
BOOSTV2
zhaque3/DC-DC-Boost-Converter
A repository consisting of the PCB Design and firmware for DC-DC Boost converter on the University of Alberta EcoCar vehicle.

RfReciever is an open-source printed circuit board by lhr-solar, from the lhr-solar/DataAcq-Receiver repository on GitHub. It is a 4-layer board of 22.8 × 36.5 mm with 40 parts on 57 nets, routed with 261 tracks and 52 vias.
It is built around the FT234XD-R and USBLC6-2SC6. Its parts include 14 resistors, 10 capacitors, 4 connectors, 3 ICs and 3 diodes.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R8, R9, R11 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric | R10, R12, R17 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric | R15, R16, R18 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6, C10, C11 |
| 3 | 47pF | Capacitor_SMD:C_0805_2012Metric | C5, C12, C13 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D7, D8, D9 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R7, R13 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 27 | Resistor_SMD:R_0805_2012Metric | R14, R19 |
| 2 | Conn_01x02 | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Left | J2, J3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 5.1K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | DigiXBeeRX900Micro | rfReciever-Footprints:XBeeXR900RFMicro | X1 |
| 1 | EM Wave | rfReciever-Footprints:emWave | LOGO3 |
| 1 | FT234XD-R | rfReciever-Footprints:SON45P300X300X80-13N | U3 |
| 1 | MOLEX 1054440001 | rfReciever-Footprints:MOLEX_1054440001 | J1 |
| 1 | RF Hazard | rfReciever-Footprints:RFHazard | LOGO2 |
| 1 | RF_RESET | Button_Switch_SMD:SW_SPST_CK_KMS2xxGP | SW1 |
| 1 | RF_SLEEP | Button_Switch_SMD:SW_SPST_CK_KMS2xxGP | SW2 |
| 1 | Stock Broker | rfReciever-Footprints:stockBroker | LOGO1 |
| 1 | TLV70130DBVR | rfReciever-Footprints:DBV5 | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |

zhaque3/DC-DC-Boost-Converter
A repository consisting of the PCB Design and firmware for DC-DC Boost converter on the University of Alberta EcoCar vehicle.

antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering






znuh/usb2serial-autovtg
USB to serial converter with automatic target voltage detection, buffered IOs, 1.8V to 5V support and backflow current protection
It measures 22.8 × 36.5 mm and has 4 copper layers, 1.6 mm thick.
40 parts, built around the FT234XD-R and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lhr-solar/DataAcq-Receiver repository on GitHub, at the commit this page was made from: the board is rfReciever.kicad_pcb and its schematic rfReciever.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lhr-solar before reusing the design.