
Ris-26 igniter v8 pcb v4
linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

Remote Igniting System 26, Avionics, ISP, NCKU
Ris-26 igniter v8 is an open-source printed circuit board by linkkwisteria-droid, from the linkkwisteria-droid/ris-26 repository on GitHub. It is a 2-layer board of 50 × 50 mm with 45 parts on 32 nets, routed with 213 tracks and 31 vias.
It is built around the 74HC08D-TD, FDD8896 and MMBT2222A. Its parts include 19 resistors, 7 ICs, 5 diodes, 4 capacitors and 4 transistors.
Info
- Author: 林冠宏
- Built Date: 2026-07-08
- Summary: 一個RIS-26專案的README.md檔案,路徑為 "ris-26/"。
RIS-26,全名為 "Remote Ignition System 26,是 NCKUISP航電組 在 2026-01 開始的專案,主要負責人為 林冠宏,此專案目標為製造一個遙控點火系統。
ris-26
├─doc # 文件
├─draw-io # draw.io 網站的檔案
├─kicad # kicad 檔案,依照子系統分類
├─ltspice # SPICE 模擬軟體 LTSPICE
├─solidwork # 3D CAD
└─vscode # vscode 檔案,依照子系統分類修碰
| No. | Name | |
|---|---|---|
| 01 | 林冠宏 | linkk.wisteria@gmail.com |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | ris-26_footprint_lib:R_0603_1608_CUS | R1, R3, R6, R8, R9, R11, R13, R14, R16, R19 |
| 5 | LED | ris-26_footprint_lib:LED_0603_1608_CUS | D1, D2, D3, D4, D5 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H3, H4 |
| 3 | 20k | ris-26_footprint_lib:R_0603_1608_CUS | R15, R17, R18 |
| 3 | 22 | ris-26_footprint_lib:R_0603_1608_CUS | R2, R7, R12 |
| 3 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4 |
| 2 | 74AHC1G04SE-7 | ris-26_footprint_lib:SOT65P210X110-5N | U5, U7 |
| 2 | FDD8896 | ris-26_footprint_lib:TO-252-2_CUS | Q1, Q4 |
| 1 | 180 | ris-26_footprint_lib:R_0603_1608_CUS | R10 |
| 1 | 1k | ris-26_footprint_lib:R_0603_1608_CUS | R5 |
| 1 | 2SJ239 | ris-26_footprint_lib:TO-252-2_CUS | Q3 |
| 1 | 300 | ris-26_footprint_lib:R_0603_1608_CUS | R4 |
| 1 | 3300uF/16V | ris-26_footprint_lib:CP_Radial_D12.5mm_P7.50mm_CUS | C1 |
| 1 | 74HC08D-T | ris-26_footprint_lib:SOIC127P600X175-14N | U6 |
| 1 | IGNITER_XT30 | Connector_AMASS:AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | ris-26_footprint_lib:qrcode | G*** |
| 1 | MANUAL_XT30 | Connector_AMASS:AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | U2 |
| 1 | MCU_CAP_JST | Connector_JST:JST_EH_B7B-EH-A_1x07_P2.50mm_Vertical | U4 |
| 1 | MMBT2222A | ris-26_footprint_lib:TSOT-23_HandSoldering | Q2 |
| 1 | POWER | Connector_AMASS:AMASS_XT30UPB-F_1x02_P5.0mm_Vertical | U1 |

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU




linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU


linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU



Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…

ElectronicCats/Minino
Minino is an original multiprotocol and multiband board made for sniffing, communicating, and attacking IoT devices. It was designed as a mini Cat that integrates the powerful ESP32C6, GPS, microSD and OLED.

LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller

atomic14/ch32v003-audio
A collection of audio projects for the CH32V003J4M6 RISC-V microcontroller, demonstrating various audio synthesis and playback techniques on an 8-pin, $0.10 microcontroller.

HandHeldLegend/GC-Ultimate
The 3D shell, buttons, and other associated models are licensed under a Creative Commons Attribution 4.0 International License .

onionharvester/boardwalk
A little gathering place for my PCBs. This is their favourite hangout spot! 🪼⋆.ೃ࿔*:・

It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the 74HC08D-TD, FDD8896 and MMBT2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the linkkwisteria-droid/ris-26 repository on GitHub, at the commit this page was made from: the board is kicad/igniter/ris-26_igniter_v8/ris-26_igniter_v8.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask linkkwisteria-droid before reusing the design.