Skip to the content
2 layers100 × 75 mmBPS Leader, the printed circuit board in 3D
Size
100 × 75 mm
Copper layers
2
Thickness
1.6 mm
Parts
153
Nets
160
Pads
563
Tracks, vias
1,051, 142
Pours
8
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
2 Aug 2020
Updated
28 May 2023

Overview

BPS Leader is an open-source printed circuit board by lhr-solar, from the lhr-solar/BPS-LeaderPCB repository on GitHub. It is a 2-layer board of 100 × 75 mm with 153 parts on 160 nets, routed with 1,051 tracks and 142 vias.

It is built around the CP2102N-A01-GQFN24, RI3-1205S and LTC6820HMS, with the CDSOT23-T24CAN, HX1188FNLT and NTR4003NT1G among its other parts. Its parts include 43 capacitors, 41 resistors, 18 ICs, 15 diodes and 13 connectors. It belongs with the STM32 boards of this library.

Main components

11

README

README.md

BPS Leader Board

Purpose

This board runs the BPS system. It communicates with the Voltage & Temperature Minion Boards & Amperes Board over ISOSPI, and the rest of the electrical system with CAN. It controls the Contactors & Fans with 12V digital signals (PWM or just on/off).

Connectors

The board requires seven connectors:

  • One 2-pin Power Connector (+12V, PWRGND)
  • One 2-pin strobe light connector (+12V, PWRGND)
  • One 4-pin contactor connector (+12V, PWRGND, aux1, aux2)
    • The aux pins detect if the Contactor is opened or closed through an Open Drain input.
  • One 4-pin Amperes board connector (+12V, PWRGND, IP, IM)
  • One 4-pin CAN connector (isolated +5V, isolated GND, CAN high, CAN low)
  • One 2-pin Minion connector (IP, IM)
  • One 2x4-pin fan connector (4x +12V, 4x PWRGND)

Lights

  • An LED next to the contactor pin turns on when the Contactors are closed
  • An LED next to the Power Connector turns on when 12V is applied to the board
  • The column of LED's in the middle of the board are used to provide debugging information

BOM

https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=ebf45c0b24

Parts

153
QtyValueFootprintReferences
220.1uCapacitor_SMD:C_0805_2012MetricC4, C10, C15, C16, C17, C18, C19, C20, C25, C26, C30, C32, C36, C37, C38, C39 +6
8750Resistor_SMD:R_0805_2012MetricR4, R5, R6, R7, R9, R10, R11, R12
710uCapacitor_SMD:C_0805_2012MetricC13, C14, C21, C24, C29, C33, C41
6SI8261ABC-ISPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU8, U11, U13, U14, U15, U16
50Resistor_SMD:R_0805_2012MetricR19, R23, R26, R28, R32
51uCapacitor_SMD:C_0805_2012MetricC7, C22, C23, C34, C42
410kResistor_SMD:R_0805_2012MetricR20, R24, R29, R33
4118Resistor_SMD:R_0805_2012MetricR37, R38, R39, R40
4M.3MountingHole:MountingHole_3mmMH1, MH2, MH3, MH4
3120Resistor_SMD:R_0805_2012MetricR17, R18, R27
34.7kResistor_SMD:R_0805_2012MetricR2, R3, R41
34.7uCapacitor_SMD:C_0805_2012MetricC3, C11, C35
20.01uCapacitor_SMD:C_0805_2012MetricC27, C31
21.21kResistor_SMD:R_0805_2012MetricR15, R16
21.5kResistor_SMD:R_0805_2012MetricR1, R21
212pCapacitor_SMD:C_0805_2012MetricC1, C2
21kResistor_SMD:R_0805_2012MetricR25, R36
22kInductor_SMD:L_0805_2012MetricL1, L2
2470Resistor_SMD:R_0805_2012MetricR22, R31
2806Resistor_SMD:R_0805_2012MetricR13, R14
2LTC6820Package_SO:MSOP-16_3x4mm_P0.5mmU5, U6
2NTR4003NT1GPackage_TO_SOT_SMD:SOT-23Q1, Q3
2VND5N07-EPackage_TO_SOT_SMD:TO-252-2Q2, Q4
1+12V_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP1
1+3.3V_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP5
1+5V_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP3
10.22uCapacitor_SMD:C_0805_2012MetricC28
11.6kResistor_SMD:R_0805_2012MetricR30
110uUTSVT_Passive:C_2220_5750MetricC12
122.1kResistor_SMD:R_0805_2012MetricR34
147.5kResistor_SMD:R_0805_2012MetricR35
1680Resistor_SMD:R_0805_2012MetricR8
18MCrystal:Crystal_SMD_TXC_7A-2Pin_5x3.2mmY1
1ADM3055EUTSVT_ICs:SOIC-20W_7.5x15.4mm_Pitch1.27mmU9
1B3SL-1002PButton_Switch_SMD:SW_SPST_B3SL-1002PSW1
1BAS70-04Package_TO_SOT_SMD:SOT-23D13
1CAN AnalyzerConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1CANErrorLED_SMD:LED_0805_2012MetricD9
1CAN_HTestPoint:TestPoint_Keystone_5005-5009_CompactTP7
1CAN_LTestPoint:TestPoint_Keystone_5005-5009_CompactTP8
1CAN_OutUTSVT_Connectors:Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_VerticalJ10
1CDSOT23-T24CANPackage_TO_SOT_SMD:SOT-23WU10
1CP2102N-A01-GQFN24Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU12
1ContactorConnUTSVT_Connectors:Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_VerticalJ9
1ContactorEnLED_SMD:LED_0805_2012MetricD11
1ContactorGate_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP6
1Current SPI AnalyzerConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1CurrentConnUTSVT_Connectors:Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_VerticalJ8
1Dr. HallockUTSVT_Special:Hallock_Image_SmallLOGO1
1ErrorLightConnUTSVT_Connectors:Molex_MicroFit3.0_1x2xP3.00mm_PolarizingPeg_VerticalJ11
1FanBrdConnConnector_Molex:Molex_Micro-Fit_3.0_43045-0612_2x03_P3.00mm_VerticalJ13
1FaultLED_SMD:LED_0805_2012MetricD14
1GNDPWR_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP2
1GND_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP4
1GPIO AnalyzerConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ1
1HX1188FNLUTSVT_BPS:HXXXXU7
1HeartbeatLED_SMD:LED_0805_2012MetricD6
1M24128Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU4
1MCP112Package_TO_SOT_SMD:SOT-23U17
1MinionConnUTSVT_Connectors:Molex_MicroFit3.0_1x2xP3.00mm_PolarizingPeg_VerticalJ7
1NCP1117-3.3_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U3
1OCurrLED_SMD:LED_0805_2012MetricD5
1OTempLED_SMD:LED_0805_2012MetricD4
1OVoltLED_SMD:LED_0805_2012MetricD3
1OtherLED_SMD:LED_0805_2012MetricD10
1PowerConnUTSVT_Connectors:Molex_MicroFit3.0_1x2xP3.00mm_PolarizingPeg_VerticalJ6
1PowerOnLED_SMD:LED_0805_2012MetricD1
1RI3-1205SUTSVT_ICs:RI3_DC_ConverterU2
1RN4871-IRF_Module:Microchip_RN4871U18
1SP0503BAHTGPackage_TO_SOT_SMD:SOT-143D15
1STM32F413RHTxPackage_QFP:LQFP-64_10x10mm_P0.5mmU1
1SWDConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ5
1StrobeLightGate_TPTestPoint:TestPoint_Keystone_5005-5009_CompactTP9
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J12
1UTSVT LogoUTSVT_Special:UTSVT_Logo_SymbolLOGO2
1UVoltLED_SMD:LED_0805_2012MetricD2
1V2F22HM3/HUTSVT_Passive:V2F22HMD12
1Volt/Temp SPI AnalyzerConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ2
1WDErrorLED_SMD:LED_0805_2012MetricD8
1WireLED_SMD:LED_0805_2012MetricD7

Similar boards

  • 2 layers100 × 75 mmBPSMaster, the printed circuit board in 3D

    BPSMaster

    corbosiny/SolarCar

    All code relating to solar car like: BPS, telemetry, web dev, and more.

    180 parts3
  • 2 layers100 × 75 mmDashboard, the printed circuit board in 3D

    Dashboard

    koson/Electronics

    Contains all Schematics/PCB files for each electrical system.

    150 parts
  • 2 layers79.3 × 97.5 mmControls Leader, the printed circuit board in 3D

    Controls Leader

    lhr-solar/Controls-LeaderPCB

    187 parts
  • 2 layers95 × 82 mmTelemetry Primary, the printed circuit board in 3D

    Telemetry Primary

    lhr-solar/DataAcq-SunlightPCB

    This hardware includes a GPS, IMU, SD Card Reader, CAN interface, and Ethernet interface. The software on this board is responsible for data collection on the solar vehicle.

    148 parts
  • 2 layers40 × 35 mmBPS Amperes, the printed circuit board in 3D

    BPS Amperes

    lhr-solar/BPS-AmperesPCB-Daybreak

    52 parts
  • 2 layers100 × 100 mmProject RedGlow, the printed circuit board in 3D

    Project RedGlow

    ASURacingTeam/ICE-EngineControlUnit

    503 parts
  • 2 layers66 × 100 mmContactorDriver, the printed circuit board in 3D

    ContactorDriver

    lhr-solar/Contactor-DriverPCB

    LED Purposes -D1: Green LED used to indicate 12V board power -D2: Green LED used to indicate contactor status -D3: Green LED used to indicate precharge circuit status

    37 parts

Questions

How big is the BPS Leader PCB?

It measures 100 × 75 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BPS Leader use?

153 parts, built around the CP2102N-A01-GQFN24, RI3-1205S, LTC6820HMS and CDSOT23-T24CAN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BPS Leader KiCad files?

From the lhr-solar/BPS-LeaderPCB repository on GitHub, at the commit this page was made from: the board is BPS-Leader.kicad_pcb and its schematic BPS-Leader.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BPS Leader design in my own project?

Its repository states no licence, so its author keeps all rights: ask lhr-solar before reusing the design.