Skip to the content
4 layers22.8 × 36.5 mmRfReciever, the printed circuit board in 3D
Size
22.8 × 36.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
40
Nets
57
Pads
157
Tracks, vias
261, 52
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Nov 2024
Updated
19 May 2025

Overview

RfReciever is an open-source printed circuit board by lhr-solar, from the lhr-solar/DataAcq-Receiver repository on GitHub. It is a 4-layer board of 22.8 × 36.5 mm with 40 parts on 57 nets, routed with 261 tracks and 52 vias.

It is built around the FT234XD-R and USBLC6-2SC6. Its parts include 14 resistors, 10 capacitors, 4 connectors, 3 ICs and 3 diodes.

Main components

2

README

README.md

DataAcq-Receiver

Parts

40
QtyValueFootprintReferences
310KResistor_SMD:R_0805_2012MetricR8, R9, R11
310kResistor_SMD:R_0805_2012MetricR10, R12, R17
31KResistor_SMD:R_0805_2012MetricR15, R16, R18
31uFCapacitor_SMD:C_0805_2012MetricC6, C10, C11
347pFCapacitor_SMD:C_0805_2012MetricC5, C12, C13
3LEDLED_SMD:LED_0805_2012MetricD7, D8, D9
21kResistor_SMD:R_0805_2012MetricR7, R13
21uCapacitor_SMD:C_0805_2012MetricC8, C9
227Resistor_SMD:R_0805_2012MetricR14, R19
2Conn_01x02Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1LeftJ2, J3
1100nFCapacitor_SMD:C_0805_2012MetricC2
110uFCapacitor_SMD:C_0805_2012MetricC7
15.1KResistor_SMD:R_0805_2012MetricR4
1Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ4
1DigiXBeeRX900MicrorfReciever-Footprints:XBeeXR900RFMicroX1
1EM WaverfReciever-Footprints:emWaveLOGO3
1FT234XD-RrfReciever-Footprints:SON45P300X300X80-13NU3
1MOLEX 1054440001rfReciever-Footprints:MOLEX_1054440001J1
1RF HazardrfReciever-Footprints:RFHazardLOGO2
1RF_RESETButton_Switch_SMD:SW_SPST_CK_KMS2xxGPSW1
1RF_SLEEPButton_Switch_SMD:SW_SPST_CK_KMS2xxGPSW2
1Stock BrokerrfReciever-Footprints:stockBrokerLOGO1
1TLV70130DBVRrfReciever-Footprints:DBV5U1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2

Similar boards

  • 2 layersBOOSTV2, the printed circuit board in 3D

    BOOSTV2

    zhaque3/DC-DC-Boost-Converter

    A repository consisting of the PCB Design and firmware for DC-DC Boost converter on the University of Alberta EcoCar vehicle.

    77 parts
  • 4 layers128.5 × 40 mmScalenode cm4-baseboard, the printed circuit board in 3D

    Scalenode cm4-baseboard

    antmicro/scalenode-cm4-baseboard

    Baseboard for Raspberry Pi 4 Compute Module optimized for clustering

    146 parts152Apache-2.0
  • 4 layers172.7 × 135.9 mmJJ65c02, the printed circuit board in 3D

    JJ65c02

    jimjag/JJ6502

    My 6502 Based Breadboard Project

    53 parts26MIT
  • 4 layers150 × 50 mmQI Charger, the printed circuit board in 3D

    QI Charger

    drewsum/QI_Charger

    A DIY QI Wireless Phone Charger

    322 parts20
  • 8 layers100 × 100 mmThermal Camera, the printed circuit board in 3D

    Thermal Camera

    drewsum/Thermal_Camera

    DIY Thermal Camera

    559 parts19
  • 8 layers126 × 117 mmDemo board, the printed circuit board in 3D

    Demo board

    azonenberg/electronics-training

    Training materials for classes etc

    311 parts15
  • 2 layers12 × 31 mmB ART typeU, the printed circuit board in 3D

    B ART typeU

    idt12312/B-ART

    UARTをBLEで飛ばすモジュール

    22 parts11MIT
  • 2 layers24 × 18 mmUsb2serial autovtg, the printed circuit board in 3D

    Usb2serial autovtg

    znuh/usb2serial-autovtg

    USB to serial converter with automatic target voltage detection, buffered IOs, 1.8V to 5V support and backflow current protection

    38 parts9CC-BY-SA-4.0

Questions

How big is the RfReciever PCB?

It measures 22.8 × 36.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the RfReciever use?

40 parts, built around the FT234XD-R and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RfReciever KiCad files?

From the lhr-solar/DataAcq-Receiver repository on GitHub, at the commit this page was made from: the board is rfReciever.kicad_pcb and its schematic rfReciever.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RfReciever design in my own project?

Its repository states no licence, so its author keeps all rights: ask lhr-solar before reusing the design.