2 layers78 × 90 mm
Multicart
trwgQ26xxx/FLT_ART_CU1_Multicart
Multicart for Fiat Lancia Tester\Alfa Romeo Tester\Check Up 1
44 parts
2 layers90 × 95 mm
Xt60 parallelizer
limpkin/xt60_parallelizer16a custom board to monitor custom battery packs
- Size
- 90 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 57
- Nets
- 76
- Pads
- 243
- Tracks, vias
- 408, 166
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 25 Mar 2024
- Updated
- 26 May 2024
Overview
Xt60 parallelizer is an open-source printed circuit board by limpkin, from the limpkin/xt60_parallelizer repository on GitHub, published under the MIT licence. It is a 2-layer board of 90 × 95 mm with 57 parts on 76 nets, routed with 408 tracks and 166 vias.
It is built around the ATTINY806-SF, PCA8561BHN/AY and CPC1017N. Its parts include 16 capacitors, 12 resistors, 11 ICs, 5 fuses and 3 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3
ATTINY806-SF
SOIC-20-300mil-40℃~+125℃ 10bit 128Byte 16MHz 18 1KB 2.7V~5.5V 8 Bit 8KB AVR Built-in FLASH SOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
PCA8561BHN/AY
HVQFN-32-EP(5x5)HVQFN-32-EP(5x5) LCD Drivers ROHSNXP SemiconductorsLCD Drivers
CPC1017N
SOP-4-2.54mm1.2V 1.5kV 100mA 10ms 10ms 16Ω 60V One set normally open: 2A (SPST - normally open) SOP-4-2.54mm Solid State Relays (MOS Output) ROHSLittelfuse/IXYSSolid State Relays (MOS Output)
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4, C11, C12, C14, C15 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5, R6, R7, R8, R10, R12 |
| 7 | 22uF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C8, C9, C10, C13, C16 |
| 4 | Battery_Cell | lib:XT60 | BT1, BT2, BT3, BT4 |
| 4 | Fuse | Fuse:Fuseholder_Clip-5x20mm_Keystone_3517_Inline_P23.11x6.76mm_D1.70mm_Horizontal | F1, F2, F3, F4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | TMCS1108-Q1 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4 |
| 3 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R2, R9 |
| 2 | CPC1017N | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | U6, U7 |
| 1 | NCP163ASN330T1G | Package_TO_SOT_SMD:SOT-23-5 | U8 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 10uF | Capacitor_SMD:C_1210_3225Metric | C5 |
| 1 | ATtiny806-S | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U10 |
| 1 | AVR-UPDI-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Buzzer | lib:9042_ACTIVE_BUZZER | BZ1 |
| 1 | Conn_01x02_Pin | lib:XT60 | J3 |
| 1 | Conn_01x07_Socket | lib:PhoenixContact_PTSA_1x07_P3.5mm_Horizontal | J1 |
| 1 | K78U05-500R3 | lib:SIP3_11.6x8.5mm_INV | U5 |
| 1 | PCA8561BHN | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm | U9 |
| 1 | Polyfuse_Small | Fuse:Fuse_1812_4532Metric | F5 |
| 1 | SW_DIP_x04 | lib:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | TN Display | lib:8DIGITS_TN | U11 |
Questions
How big is the Xt60 parallelizer PCB?
It measures 90 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Xt60 parallelizer use?
57 parts, built around the ATTINY806-SF, PCA8561BHN/AY and CPC1017N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xt60 parallelizer KiCad files?
From the limpkin/xt60_parallelizer repository on GitHub, at the commit this page was made from: the board is kicad/xt60_parallelizer.kicad_pcb and its schematic kicad/xt60_channel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xt60 parallelizer design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers161.3 × 88.5 mm
- 2 layers
GCAN gauge
willemcvu/gCAN-gauge
An open-source ESP32-based programmable digital gauge targeted at EV conversions
49 parts4MIT - 4 layers100 × 100 mm
AFE
Blaze-Pascal/Masters-Multi-Channel_DAQ
Custom 2-channel digital oscilloscope DAQ with 20MHz bandwidth. Built with a custom KiCad analog front-end (AFE) PCB, Gowin FPGA (Tang Nano 9K) for high-speed signal buffering (VHDL), and an RPi Pico MCU for SCPI-like…
216 parts2GPL-3.0 - 4 layers67 × 157 mm
- 6 layers56.7 × 54.7 mm
Better md80
darshp848/bldc-controller-60v
60 V, 20 A / 80 A peak BLDC motor controller that fits the MD80 v3.0 mounting. KiCad 10, 6 layers.
144 parts1 - 4 layers100 × 100 mm
- 2 layers69.9 × 33 mm
