Skip to the content
2 layers50 × 70 mmStacklight Controller, the printed circuit board in 3D

Stacklight Controller

lmtreser/mecanica

Repositorio educativo de modelos 3D, en general dispositivos o artilugios mecánicos para vincular con electrónica

Size
50 × 70 mm
Copper layers
2
Thickness
1.58 mm
Parts
47
Nets
39
Pads
142
Tracks, vias
330, 64
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
23 Nov 2023
Updated
4 Nov 2026

Overview

Stacklight Controller is an open-source printed circuit board by lmtreser, from the lmtreser/mecanica repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 70 mm with 47 parts on 39 nets, routed with 330 tracks and 64 vias.

It is built around the PCA9554PW, 1N4148WS and DMP3098L-7-ES. Its parts include 15 resistors, 5 diodes, 5 transistors, 5 connectors and 4 switches.

Main components

3

README

README.md

Dispositivos mecánicos

Colección de dispositivos y artilugios mecánicos para vincular con electrónica.

La mayoría de los diseños fueron descargados desde el sitio web Thingiverse. Lea los archivos README.txt respectivos para más detalles.

Modelos 3D

  • Archimedes screw tornillo de Arquímedes para mover sólidos.
  • DIN rail/Arduino DIN rail clip & bumper montaje en riel DIN para placa Arduino UNO.
  • DIN rail/Din Rail for mega 2560 montaje en riel DIN para placa Arduino MEGA 2560.
  • DIN rail/DIN-Rail Mount for Arduino Mega 2560 montaje en riel DIN para placa Arduino MEGA 2560.
  • DIN rail/ESP32 Lolin Din rail mount montaje en riel DIN para placa ESP32 Lolin.
  • DIN rail/ESP8266 V3 vertical DIN rail montaje en riel DIN para placa NodeMCU ESP8266.
  • Pilas 18650 portapilas desde 1 a 4 pilas recargables modelo 18650.
  • Roller Blind mecanismos para cortina de enrollar motorizada.
  • Suspension Servo mecanismo de suspensión y dirección delantera para robótica.
  • Tolva Servo SG90 tolva dosificadora de sólidos con servo modelo SG90.

Ánexos Técnicos

  • Agujeros.pdf Tabla diámetro de agujero a roscar, tipos de machos.
  • Catálogo_Bulones.pdf Catálogo bulones, arandelas, tuercas, tornillos, espárragos y varillas.
  • Riel DIN.pdf Breve apunte sobre el riel DIN.
  • Tipos de roscas.pdf Tabla tipos de roscas.

Objetos

Colección de objetos, componentes y dispositivos útiles para la confección de sistemas.

Parts

47
QtyValueFootprintReferences
60Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9, R10, R11, R12, R13, R14
610kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR3, R4, R5, R6, R7, R8
41N4148WSDiode_SMD:D_SOD-323_HandSolderingD1, D2, D3, D4
42N7002Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4
4G5V-1Relay_THT:Relay_SPDT_Omron_G5V-1K1, K2, K3, K4
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
2100Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2Conn_01x08Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ3, J5
11.5kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR15
1100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1
11uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC2
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ4
1DMP3098L-7Package_TO_SOT_SMD:SOT-23_HandsolderingQ5
1GreenLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD5
1Jumper_2_OpenConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1PCA9554PWPackage_SO:TSSOP-16_4.4x5mm_P0.65mmU1
1Phoenix Contact PTSA 1,5/8-3,5-F0_Local_Library:Phoenix_PTSA_1,5_8-3,5-FJ1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP3
1SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1WAGO 2091-13560_Local_Library:WAGO_2091-1356J2

The 44 most common of 47 parts.

Similar boards

  • 4 layers80 × 87.6 mmAratMicro, the printed circuit board in 3D

    AratMicro

    vorlaxen-labs/AratMicro

    High-performance, open-source micromouse robot platform built for Robosam and MEB Robot (Ministry of National Education Robotics Competition, Turkey).

    110 parts1MIT
  • 2 layers43.2 × 43.2 mmSparkFun Portability Shield, the printed circuit board in 3D

    SparkFun Portability Shield

    sparkfun/SparkFun_Portability_Shield

    A small board that adds a display, navigation, logging, and battery management.

    103 parts
  • 2 layers25.4 × 25.4 mmSparkFun Qwiic Directional Pad, the printed circuit board in 3D

    SparkFun Qwiic Directional Pad

    embeddedos-org/eCAD-Hardware-Products

    Hardware designs + EE docs + Board datasheets of Multiple products

    69 parts8MIT
  • 4 layers62.8 × 97.5 mmOceanAI, the printed circuit board in 3D

    OceanAI

    daniel360kim/OceanAI

    A robotic and software orientated ocean development.

    124 parts14MIT
  • 4 layers81 × 37 mmMaidenhead pocket locator, the printed circuit board in 3D

    Maidenhead pocket locator

    EdmundLimBoEn/gps-maidenhead-device

    Open-source portable GNSS Maidenhead grid locator with a 16x2 LCD

    117 parts
  • 4 layers50.8 × 81.3 mmAllfc, the printed circuit board in 3D

    Allfc

    peregrine-developments/STACY

    153 parts6MIT
  • 8 layersFIRM v1.1, the printed circuit board in 3D

    FIRM v1.1

    NCSU-High-Powered-Rocketry-Club/FIRM-KiCad

    Full and open hardware design for FIRM

    108 parts1MIT
  • 2 layers62.7 × 76.4 mmRP2DV Beanz, the printed circuit board in 3D

    RP2DV Beanz

    BrainBoardz/BrainBoardz

    The Repository for All Things BrainBoardz Related

    133 partsGPL-3.0

Questions

How big is the Stacklight Controller PCB?

It measures 50 × 70 mm and has 2 copper layers, 1.58 mm thick.

What parts does the Stacklight Controller use?

47 parts, built around the PCA9554PW, 1N4148WS and DMP3098L-7-ES. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stacklight Controller KiCad files?

From the lmtreser/mecanica repository on GitHub, at the commit this page was made from: the board is Modelos 3D/Stack Lights/Stacklight-Controller/Stacklight-Controller.kicad_pcb and its schematic Modelos 3D/Stack Lights/Stacklight-Controller/Stacklight-Controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stacklight Controller design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).