
Ris-26 igniter v8 pcb v4
linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

Remote Igniting System 26, Avionics, ISP, NCKU
Ris-26 console v5 is an open-source printed circuit board by linkkwisteria-droid, from the linkkwisteria-droid/ris-26 repository on GitHub. It is a 2-layer board of 150 × 50 mm with 25 parts on 55 nets, routed with 188 tracks and 12 vias.
It is built around the NODEMCU-32SLUA, RA-02 and SB520. Its parts include 7 resistors, 6 ICs, 5 transistors, 4 capacitors and 1 diode. It belongs with the ESP8266 boards of this library.
Info
- Author: 林冠宏
- Built Date: 2026-07-08
- Summary: 一個RIS-26專案的README.md檔案,路徑為 "ris-26/"。
RIS-26,全名為 "Remote Ignition System 26,是 NCKUISP航電組 在 2026-01 開始的專案,主要負責人為 林冠宏,此專案目標為製造一個遙控點火系統。
ris-26
├─doc # 文件
├─draw-io # draw.io 網站的檔案
├─kicad # kicad 檔案,依照子系統分類
├─ltspice # SPICE 模擬軟體 LTSPICE
├─solidwork # 3D CAD
└─vscode # vscode 檔案,依照子系統分類修碰
| No. | Name | |
|---|---|---|
| 01 | 林冠宏 | linkk.wisteria@gmail.com |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | NMOS | ris-26_footprint_lib:TO-220 | Q1, Q2, Q3, Q4 |
| 2 | 560uF/25V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2 |
| 2 | 75 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 1 | 0.1uF | ris-26_footprint_lib:CERAMIC_C_PIN | C3 |
| 1 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 240 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 1 | 27uF/16V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 3.3K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | Buzzer | RIC2026_0_custom_library:TMB12A03_BUZZER | BZ1 |
| 1 | DISPLAY_JST | Connector_JST:JST_EH_S8B-EH_1x08_P2.50mm_Horizontal | U2 |
| 1 | HCM0630-220M | ris-26_footprint_lib:HCM0630 | L1 |
| 1 | LM2596S-5.0/NOPB | ris-26_footprint_lib:TO170P1524X483-6N | U4 |
| 1 | NODEMCU-32S | ris-26_footprint_lib:NODEMCU-32S_PIN | U1 |
| 1 | NPN_9013 | ris-26_footprint_lib:SOT95P237X125-3N | Q5 |
| 1 | PANEL_JST | Connector_JST:JST_EH_S5B-EH_1x05_P2.50mm_Horizontal | U3 |
| 1 | RA-02 | ris-26_footprint_lib:RA-02 | U5 |
| 1 | SB520 | ris-26_footprint_lib:P2_DO-201 | D1 |
| 1 | ~ | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | U6 |

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU




linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU


linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU

linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU


linkkwisteria-droid/ris-26
Remote Igniting System 26, Avionics, ISP, NCKU



plb500/AutoBloomer-SensorModules
Code and PCB designs for AutoBloomer MQTT sensor modules


mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers

victorstoica114/ESP32-C3_Radio
PlatformIO project for testing multiple radio modules with an ESP32-C3 board, an optional SSD1306 OLED display, and serial/AT-command based firmware variants.

bogdan-kovalchuk/esp32-battery-charging-monitoring
An ESP32-based 12 V battery voltage monitor. The firmware measures battery voltage, while a Flask backend delivers notifications to a Signal group through signal-cli.
bogdan-kovalchuk/esp32-lora-gps-tracker
Encrypted point-to-point GPS telemetry over 433 MHz LoRa between two ESP32 boards.

Glebka/ARS
My first project based on the STM32 microcontroller family. It consists of an alarm module and a receiver. The alarm module utilizes the RCWL-0516 motion sensor, the STM32F030K6T6 microcontroller, which wakes up upon…
It measures 150 × 50 mm and has 2 copper layers, 1.6 mm thick.
25 parts, built around the NODEMCU-32SLUA, RA-02 and SB520. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the linkkwisteria-droid/ris-26 repository on GitHub, at the commit this page was made from: the board is kicad/console/ris-26_console_v5/ris-26_console_v5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask linkkwisteria-droid before reusing the design.