P, PCA9685, MPU-6050, USB-C, 3 A buck, protected battery input. 4-layer KiCad 10 board plus printed cradle.

    118 partsCERN-OHL-S-2.0

Questions

How big is the Gd keypad PCB?

It measures 155 × 70 mm and has 2 copper layers, 1.2 mm thick.

What parts does the Gd keypad use?

61 parts, built around the AT32F405RCT7, TLV75733PDBV, USBLC6-2SC6 and XC6206P332MR-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Gd keypad KiCad files?

From the louismessonnier/3H6MGD repository on GitHub, at the commit this page was made from: the board is kicad/gd-keypad-pcb/gd-keypad.kicad_pcb and its schematic kicad/gd-keypad-pcb/gd-keypad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Gd keypad design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).