Skip to the content
2 layers12.1 × 23.5 mmSGP41, the printed circuit board in 3D
Size
12.1 × 23.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
16
Nets
15
Pads
44
Tracks, vias
84, 1
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
30 Jun 2024
Updated
7 Jul 2024

Overview

SGP41 is an open-source printed circuit board by lilylab-dev, from the lilylab-dev/sgwdaughterboards repository on GitHub. It is a 2-layer board of 12.1 × 23.5 mm with 16 parts on 15 nets, routed with 84 tracks and 1 via.

It is built around the SGP41-D-R4. Its parts include 5 resistors, 4 capacitors, 2 ICs, 2 connectors and 1 inductor.

Main components

1

Parts

16
QtyValueFootprintReferences
210uFCapacitor_SMD:C_0805_2012Metric100nF1, C1
222uFCapacitor_SMD:C_0805_2012MetricC2, C3
2R_SmallResistor_SMD:R_0805_2012MetricR4, R5
110kResistor_SMD:R_0805_2012MetricR2
11uFCapacitor_SMD:C_0805_2012MetricC4
12.2uHInductor_SMD:L_0805_2012MetricL1
131.6kResistor_SMD:R_0805_2012MetricR1
14.7Resistor_SMD:R_0805_2012MetricR3
1AP62250WU-7asd:TSOT26STANDARD_DIOU3
1C_SmallCapacitor_SMD:C_0805_2012MetricC5
1Conn_01x03Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_VerticalJ1
1Conn_01x04Connector:NS-Tech_Grove_1x04_P2mm_VerticalJ2
1SGP41-D-R4asd:DFN_SGP41-D-R4_SENU1

More from lilylab-dev/sgwdaughterboards

1
  • 2 layers12.6 × 26.6 mmBME688, the printed circuit board in 3D

    BME688

    lilylab-dev/sgwdaughterboards

    21 parts

Similar boards

  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT
  • 4 layers75 × 56.4 mmEsp32-c6-wroom1 board, the printed circuit board in 3D

    Esp32-c6-wroom1 board

    pushtiujeniya/esp32-c6-environmental-logger

    This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.

    59 parts4
  • 2 layers40 × 98 mmAirquality, the printed circuit board in 3D

    Airquality

    LukasLendvorsky/airquallity-esphome

    WIFI airquality sensor with ESP32

    59 parts3GPL-3.0
  • 2 layers40 × 27 mmSensor board voc temp, the printed circuit board in 3D

    Sensor board voc temp

    adamvirovecz/sensor-board-voc-temp

    VOC, Humidity and Temperature Sensor Board

    39 parts1MIT
  • 4 layers62.9 × 88.3 mmAirgradient go main, the printed circuit board in 3D

    Airgradient go main

    Open-Air-Foundation/pcb-go

    AirGradient GO is a handheld air quality monitor. It measures particulate matter (Sensirion SPS30), CO₂ (Senseair S12), VOC/NOx (SGP41), temperature and humidity (SHT4x), and barometric pressure (DPS368), with an…

    194 parts1CC-BY-SA-4.0
  • 2 layers75 × 75 mmAir quality pcb, the printed circuit board in 3D

    Air quality pcb

    aleemacc/air_quality_sensor

    PCB design for a custom air quality measuring device

    30 parts
  • 6 layers60 × 100 mmSenseboard, the printed circuit board in 3D

    Senseboard

    CPSLO-AI-Campus-Fire-Detection/senseboard

    PCB for sensor stack and compute for fire detection system

    109 partsAGPL-3.0
  • 2 layers7.2 × 41.9 mmSensor puck, the printed circuit board in 3D

    Sensor puck

    david072/sensor_puck

    60 parts

Questions

How big is the SGP41 PCB?

It measures 12.1 × 23.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SGP41 use?

16 parts, built around the SGP41-D-R4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SGP41 KiCad files?

From the lilylab-dev/sgwdaughterboards repository on GitHub, at the commit this page was made from: the board is SGP41/pp.kicad_pcb and its schematic BME688/pp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SGP41 design in my own project?

Its repository states no licence, so its author keeps all rights: ask lilylab-dev before reusing the design.