

666katy
68katy-based board. *Not verified to work*
- Size
- 128 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 63
- Nets
- 94
- Pads
- 413
- Tracks, vias
- 1,815, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Nov 2016
- Updated
- 12 Nov 2016
Overview
666katy is an open-source printed circuit board by lkundrak, from the lkundrak/666katy repository on GitHub. It is a 2-layer board of 128 × 95 mm with 63 parts on 94 nets, routed with 1,815 tracks and 38 vias.
It is built around the 74LS32SC, 74HC74D and 74LS04PC, with the 74LS10PC, 74LS11DC and 74LS139PC among its other parts. Its parts include 20 capacitors, 16 ICs, 13 resistors, 8 diodes and 3 connectors.
Main components
974LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic Gates74HC74D
SOIC-14-40℃~+125℃ 1 15ns 2 2V~6V 3.5pF 37ns@6V,50pF 3ns、3ns、3ns 40uA 5.2mA 5.2mA 74HC Series 82MHz Asynchronous Complementary D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSNexperiaFlip Flops74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters74LS10PC
PDIP-140℃~+70℃ 3 3.3mA 4.75V~5.25V 74LS Series NAND Gate PDIP-14 Logic GatesonsemiLogic Gates74LS11DC
CDIP-140℃~+70℃ 18ns@5V,50pF 2V 3 4.5V~5.5V 400uA 6.6mA 74LS Series 800mV 8mA AND Gate CDIP-14 Logic GatesTexas InstrumentsLogic Gates74LS139PC
PDIP-1622ns 74LS 8mA Decoder Single Supply PDIP-16 Signal Switches, Multiplexers, DecodersonsemiSignal Switches, Multiplexers, Decoders74LS21PC
DIP-140℃~+70℃ 18ns@5V,50pF 2 2.7V~3.4V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA AND Gate DIP-14 Logic Gates ROHSonsemiLogic Gates74LS377PC
PDIP-200℃~+70℃ 1 10ns 25ns@5V,15pF 28mA 30MHz 4.75V~5.25V 400uA 5ns 74LS Series 8 8mA D-Type Rising Edge Synchronous PDIP-20 Flip Flops ROHSTexas InstrumentsFlip FlopsLM555N
DIP-80℃~+70℃ 4.5V~16V DIP-8 555 Timers / Counters ROHSHGSEMITimers / Counters
Parts
63| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | 0.1 uF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C5, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 |
| 8 | 330 | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R5, R6, R7, R8, R9, R10, R11, R12 |
| 8 | Led_Small | LEDs:LED-5MM | D1, D2, D3, D4, D5, D6, D7, D8 |
| 4 | 10 k | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R1, R2, R3, R4 |
| 2 | 1 uF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C3, C4 |
| 2 | 74LS32 | Housings_DIP:DIP-14_W7.62mm | U5, U10 |
| 1 | 0.47 uF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C2 |
| 1 | 10 K | Resistors_ThroughHole:Resistor_Horizontal_RM10mm | R13 |
| 1 | 100 pF | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C1 |
| 1 | 12 MHz | Oscillators:OSC_DIP8 | X1 |
| 1 | 29W040 | Housings_DIP:DIP-32_W15.24mm | U2 |
| 1 | 68008D | Housings_DIP:DIP-48_W15.24mm | U12 |
| 1 | 7400 | Housings_DIP:DIP-14_W7.62mm | U8 |
| 1 | 74HC74 | Housings_DIP:DIP-14_W7.62mm | U7 |
| 1 | 74LS04 | Housings_DIP:DIP-14_W7.62mm | U1 |
| 1 | 74LS08 | Housings_DIP:DIP-14_W7.62mm | U9 |
| 1 | 74LS10 | Housings_DIP:DIP-14_W7.62mm | U13 |
| 1 | 74LS11 | Housings_DIP:DIP-14_W7.62mm | U6 |
| 1 | 74LS139 | Housings_DIP:DIP-16_W7.62mm | U4 |
| 1 | 74LS21 | Housings_DIP:DIP-14_W7.62mm | U14 |
| 1 | 74LS244 | Housings_DIP:DIP-20_W7.62mm | U16 |
| 1 | 74LS377 | Housings_DIP:DIP-20_W7.62mm | U11 |
| 1 | BARREL_JACK | Connect:BARREL_JACK | CON1 |
| 1 | FT24RL JP1 | Pin_Headers:Pin_Header_Straight_1x09 | P1 |
| 1 | FT24RL JP2 | Pin_Headers:Pin_Header_Straight_1x09 | P2 |
| 1 | HALT | Buttons_Switches_ThroughHole:SW_PUSH | SW1 |
| 1 | LM555N | Housings_DIP:DIP-8_W7.62mm | U3 |
| 1 | RESET | Buttons_Switches_ThroughHole:SW_PUSH | SW2 |
| 1 | SRAM_512Ko | Housings_DIP:DIP-32_W15.24mm | U15 |
Similar boards
- 2 layers

- 2 layers476.5 × 299.5 mm

- 2 layers295 × 195 mm

- 2 layers279.9 × 76.1 mm

AmdekDVM
schlae/AmdekDVM
Reverse engineering Amdek DVM video card for the Apple II
69 parts4CERN-OHL-P-2.0 - 2 layers206.4 × 137.5 mm

- 2 layers364 × 203 mm

- 2 layers182 × 138.8 mm

-816-board
snippyrow/-816-board
A retro computer motherboard for the W65C816S CPU. Dual-core expandable, 16mb extended memory, four expansion ports.
141 partsMIT - 2 layers630 × 300 mm

Questions
How big is the 666katy PCB?
It measures 128 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 666katy use?
63 parts, built around the 74LS32SC, 74HC74D, 74LS04PC and 74LS10PC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 666katy KiCad files?
From the lkundrak/666katy repository on GitHub, at the commit this page was made from: the board is 666katy.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 666katy design in my own project?
Its repository states no licence, so its author keeps all rights: ask lkundrak before reusing the design.