Skip to the content
2 layers67.5 × 44.5 mmPower SupplementalMonitoringPCB, the printed circuit board in 3D

Power SupplementalMonitoringPCB

lhr-solar/Power-SupplementalMonitoringPCB
Size
67.5 × 44.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
64
Nets
77
Pads
221
Tracks, vias
319, 40
Pours
3
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
21 Nov 2020
Updated
8 Feb 2025

Overview

Power SupplementalMonitoringPCB is an open-source printed circuit board by lhr-solar, from the lhr-solar/Power-SupplementalMonitoringPCB repository on GitHub. It is a 2-layer board of 67.5 × 44.5 mm with 64 parts on 77 nets, routed with 319 tracks and 40 vias.

It is built around the RI3-1205S, RI3-1215S and CDSOT23-T24CAN. Its parts include 23 capacitors, 9 resistors, 7 ICs, 5 connectors and 2 diodes. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

Power-SupplementalMonitoringPCB

Parts

64
QtyValueFootprintReferences
60.1uCapacitor_SMD:C_0805_2012MetricC4, C5, C6, C8, C9, C10
4M3MountingHole:MountingHole_3mmH1, H2, H3, H4
30.1uFCapacitor_SMD:C_0805_2012MetricC13, C14, C18
20.01uFCapacitor_SMD:C_0805_2012MetricC15, C19
210kResistor_SMD:R_0805_2012MetricR4, R6
210uUTSVT_Passive:C_2220_5750MetricC20, C23
210uCapacitor_SMD:C_0805_2012MetricC21, C22
210uFCapacitor_SMD:C_0805_2012MetricC12, C17
212pCapacitor_SMD:C_0805_2012MetricC1, C2
22kHInductor_SMD:L_0805_2012MetricL1, L2
2CAN_OutUTSVT_Connectors:Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_VerticalJ2, J3
2PowerOnLED_SMD:LED_0805_2012MetricD1, D2
1+12V_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP3
1+15V_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP8
1+3.3V_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP7
1+5V_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP5
10Resistor_SMD:R_0805_2012MetricR1
10.22uFCapacitor_SMD:C_0805_2012MetricC16
11.5kResistor_SMD:R_0805_2012MetricR3
111kResistor_SMD:R_0805_2012MetricR8
1120Resistor_SMD:R_0805_2012MetricR2
11uCapacitor_SMD:C_0805_2012MetricC7
12.2kResistor_SMD:R_0805_2012MetricR7
12.2uCapacitor_SMD:C_0805_2012MetricC3
124kResistor_SMD:R_0805_2012MetricR9
14.7uCapacitor_SMD:C_0805_2012MetricC11
16.2kResistor_SMD:R_0805_2012MetricR5
18MCrystal:Crystal_SMD_TXC_7A-2Pin_5x3.2mmY1
1ADM3055EUTSVT_ICs:SOIC-20W_7.5x15.4mm_Pitch1.27mmU2
1CAN_HTestPoint:TestPoint_Keystone_5005-5009_CompactTP1
1CAN_LTestPoint:TestPoint_Keystone_5005-5009_CompactTP2
1CDSOT23-T24CANPackage_TO_SOT_SMD:SOT-23WU3
1Dr. HallockUTSVT_Special:Hallock_Image_TinyLOGO1
1GNDPWR_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP4
1GND_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP6
1NCP1117-3.3_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U5
1OPAx192-Q1Package_SO:VSSOP-8_3.0x3.0mm_P0.65mmU7
1PowerConnUTSVT_Connectors:Molex_MicroFit3.0_1x2xP3.00mm_PolarizingPeg_VerticalJ4
1RI3-1205SUTSVT_ICs:RI3_DC_ConverterU4
1RI3-1215SUTSVT_ICs:RI3_DC_ConverterU6
1ResetButton_Switch_SMD:SW_SPST_B3SL-1002PSW1
1STM32F413RHTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1SWDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1SuppPowerConnectorUTSVT_Connectors:Molex_MicroFit3.0_1x2xP3.00mm_PolarizingPeg_VerticalJ5
1UTSVTUTSVT_Special:UTSVT_Logo_SymbolLOGO2

Similar boards

  • 2 layers100 × 75 mmBPSMaster, the printed circuit board in 3D

    BPSMaster

    corbosiny/SolarCar

    All code relating to solar car like: BPS, telemetry, web dev, and more.

    180 parts3
  • 2 layers100 × 75 mmDashboard, the printed circuit board in 3D

    Dashboard

    koson/Electronics

    Contains all Schematics/PCB files for each electrical system.

    150 parts
  • 2 layers100 × 75 mmBPS Leader, the printed circuit board in 3D

    BPS Leader

    lhr-solar/BPS-LeaderPCB

    153 parts
  • 2 layers79.3 × 97.5 mmControls Leader, the printed circuit board in 3D

    Controls Leader

    lhr-solar/Controls-LeaderPCB

    187 parts
  • 2 layers95 × 82 mmTelemetry Primary, the printed circuit board in 3D

    Telemetry Primary

    lhr-solar/DataAcq-SunlightPCB

    This hardware includes a GPS, IMU, SD Card Reader, CAN interface, and Ethernet interface. The software on this board is responsible for data collection on the solar vehicle.

    148 parts
  • 4 layers115 × 85 mmCurve tracer, the printed circuit board in 3D

    Curve tracer

    lhr-solar/Power-Generation-Curve-Tracer

    The current maintainer of this project is Matthew Yu as of 05/20/2023. His email is matthewjkyu@gmail.com.

    94 parts4
  • 4 layers100 × 100 mmPS BPSLeader, the printed circuit board in 3D

    PS BPSLeader

    lhr-solar/PS-BPSLeader

    Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

    388 parts3MIT
  • 4 layers120.1 × 60 mmMppt, the printed circuit board in 3D

    Mppt

    dimembermatt/MPPT-Design

    Design and documentation of a custom MPPT for LHR Solar. Created in part with Professor Alex Hanson's ECE 394J Power Electronics Class.

    156 parts2

Questions

How big is the Power SupplementalMonitoringPCB PCB?

It measures 67.5 × 44.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Power SupplementalMonitoringPCB use?

64 parts, built around the RI3-1205S, RI3-1215S and CDSOT23-T24CAN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Power SupplementalMonitoringPCB KiCad files?

From the lhr-solar/Power-SupplementalMonitoringPCB repository on GitHub, at the commit this page was made from: the board is Power-SupplementalMonitoringPCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Power SupplementalMonitoringPCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask lhr-solar before reusing the design.