2 layers100 × 100 mm
Dual encoder controller
Llamero/Dual_encoder_controller
Dual encoder controller for hyperspectral display
12 partsApache-2.0
2 layers100 × 100 mm
Dual encoder controller - left
Llamero/Dual_encoder_controllerDual encoder controller for hyperspectral display
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 8
- Pads
- 32
- Tracks, vias
- 105, 358
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 10 Aug 2024
- Updated
- 10 Apr 2025
Overview
Dual encoder controller - left is an open-source printed circuit board by Llamero, from the Llamero/Dual_encoder_controller repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 100 × 100 mm with 7 parts on 8 nets, routed with 105 tracks and 358 vias.
It is built around the B3J-3300. Its parts include 1 capacitor, 1 resistor, 1 connector and 1 switch. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 8P8C_Shielded | Custom footprints:ASSMANN_A-2004-2-4-LPS-N-R | J1 |
| 1 | B3J-3300 | Custom footprints:B3J-3300 | SW1 |
| 1 | CC license | Custom Footprints:Creative_commons_license | LOGO1 |
| 1 | C_Small | Capacitor_THT:C_Rect_L4.0mm_W2.5mm_P2.50mm | C1 |
| 1 | EM14 Encoder | Custom footprints:EM14R0B-M25-L064S | EN1 |
| 1 | OSHW Logo | Symbol:OSHW-Logo2_7.3x6mm_SilkScreen | LOGO3 |
Questions
How big is the Dual encoder controller - left PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Dual encoder controller - left use?
7 parts, built around the B3J-3300. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Dual encoder controller - left KiCad files?
From the Llamero/Dual_encoder_controller repository on GitHub, at the commit this page was made from: the board is KiCAD/Dual encoder controller - left.kicad_pcb and its schematic KiCAD/Dual encoder controller - left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Dual encoder controller - left design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Llamero/Dual_encoder_controller
1Similar boards
- 2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT - 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
