2 layers75 × 45 mm
2 layers66 × 48 mm
- Size
- 66 × 48 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 18
- Pads
- 46
- Tracks, vias
- 65, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Mar 2024
- Updated
- 7 May 2024
Overview
Node V10 is an open-source printed circuit board by LiamHowell, from the LiamHowell/PlantPulse---Node---PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 66 × 48 mm with 14 parts on 18 nets, routed with 65 tracks and 0 vias.
Its parts include 6 connectors, 2 resistors and 2 ICs.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 1 | GND_Test | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP1 |
| 1 | MCU | Footprints-General:Xiao-S3 | U1 |
| 1 | Nano Power Timer | Footprints-General:Nano Power Timer | U2 |
| 1 | PiicoDev | Footprints-General:PiicoDev Breadboard | J5 |
| 1 | Soil Sensor - 1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Soil Sensor - 2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Soil Sensor - 3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Soil Sensor - 4 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Vbatt Test | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | TP2 |
| 1 | Xiao Battery Connectors | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J6 |
The 12 most common of 14 parts.
Questions
How big is the Node V10 PCB?
It measures 66 × 48 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Node V10 use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Node V10 KiCad files?
From the LiamHowell/PlantPulse---Node---PCB repository on GitHub, at the commit this page was made from: the board is Node V10/Node V10.kicad_pcb and its schematic Node V10/Node V10.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Node V10 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from LiamHowell/PlantPulse---Node---PCB
1Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
