

Driver seperate
Schematics etc.
- Size
- 37.8 × 34.2 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 27
- Pads
- 89
- Tracks, vias
- 183, 53
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 8 Dec 2023
- Updated
- 2 Nov 2026
Overview
Driver seperate is an open-source printed circuit board by LiU-SeeGoals, from the LiU-SeeGoals/Electronics repository on GitHub. It is a 4-layer board of 37.8 × 34.2 mm with 21 parts on 27 nets, routed with 183 tracks and 53 vias.
It is built around the MCT8316Z0TQRGFRQ1 and KCM55TR71H226MH01L. Its parts include 7 capacitors, 7 resistors, 3 connectors, 1 IC and 1 inductor.
Main components
2MCT8316Z0TQRGFRQ1
VQFN-40(5x7)-40℃~+125℃ 1.5uA 3 8A 8A 95mΩ SPI Three Phase Yes VQFN-40(5x7) Brushless DC (BLDC) Motor Driver ROHSTexas InstrumentsBrushless DC (BLDC) Motor DriverKCM55TR71H226MH01L
SMD,6.1x5.3mm22uF 50V X7R ±20% SMD,6.1x5.3mm Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.mdElectronics
Schematics etc.
Motor driver
The motor driver has 5 important pins,
Motor driver has 5 pins to the devboard, 2 power pins and 8 pins to the motor
The important pins are
PWM, - Takes PWM signal to decide speed of motor, generate from devboard with timers.
FGOUT, - Hall sensor tick output, work like a wheel encoder and ticking as the motor spins so that we know how much the motor has spun.
nFault, - Gives fault messages when fault states are entered by going low. Currently does not work, set this pin HIGH 5v or motor driver can enter test mode.
brake - HIGH sets all motor coils high breaking the motor hard.
dir - Decides direction for motorMotor driver improvements
Capacitors and components change capacitance, inductance, etc as the voltage changes. This was not know during the making of driver.
Capacitors should be closer to the pins they are filtering.
There is a risk of overheating if the motors get stuck for a longer time, adding some cooling would be nice.
Getting started
Add the .pretty library file to get footprints from lib/
Using kicad: preferences -> Manage footprint libraries
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0u1F | Capacitor_SMD:C_0805_2012Metric | C1, C4 |
| 2 | 1uF | SamacSys_Parts:CAPC3216X178N | C3, C7 |
| 2 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 47k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6 |
| 1 | 47nF | SamacSys_Parts:CAPC3216X180N | C2 |
| 1 | 47uH | SamacSys_Parts:INDPM7973X540N | L1 |
| 1 | Conn_01x02 | Connector_Molex:Molex_KK-396_5273-02A_1x02_P3.96mm_Vertical | J4 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3 |
| 1 | KCM55TR71H226MH01L | SamacSys_Parts:CAPC6153X500N | C5 |
| 1 | MCT8316Z0TQRGFRQ1 | SamacSys_Parts:QFN50P500X700X100-41N-D | IC1 |
| 1 | Motor | Connector_Molex:Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical | J2 |
More from LiU-SeeGoals/Electronics
7- 4 layers

- 4 layers70 × 95 mm

- 4 layers37.8 × 34.2 mm

- 4 layers

- 2 layers44 × 37.8 mm

- 4 layers25.4 × 21 mm

- 2 layers24 × 15.5 mm

Similar boards
- 4 layers26.7 × 21.9 mm

Buck Converter
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
21 parts192MIT - 4 layers26 × 30 mm

Day 01 Wi Fi Halow
i2cjak/Framework_Expansion_Cards
In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop
21 parts95CERN-OHL-P-2.0 - 4 layers20 × 48.5 mm

Midea WiFi Dongle
reneklootwijk/mideahvac-dongle
This repository contains the hardware design of a WiFi dongle for Midea-like airconditioners and humidifiers. Midea provides a WiFi dongle (SK102/SK103), either as optional feature or built-in, to control the appliances…
21 parts75 - 4 layers80 × 80 mm

- 4 layers90 × 75 mm

- 4 layers

Tiav3
OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging
21 parts44 - 4 layers51.5 × 41.4 mm

- 4 layers88.9 × 20.3 mm

Questions
How big is the Driver seperate PCB?
It measures 37.8 × 34.2 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Driver seperate use?
21 parts, built around the MCT8316Z0TQRGFRQ1 and KCM55TR71H226MH01L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Driver seperate KiCad files?
From the LiU-SeeGoals/Electronics repository on GitHub, at the commit this page was made from: the board is driver-pcb/driver_seperate/driver_seperate-backups/driver_seperate.kicad_pcb and its schematic devboard_v1/devboard_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Driver seperate design in my own project?
Its repository states no licence, so its author keeps all rights: ask LiU-SeeGoals before reusing the design.