
OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware

Automated Chess System
CNChess KiCad is an open-source printed circuit board by LepTho2233127, from the LepTho2233127/CNChess repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 83.7 × 50.9 mm with 32 parts on 40 nets, routed with 307 tracks and 83 vias.
It is built around the ESP32-C3F. Its parts include 6 resistors, 5 connectors, 4 capacitors, 4 diodes and 3 switches. It belongs with the ESP32 and RISC-V boards of this library.
Automated chess board for playing against chess engine. For more information concerning the hardware needed visit the wiki
git clone <REPO_URL>sudo apt update && sudo apt upgradewinget install --interactive --exact dorssel.usbipd-win[!IMPORTANT] Run the following commands as admin in PowerShell. You also need to keep a WSL active
usbipd list
usbipd bind --busid 4-4
usbipd attach --wsl --busid <busid>In WSL, check if you see the device you just attached
lsusbsudo docker compose buildxhost +local:dockersudo docker compose run cnchesssudo docker compose down[!NOTE] If you are on a Linux operating systems, it is possible to not use Docker by following this procedure
sudo apt update
sudo apt install stockfish
which stockfish[!IMPORTANT] If path obtained when running which command is not /usr/games/stockfish, you need to change it in CNChess.py file manually
Inside CNChess directory run :
cd python
python -m venv .venv
source .venv/bin/activate
pip install -r requirements.txtWith right hardware, run this command in python directory with virtual environment activated
python main.pyIf no camera or serial port is detected, you might need to change it respectively inside Cam.py or Communication.py.
Additional software documentation is available and generated using MkDocs docs. Run mkdocs build inside project directory to build it.
Located inside docs_build directory, open in a browser to access it.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 270 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2, R3, R5 |
| 2 | 0.1uF | CNChess_footprints:CAP0_1u | C1, C2 |
| 2 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3, C4 |
| 2 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4, R6 |
| 2 | Driver | CNChess_footprints:TMC2209 | TMC1, TMC2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2 |
| 1 | 1000 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 12V LED | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D1 |
| 1 | 3V3 LED | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D2 |
| 1 | Barrel_Jack | CNChess_footprints:BarrelJack_Horizontal | J1 |
| 1 | ESP32C3 | CNChess_footprints:Esp32-C3 | U1 |
| 1 | Fan | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | LSW1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW1 |
| 1 | LSW2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW2 |
| 1 | Motor1 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Motor2 | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J3 |
| 1 | OOSW | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | SW3 |
| 1 | Power_Regulator | CNChess_footprints:Reg_12V | U2 |
| 1 | Servomotor | Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J4 |
| 1 | TP12V | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | TP5V | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | TPSW1 | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | TPSW2 | TestPoint:TestPoint_Pad_D1.5mm | TP4 |
| 1 | X | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D3 |
| 1 | Y | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | D4 |

aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware



sini6a/internet-radio-speaker
An open-source ESP32 Internet Radio Player with simple programming, USB charging, and on-the-go capability using a single-cell Li-ion battery.

NguyenThanhHuy-debug/PCB_IoT-Heart-rate-ECG-Monitoring-Device
The PCBIoT-Heart-rate-ECG-Monitoring-Device repository provides open-source hardware design files for an IoT-enabled electrocardiogram (ECG) and heart-rate monitoring device.


Alexander-T-Moss/AERIS
Open-source air quality monitor built around an ESP32 microcontroller, SEN55 module and custom breakout board.

neggles/esp-pmsa
Makefile uses Jan Mrázek's KiKit, which I cannot recommend enough, and therefore has to be available on your system.
It measures 83.7 × 50.9 mm and has 2 copper layers, 1.6 mm thick.
32 parts, built around the ESP32-C3F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LepTho2233127/CNChess repository on GitHub, at the commit this page was made from: the board is CNChess_KiCad/CNChess_KiCad.kicad_pcb and its schematic CNChess_KiCad/CNChess_KiCad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).