
WindowWatcher1 PCBA
lilithdotgov/Bird-Strike-Detector
We implore any and all researchers or citizen scientists to try creating their own device (when this repository is properly updated) and capture data as well!

We implore any and all researchers or citizen scientists to try creating their own device (when this repository is properly updated) and capture data as well!
WindowWatcher1 is an open-source printed circuit board by lilithdotgov, from the lilithdotgov/Bird-Strike-Detector repository on GitHub. It is a 4-layer board of 44 × 55 mm with 8 parts on 39 nets, routed with 56 tracks and 17 vias.
It is built around the ADXL343BCC. Its parts include 2 resistors, 2 connectors, 1 capacitor and 1 diode. It belongs with the RP2040 boards of this library.
Maintained by the Urban Ecology Lab (UEL) at the New Jersey Institute of Technology (NJIT)
Formally known as the Looking Glass, it is an accelerometer-based device for detecting when a bird flies into a window. This repository will eventually hold all the files needed for one to create their own device and monitor bird strikes! Further information with a step-by-step assembly guide will eventually be hosted on another website.
Bird strikes are one of the leading causes of human-driven mass mortality of avian species, with an estimated 1 Billion fatalities each year from window collisions in the United States alone. Yet, key details of these events such as the exact window or time of collision are not known as most studies rely on witnessing the aftermath of a strike (e.g., a carcass or blood on the window). Our Looking Glass devices intend to bridge this gap in knowledge by being an affordable, long-lasting solution to this problem.
We implore any and all researchers or citizen scientists to try creating their own device (when this repository is properly updated) and capture data as well!
The Looking Glass is simple, it currently consists of a microcontroller (Pico 2 W), an accelerometer (ADXL343), some batteries (4xAA NiMH), an enclosure, and suction cups which allow it to attach to a window. It is designed to go to a low-power state and wake up when the accelerometer detects a forceful vibration on the window. It then records the accelerometer data, stores it locally, timestamps it via NTP, and attempts to send the data to a github repository for storage. If it fails to send the data it will continue to be stored locally, upon the next time a strike occurs it will attempt to send both the new data and old data to the github repository.
This data can then be later turned into a .csv for analysis to remove erroneous data points or make inferences on strike patterns.
As it currently stands neither the full step-by-step instructions nor all the necessary files for assembly are currently hosted on this repository. This is partly due to a current effort to further improve the design and assembly process before committing to a proper guide. However, please reach out privately to lilithdotgov to discuss interest in personal assembly.
Currently, if planning to create a decent batch size (20+) the cost per device is roughly $20–$30 USD (may vary with taxes and shipping costs). Although, the price is very flexible as many parts could be replaced with other parts at a cost of convenience, likewise, an easier assembly can be achieved for a greater cost. Simply having access to a 3d printer would eliminate as much as 1/4th the material costs and much of the assembly process. However, efforts will be made to provide individuals with many different options depending on whether or not they wish to prioritize cost or assembly time.
Currently available are the files for the PCB design using both THT and SMD components with PCBA markings for specific components.
BWC contains all the C code that each device is to be flashed with.
analysis currently only contains bin2csv.py which converts the .bin files that contain strike data into a .csv. Currently work is being done on a robust analysis tool to make labelling data streamlined and partially automated.
dependencies includes a port of the littlefs filesystem for the pico series boards.
assembly currently contains the KiCAD files for the PCB. Files for a 3d printed enclosure and further assembly instructions will be added in the future.
We have yet to choose a license, when all the materials for assembly are added expect to see an update in that regard!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x01 | TestPoint:TestPoint_Pad_4.0x4.0mm | J1, J2 |
| 2 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | ADXL343 | Package_LGA:LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | Acc |
| 1 | C | Capacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mm | C1 |
| 1 | RaspberryPi_Pico_W | Module:RaspberryPi_Pico_W_SMD_HandSolder | PW2 |

lilithdotgov/Bird-Strike-Detector
We implore any and all researchers or citizen scientists to try creating their own device (when this repository is properly updated) and capture data as well!

acha666/RP2040_ToolheadPCB_SB
A Toolhead PCB for VORON StealthBurner based on RP2040

porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike


exysta/2425_ESE_Projet_TagBot
Vous vous trouvez actuellement dans le projet TagBot (ou robot chat), qui s'intègre à un projet de classe où chaque équipe doit concevoir un robot.

Churrosoft/uEFI-v6.x
Speeduino compatible board, x4 ignition channels, x4 injection channels, 2&4 wire IAC

fatihdedeic/ADXL343-Eval-Board
Small footprint I2C protocol evaluation board designed for ADXL343 series accelerometers.

MohamedBenabdelhadi/2425_ESE_Projet_V-NOM
Mohamed Benabdelhadi_Nouhaila Faris_Oliver Belliard_Valerian Priou

shxshxshxshx/VoronToolheadPCB
USB Toolhead Board for Voron Stealthburner
It measures 44 × 55 mm and has 4 copper layers, 1.6 mm thick.
8 parts, built around the ADXL343BCC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lilithdotgov/Bird-Strike-Detector repository on GitHub, at the commit this page was made from: the board is assembly/KiCAD PCB files/WindowWatcher1.kicad_pcb and its schematic assembly/KiCAD PCB files/WindowWatcher1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lilithdotgov before reusing the design.