2 layers58 × 58 mm
2 layers58.3 × 98.6 mm
Scythe badge
linted/opensource-hardware2Hardware creations for the masses
- Size
- 58.3 × 98.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 36
- Pads
- 83
- Tracks, vias
- 352, 0
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Aug 2020
- Updated
- 7 Aug 2020
Overview
Scythe badge is an open-source printed circuit board by linted, from the linted/opensource-hardware repository on GitHub. It is a 2-layer board of 58.3 × 98.6 mm with 29 parts on 36 nets, routed with 352 tracks and 0 vias.
It is built around the ATTINY1604-SSF. Its parts include 18 resistors, 6 diodes, 1 capacitor, 1 IC and 1 connector. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdopensource-hardware
Hardware creations for the masses
These files are under no warenty.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | R | Resistors_SMD:R_0603 | R1, R2, R3, R4, R5, R6, R7, R10, R11, R12, R13, R14, R16, R17, R19, R20 +2 |
| 6 | LED_ABRG | footprint:E6C1204RGBC3UDA | D1, D2, D3, D4, D5, D6 |
| 1 | ATtiny1604-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Badgelife_sao_connector_v169bis | badgelife_sao_v169bis:Badgelife-SAOv169-SAO-2x3 | X1 |
| 1 | C | Capacitors_SMD:C_1206 | C1 |
| 1 | Conn_01x01 | rgbled:conn_01x01 | J1 |
| 1 | Val** | footprint:scythe_badge | Ref** |
Questions
How big is the Scythe badge PCB?
It measures 58.3 × 98.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Scythe badge use?
29 parts, built around the ATTINY1604-SSF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Scythe badge KiCad files?
From the linted/opensource-hardware repository on GitHub, at the commit this page was made from: the board is scythe_badge/scythe_badge.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Scythe badge design in my own project?
Its repository states no licence, so its author keeps all rights: ask linted before reusing the design.
Similar boards
- 2 layers60 × 100 mm
- 2 layers19.8 × 17.8 mm
- 4 layers40 × 27 mm
- 2 layers50 × 40.9 mm
GR ATTiny LFO
GadgetReboot/ATTiny_LFO
Dual low frequency oscillators using ATTiny and MCP4725 DACs
36 parts3 - 2 layers77.2 × 50.3 mm
- 2 layers100 × 90 mm
- 2 layers61 × 74 mm
Gimbal
Alan-JH/Tiny-Gimbal
Code and pcb for self stabilizing servo gimbal using BNO055 and ATTiny1624 for TJUAV
23 parts1