Skip to the content
2 layers60.6 × 100 mmMseAddOn, the printed circuit board in 3D

Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education

Size
60.6 × 100 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
53
Pads
141
Tracks, vias
341, 44
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
18 Jun 2023
Updated
16 Jul 2025

Overview

MseAddOn is an open-source printed circuit board by logisim-evolution, from the logisim-evolution/GECKO5Education repository on GitHub, published under the MIT licence. It is a 2-layer board of 60.6 × 100 mm with 17 parts on 53 nets, routed with 341 tracks and 44 vias.

It is built around the AR1021-I/SS, 62684-402100ALF and QTE-020-01-F-D-A. Its parts include 5 resistors, 3 capacitors, 3 switches, 2 connectors and 1 IC.

Main components

3

README

README.md

GECKO5Modular

The Gecko5Modular is a new take on an open hardware educational platform. The ideas of the Gecko5Modular are based on the open hardware ULX3S board, the Gecko4Education line of boards, and the recently developed Leguan development board.

3D preview:

TOP

This is a small (60.6x100 mm) standalone FPGA board for education, research and general purpose. It's open source and open hardware. It continues my line of educational boards used in the past for teaching and research projects.

Developer's guide

Detailed information how to use the board can be found here.

Production

The prototypes for these boards were produced and mounted by Eurocircuits.

Financement

The prototypes for these board (V1.0 and V1.1) were financed by the computer architecture lab of EPFL. Version V1.2 and the CPU-addon was financed by the HuCE-microlab of BFH.

Parts

17
QtyValueFootprintReferences
42EResistor_SMD:R_0402_1005MetricR1, R2, R3, R4
3SW_PushaddOnTemplate:pushbuttonSW1, SW2, SW3
210pFCapacitor_SMD:C_0402_1005MetricC1, C2
1100nFCapacitor_SMD:C_0402_1005MetricC3
120kResistor_SMD:R_0402_1005MetricR5
162684-402100ALFmseAddOn:CONN_62684-402100ALF_AMPJ2
1AR1021-I/SSaddOnTemplate:SSOP20_MC_MCHU1
1QTE-020-01-F-D-AaddOnTemplate:SAMTEC_QTE-020-01-X-D-AJ1

The 14 most common of 17 parts.

More from logisim-evolution/GECKO5Education

5
  • 6 layers60.6 × 100 mmGecko5education, the printed circuit board in 3D

    Gecko5education

    logisim-evolution/GECKO5Education

    Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education

    311 parts18MIT
  • 6 layers60.6 × 100 mmCpuAddOn, the printed circuit board in 3D

    CpuAddOn

    logisim-evolution/GECKO5Education

    Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education

    141 parts18MIT
  • 2 layers97.4 × 53.3 mmAddOnTemplate, the printed circuit board in 3D

    AddOnTemplate

    logisim-evolution/GECKO5Education

    Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education

    84 parts18MIT
  • 4 layers60.6 × 75.2 mmPerifAddOn, the printed circuit board in 3D

    PerifAddOn

    logisim-evolution/GECKO5Education

    Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education

    71 parts18MIT
  • 2 layers60.6 × 100 mmAddOnTemplate, the printed circuit board in 3D

    AddOnTemplate

    logisim-evolution/GECKO5Education

    Openhardware educational platform based on the ideas of the ulx3s and Gecko4Education

    4 parts18MIT

Similar boards

  • 6 layers60.6 × 100 mmVisionAddOn, the printed circuit board in 3D

    VisionAddOn

    TobiasJaeggi/fpga-mocap

    FPGA based Motion Capture

    195 parts1GPL-3.0
  • 4 layers65.6 × 41.4 mmPicopocket, the printed circuit board in 3D

    Picopocket

    korneliuszo/picopocket-hw

    Addon for Pocket386 based on rpi pico w

    88 parts11
  • 2 layers175.3 × 95.3 mmLCD PMOD, the printed circuit board in 3D

    LCD PMOD

    goran-mahovlic/LVDS_RGB_experimental

    174 parts5
  • 2 layersDS90CF364, the printed circuit board in 3D

    DS90CF364

    goran-mahovlic/ulx3s-extensions

    PMOD boards for ULX3S

    34 parts49
  • 2 layers460.9 × 228.8 mmDC-34-Badge panel, the printed circuit board in 3D

    DC-34-Badge panel

    Cyber-Professionals-Enthusiast-Club/DC-34-Badge

    CPEC Badge Kicad design files for DEFCON 34

    276 parts3
  • 2 layers60 × 75 mmReadout BoardV1, the printed circuit board in 3D

    Readout BoardV1

    zademahi238/mission-mimosa

    To answer this, we compare task-completion success rates with and without tactile sensing across different robot-learning policies.

    31 parts2
  • 6 layers255 × 147 mmKule pcb, the printed circuit board in 3D

    Kule pcb

    Kule-Racing-Spill/kule-pcb

    This repo contains the PCB design files

    168 parts

Questions

How big is the MseAddOn PCB?

It measures 60.6 × 100 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MseAddOn use?

17 parts, built around the AR1021-I/SS, 62684-402100ALF and QTE-020-01-F-D-A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MseAddOn KiCad files?

From the logisim-evolution/GECKO5Education repository on GitHub, at the commit this page was made from: the board is kicad/lcdAddOn/mseAddOn.kicad_pcb and its schematic kicad/GECKO5Education/gecko5education.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MseAddOn design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).